TUFFBOY 8” Composite Shims for Indoor/Outdoor use. 12 Pack Heavy Duty Never Rot Wedges, Extreme Load Support, Easy to snap DIY Levelers for Home Improvement, Furniture, Doors, Windows, Sheds and More.
- SUPER STRONG AND DURABLE: TUFFBOY Plastic wedge shims are stackable and made of 100% high quality recycled plastic materials, that has a 30% more load support and pressure than wooden shims, making it perfect for all your leveling, repairs, and home improvement projects..
- INDOOR/OUTDOOR MULTI-USE WEDGES: The 8-inch composite shims can be used for a wide variety of different projects both indoors and outdoors. Use TUFFBOY Heavy Duty Shims for Leveling, Plumbing, Appliances, Cabinets, Countertops, Doors, Windows, Furniture, Decks, Spas, Fountains, Gazebos, Mailboxes and more!.
- NEVER-ROT AND WEATHER PROOF: The Durable material of these Never Rot shim levelers is Water proof and resistant to decay. Unlike wooden shims, these plastic shims will not rot, warp, swell, crack, or split, holding up to rain, show and other tough or extreme outdoor conditions. TuffBoy composite shims will last you a lifetime..
- EASILY & CLEANLY BREAK TO ANY SIZE: These 8” Plastic wedges are 4 times easier to snap than wood. With 37 Pre-scoured lines snapping is super easy and there is no need for additional cutting or trimming, saving time and energy. No tools required, simply measure and snap..
- VALUE PACK OF 12 (Made in USA): This economy pack of 12 (1 dozen) pre-scored composite ....
Check StockNEW RAM HYDRAULIC THROWOUT BEARING FOR STOCK CLUTCHES,WITH LINE,FITTINGS, AND SHIMS
- Brand New Ram Hydraulic Throwout Bearing for Stock Style Clutches (Ram Part #78125)..
- Works with Saginaw, Muncie, GM T-10, & Jerico transmissions, as well as any transmission that has a bearing retainer collar with an outside diameter of 1.375" or less, as the inside diameter of this throwout bearing is 1.380"..
- Will not fit T-5 or non-GM T-10 transmissions * Fits stock style clutches * Snap ring on collar keeps the bearing from blowing apart if over-extended.
- Includes a set of conical shims to properly fit the bearing..
- Also includes 2 different installation studs, one 5/16"-18 and one 3/8"-16..
Check StockYukon (BK F9.75-D) Bearing Installation Kit for Ford 9.75\ Differential
- Yukon Bearing installation kits are perfect for shops and builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit.
- This kit uses Timken bearings and races along with all high quality small parts.
- Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush.
- Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set.
Check StockNEW RAM HYDRAULIC THROWOUT BEARING FOR FORD TOPLOADER TRANSMISSIONS & STOCK C.
- Brand New Ram Hydraulic Throwout Bearing Kit (Ram Part #78136)..
- Works with Ford Toploader Transmissions that have a bearing retainer collar with an outside diameter of 1.375" or less, as the inside diameter of this throwout bearing is 1.380" * Toploaders either have an 1 1/16"-10 spline or 1 3/8"-10 spline input shaft.
- This bearing isn't big enough to work with the 1 3/8"-10 version. * In addition, some toploaders with an 1 1/16"-10 spline shaft have a larger retainer, so it's a good idea to measure the retainer collar to make sure it is 1.375" or less..
- Includes a set of conical shims to properly fit the bearing, installation stud, inlet, outlet, and conversion fittings, as well as a remote bleeder line..
Check StockNEW RAM HYDRAULIC THROWOUT BEARING FOR CHRYSLER TREMEC TRANSMISSIONS & STOCK
- Brand New Ram Hydraulic Throwout Bearing Kit for Stock Style Clutches with Chrysler Tremec Transmissions (Ram Part #78134)..
- Works with Chrysler Tremec Transmissions with a 1"-23 spline..
- Includes a replacement transmission collar to install on your Tremec..
- Also, includes a set of conical shims to properly fit the bearing, installation stud, inlet, outlet, and conversion fittings, as well as a remote bleeder line..
Check StockNEW RAM HYDRAULIC THROWOUT BEARING FOR FORD TREMEC TRANSMISSIONS,TKO 500,600
- Brand New Ram Hydraulic Throwout Bearing Kit for Stock Style Clutches with Ford Tremec Transmissions (Ram Part #78132)..
- Works with Ford Tremec Transmissions, including TKO 500 and TKO 600.
- Includes a replacement transmission collar to install on your Tremec..
- Also, includes a set of conical shims to properly fit the bearing, installation stud, inlet, outlet, and conversion fittings, as well as a remote bleeder line..
Check Stock
Composite Shims (36 Pack) - Hard Composite Shims for Home Improvement - Never Rot Shims for Leveling - Restaurant Table Shims - Table Wedges - Toilet Shims - DIY Furniture Levelers - Stock Your Home
- Proudly Made in the USA: Made of 100% recycled materials, our composite shims are great for leveling in both indoor and outdoor applications. Our stackable shims are a heavy duty solution to wooden wedges that won’t rot, warp, or crack. With 37 pre-scored lines, our composite shims are 4x easier to snap than wood. They also support more weight, allowing you to level heavy appliances, furniture, and more!.
- Never Rot Shims: Unlike wooden shims, our composite shims are rot-proof, and resistant to decay. Our never rot shims for leveling are also weather-proof, easily holding up to rain, snow, and other harsh conditions. In fact, our composite wedges won’t split or crack due to pressure. Our shims are able to support 30% heavier loads than wood. You can be sure that our shims will last you a lifetime..
