Categories

Best Lock Use Solenoid

Benefast VTEC Solenoid Spool Valve w/Timing Oil Pressure Switch & Gasket Compatible with Honda Accord CR-V Element Civic Acura RSX Acura TSX Replacement# 15810-RAA-A01 15810-RAA-A03

  • The VTEC (Variable Valve Timing and Lift Electronic Control) system increases the amount of intake valve lift for increased power. It accomplishes this by turning a control solenoid 'ON' to allow oil pressure into the VTEC control passages to apply pins that will lock the intake rockers. When the oil pressure is present, the pressure switch signal will go high. When the control solenoid is turned 'OFF', the oil pressure is dumped and the oil pressure switch signal will go low..
  • If the pressure switch signal is not logical for the commanded state of the control solenoid, a DTC will set and the PCM will go into a 'fuel-cut' mode limiting engine rpm and performance. The PCM simply doesn't 'know' what the state of the intake valves are, so you end up with the symptoms you describe..
  • This VTEC Solenoid Fits for the Following Vehicles: Honda Accord 2003-2007, Honda Civic 2002-2005, Honda CR-V 2002-2009, Honda Element 2003-2011, Acura RDX 2002-2012, RSX 2002-2006, Acura TSX 2004 2005 2006 2007 2008..
  • Customers can find the product you need accurately according to the OE number. Replacement part number: 15810-RAA-A01, 15810-RAA-A02, 15810-RAA-A03, 15810-PNE-G01, 917-224, 917224, 15810RAAA01, 15810RAAA03, 15810RAAA02, 15810PNEG01..
Check Stock

Bennett V351HPU1 Hydraulic Power Unit - 12 Volt

  • Compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs.
  • Employs two solenoid valves to direct the flow of fluid to the actuators.
  • Solenoid valves lock tightly to secure the tabs in place.
  • Lexan cover protects electrohydraulic unit from occasional wash down and translucent reservoir allows fluid check at a glance.
Check Stock

Von Duprin 050240 6000 Series Solenoid Kit, 24 VDC (FS and FSE)

  • 【Dimension】- 20 x 26 x 39mm/0.78" x 1.02" x 1.53"(L*W*H).
  • 【Good design】- Pull Type, linear motion, frame type, plunger spring return, Low friction to ensure high efficiency and prolong life, 12V DC solenoid electromagnet..
  • 【Advantages】- Solenoid electromagnet has simple structure, small volume, high adsorption force.copper coil inside, has good temperature stability and insulation, high electrical conductivity..
  • 【Application】- DC 12V solenoid electromagnet widely used in vending machines, transport equipment, office facility household appliance, mechanical, etc game machine,Sorting machine,auto door lock,etc..
  • 【Noted】-As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time, best operate time is in 30 seconds..
Check Stock

uxcell DC 12V 2A 5mm Mini Electromagnetic Solenoid Lock Pull Type for Electirc Door Lock

  • Package Content : 1 x Electromagnet Solenoid Lock.
  • Easy to Install - It's with simple structure,and it can save the energy and the time during the installation for you..
  • With Low Use Cost - This electric lock use instantaneous power, can save power for you. So it can save money for you..
  • Small Size and Light Weight - It just takes up a small space which is perfect lock to be used for the small box or small cabinets..
Check Stock

Industrial Misting System - Patio Misting System - 250 PSI Misting Pump, Stainless Steel Tubing - For Residential. Commercial, Outdoor Restaurant and Industrial Misting Application (20 Nozzle System)

  • Base 20 Nozzle Stainless Steel Mist Kit Includes: 250 psi mid pressure pump with built-in solenoid and filtration 38ft Stainless Steel tubing for push lock (Pre-cut 2ft sections) 22ft UV coated Flexible 1/4" feed line 20- Nickel Plated Push Lock Misting Tees 1- End plug 2- Nozzle plugs 20- Nickel plated brass/stainless steel Nozzles (0.012") Stainless Steel Mounting Clamps and all necessary fittings required for easy D-I-Y installation.
  • Misting Pump Features : Stainless Steel Mist Line Whisper quiet operation Built in Solenoid Valve Built in Filtration Outdoor Enclosure Wall Mountable Steel Enclosure Max Pump Pressure 250 Psi 110v AC Supports up to 30 nozzles Cleanable Brass-Stainless Steel ultrafine misting nozzles Reusable high pressure push lock fittings Stainless Steel Clamps.
  • Applications Include : Residential Patio Misting Greenhouse Humidification Commercial Outdoor Cooling Outdoor Restaurant Misting Industrial Misting.
  • Do it yourself misting system, easy to install, with Push to Connect Nickel plated fittings, rated for 1800 PSI..
Check Stock