- No Additional Cutting: Save time and energy with our pre-scored shims. Designed with 37 notches, there is no need for additional cutting or trimming with our furniture levelers. All you have to do is measure, and snap our shims to the size you need – no tools required!.
- Multipurpose Wedges: Whether you’re a professional or are working on some home improvement projects, our shims will help you get the job done right. Use our heavy duty composite shims f....
Check Stock
Composite Shims (24 Pack) - Hard Composite Shims for Home Improvement - Never Rot Shims for Leveling - Restaurant Table Shims - Table Wedges - Toilet Shims - DIY Furniture Levelers - Stock Your Home
- Proudly Made in the USA: Made of 100% recycled materials, our composite shims are great for leveling in both indoor and outdoor applications. Our stackable shims are a heavy duty solution to wooden wedges that won’t rot, warp, or crack. With 37 pre-scored lines, our composite shims are 4x easier to snap than wood. They also support more weight, allowing you to level heavy appliances, furniture, and more!.
- Never Rot Shims: Unlike wooden shims, our composite shims are rot-proof, and resistant to mold & decay. Our never rot shims for leveling are also weather-proof, easily holding up to rain, snow, and other harsh conditions. In fact, our composite wedges won’t split or crack due to pressure. Our shims are able to support 30% heavier loads than wood. You can be sure that our shims will last you a lifetime..
- No Additional Cutting: Save time and energy with our pre-scored shims. Designed with 37 notches, there is no need for additional cutting or trimming with our furniture levelers. All you have to do is measure, and snap our shims to the size you need - no tools required!.
- Multipurpose Wedges: Whether you’re a professional or are working on some home improvement projects, our shims will help you get the job done right. Use our heavy duty composite sh....
Check Stock
Qfeley Furniture Leveling Shims Table Shims, 12 Pack Rubbery Clear Table Shims, Level Wedge, Bed Shims,Toilet Shims, Furniture Leveling Shims Wedge Levelers for Home Improvement, Thin & Thick
- Size – furniture leveling shims measure about 1.9″x1.14″x0.2″ / 4.8×2.9×0.5cm in S size, about 1.9″x1.14″x0.4″ / 4.8×2.9x1cm in L size..
- Material – table shims are made of pvc, high quality and soft. Soft leveling shims ensures your furniture or tables will not be damaged. Furniture leveling shims also can be stacked together to create a higher wedge if necessary..
- Value package – you will get 12 pieces soft furniture leveling shims, including 8 pieces S size and 4 pieces L size clear rubbery table shims, sufficient quantity can nicely satisfy your daily usages and replacements..
- Design – our rubbery table shims designed with ribbed bottom surface, use to stabilize and level various objects and make rubber shims to hold the furniture firmly in place, prevent them slipping or sliding..
- Wide usage – table shims will fit under your toilet or furniture desk, designed to help fill in the gaps and help stop furniture rocking. Leveling shims are great for leveling bookcases, tables, doors, windows, cabinets and etc..
Check Stock
Musiclily Pro CNC Accurate Acrylic Tremolo Bridge Routing Templates Set for Floyd Rose Recessed Modification
- Recessing the tremolo creates extra clearance at the rear of the unit, and allows extra arm travel for super whammy action. The tremolo (and the strings) can be closer to the guitar's face, reducing the need for neck shims. For tremolos with 2-15/16" (74.61mm) mounting stud spacing. Includes shims. Accurate correct size and thickness, cutted by CNC machine, so you will not need to puzzle over cavity dimensions..
- Our crystal clear routing templates allow you to see the guitar body underneath, it will make your accurate template placement be easy.
- Outer dimension:150mm x 100mm (5-7/8 x 3-7/8 inch),237 x 148mm( 9-21/64 x 5-53/64 inch ), thickness 10mm (3/8 inch) , easy to get contact with the router bearing. Compatible with most standard routers and bits..
- Laser etched centerlines and depth measurements. Countersunk holes for anchoring the template with screws..
- To learn how to use this template, you can check Youtube's related "how to use a guitar pickup routing template" video , also can buy other suppliers' standard bit and tools to work with our template..
Check StockPillow Block Bearing, Bearing Steel hickened Mounted Self Aligning Rhombic Bearing3/4 inch 2 Bolt Pillow Block Flange Bearing, Self-Alignment, (2 Pack -UCFL204-12)
- Cast iron UCFL204-12 flange block housing increases life of the bearing.
- pillow block bearing 3/4 UC204-12 chrome steel bearing for efficient operations at a wide range of speeds.
- pillow block bearing 3/4 inch shaft Dynamic (radial) load rating of 12.8 kN and static (axial) load rating of 6.65 kN.
- pillow block bearing Set screw prevents shaft slippage.
- Dimensions: Item: UCFL204-12 Bearing Type: Mounted Bearings Bolt Size: M10 Basic Load (Cr): 12.8 KN Basic Load (Cor): 6.65 KN Bearing No: UC204-12 Bore: 3/4" Bolt hole to bolt hole: 3.543 in. (90mm) Overall length: 4.448 in. (113mm) Overall thickness: 1.312 in. (33.12mm) Bolt hole: 452 in. (11.5mm) Temp. Range: -40 Degrees to 250 Degrees F.
Check StockVarieties of Exotic Wood Pepper Mill Blank, Suitable Square Turning Blanks Measuring 3 x 3 x 12 Inches (1, BOCOTE)
- Snaps Four Times Easier and Cleaner Than Traditional Wood.
- 35% Better Load Support Than Traditional Wood.
Check StockNelson Wood Shims CSBP56 Cedar Shims 56 Count
- Shims are 8" long and tapered from 5/16" down to 1/32".
- 6 shims per job pack, 10 job packs per master display box and 12 master display boxes per pallet.
Check Stock