Patio Misting Kit - 250 PSI Patio misting System - Made in USA Pump - Up to 40 Nozzles Misting System - for Residential Misting System - Stainless Steel Misting Nozzles (10 Nozzle System)

  • {SYSTEM COMPONENTS} Base 10 Nozzle Mist Kit Includes: 1- 250 psi mid pressure pump with built-in solenoid and filtration.
  • 10- cleanable brass/stainless steel Nozzles (0.012").
  • Mounting Clamps and all necessary fittings required for easy D-I-Y installation.
  • {MADE IN USA PUMP} Whisper quiet operation Built in Solenoid Valve.
  • Outdoor Enclosure Wall Mountable Enclosure Max Pump Pressure 250 Psi 110v AC (Available in 12vdc and 220v on request) Supports up to 30 nozzles Cleanable Brass-Stainless Steel ultrafine misting nozzles Reusable push lock fittings.
  • {APPLICATIONS) Residential Misting, Industrial Cooling, Warehouse Misting, Outdoor Restaurant.
  • {FITTINGS FEATURES} Fittings are Brass /Nickel Plated Fittings - to Make your Misting System more durable.
  • {SUPPORT} 24/7 Support from mistcooling Texas. MC12080-MC12092.
Check Stock

Fielect DC 12V 15N Push Pull Type Tubular Solenoid Electromagnet, Linear Motion, MQ8-Z15B-12V

  • 【Dimension】- 30x 30x 50mm/1.18" x 1.18" x 1.96"(L*W*H).
  • 【Good design】- Push pull Type, linear motion, frame type, plunger spring return, DC solenoid electromagnet,easy to install..
  • 【Advantages】- This solenoid has simple structure, small volume, high adsorption force.copper coil inside, has good temperature stability and insulation, high electrical conductivity, simple control, energy saving and reliable, support DC voltage..
  • 【Application】- Solenoid electromagnet widely used in vending machines, transport equipment, office facility household appliance, mechanical, etc game machine,Sorting machine,auto door lock,etc..
  • 【Noted】-As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time,best operate time is in 25 seconds. The picture label data is inaccurate, the actual suction is subject to the title.
Check Stock

Ximimark 2Pcs JF-0530B DC12V 300mA 5N/10mm Push Pull Type DC Solenoid Electromagnet Magnete

  • 【Dimension】- 22 x 25 x 26mm/0.86" x 0.98" x 1.02"(L*W*H).
  • 【Good design】- Push pull Type, linear motion, frame type, plunger spring return, DC solenoid electromagnet,easy to install..
  • 【Advantages】- This solenoid has simple structure, small volume, high adsorption force.copper coil inside, has good temperature stability and insulation, high electrical conductivity, simple control, energy saving and reliable, support DC voltage..
  • 【Application】- Solenoid electromagnet widely used in vending machines, transport equipment, office facility household appliance, mechanical, etc game machine,Sorting machine,auto door lock,etc..
  • 【Noted】-As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time,best operate time is in 8 seconds. The picture label data is inaccurate, the actual suction is subject to the title.
Check Stock

12V Winch Solenoid Relay Contactor & Winch Rocker Thumb Switch Combo with Handlebar Control Kit Compatible with ATV UTV 1500lb-5000lb Polaris 800 1000

  • COMPATIBLE WITH - All winch solenoid 12v: 4x4 vehicles, ATV's, UTV's, SUV's, Jeep's, and most brands of recovery winches | Others like 12 Volt Trailer, hydraulic pump, lift jack etc..
  • OEM REFERENCE - 63070, 62135, 74900, 2875714, 70715 | Voltage: 12V, Power: 250A | Replacement Contactor for Polaris, KFI, WARN, RAMSEY, HONDA, SUPERWINCH, MILE MARKER, MASTER LOCK, CYCLE COUNTRY, CHAMPION, SMITTYBILT etc. Models, work with most brands of ATV/UTV warn winch solenoid | Please see the detailed fitment below..
  • UPDATED VERSION ACCESSORIES - Easy installation, The atv winch switch kit fixed parts of the new version of the product have been assembled, no need for the buyer to assemble it again, just install the winch switch rocker atv according to the instructions..
  • QUALITY ASSURANCE - Made of solid and weather resistant steel and powder coated black surface for great durability, exceeding original OE standard | 100% test before shipping. Direct Replacement for 12V 250 AMP ATV Winch Solenoid Relay Contactor and Switch | Comes with detailed instructions for easy installation. Great choice to replace the broken....
Check Stock

Garage-Pro Automatic Transmission Solenoid Compatible with 1990-2002 Honda Accord, 1995-1998 Odyssey & 1992-2001 Prelude

  • Garage-Pro Aftermarket Replacement Automatic Transmission Solenoid Compatible with 1990-2002 Honda Accord, 1995-1998 Odyssey & 1992-2001 Prelude.
  • Garage-Pro JCWREPH320708GP Features: Quantity: Sold Individually, Transmission Torque Converter Dual Lock-Up Switch.
  • 4 Speed Automatic, 2-Prong Blade Male Terminal.
  • Interchange Part Number: TCS80, 28300PX4003.
  • A high quality, Direct Fit OE Replacement Automatic Transmission Solenoid with FREE 1-year UNLIMITED mileage warranty coverage on Garage-Pro items..
Check Stock

Bitray DC 12V Magnetic Solenoid 5N Push Pull Open Frame Solenoid Electromagnet, Actuator Linear Motion 6mm Stroke Push Pull Type JF-0730B

  • Package Content : 1 x Electromagnet Solenoid Lock.
  • Easy to Install - It's with simple structure,and it can save the energy and the time during the installation for you..
  • With Low Use Cost - This electric lock use instantaneous power, can save power for you. So it can save money for you..
  • Small Size and Light Weight - It just takes up a small space which is perfect lock to be used for the small box or small cabinets, such as deposit box, cabinets, safes etc..
Check Stock

Alarm Lock DL2800 US26D Trilogy Digital Lock Cylindrical 26D, Satin Chrome

  • In an hour, add dependable wireless access control, one door at a time-easily retrofit standard knobsets.
  • Support 100 to 2000 pin codes (3-5 or 6 digits).
  • some with built-in hid prox readers for use with access id cards/fobs.
  • Multi-level user codes & one-time service codes. Free passage, group- or total lock-out modes, too.
  • Pc programmable models also feature printable audit trail, auto-lock/unlock scheduling saving guard/manpower costs.
  • Non-handed cylindrical models and programmable relay functions with curved regal handle option.Solenoid Duty: Intermittent duty.
Check Stock

Acouto 5R110W Car Automatic Transmission Solenoid Valve for Ford 2003-2015 7pcs Replacement Parts

  • Reference OEM---- Replacing OE number: 5R110W. According to the original factory specifications, which is an ideal OEM replacement with the same form, fit and function as the OEM original part.
  • Fitment---- Automatic Transmission Solenoid Valve is suitable for Ford 2003-2015 with the 5R110W Model Automatic Transmission. Please double check the part number of your item, matching information is for reference only.
  • High Quality Material---- Transmission Control Solenoid is made of high-quality aluminum and ABS material, which is wear-resistant and durable, not easy to break and has long service life. The manufacture of the transmission solenoid meets the strict quality requirements.
  • Professional Manufacturing---- Automatic Transmission Solenoid adopts professional manufacturing process, with stable performance, high precision and good reliability. Timely replacement of old or damaged 5R110W solenoid for better performance.
  • Good Replacement---- The installation is simple and does not require complicated operations, save time and effort. Ideal and direct replacement for old or damaged automatic transmission solenoid, dependable to use.
Check Stock