Mueller Industries 109-814 Float Valves, 0.75 Inch
- Dual inlet thread for connecting pipe and locknut.
- Machined flange for support against tank wall.
- Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves.
Check StockToolwiz Spanner Wrench, Pipe Wrench C Hook Wrench Coilover Wrench with Long Rubber Non-Slip Handle Compatible for Floor Heating Pipes, Cars Walnut, Suspension Systems, and Shock Adjustments - Red
- ...repairing, mechanical maintenance, and Pipe Fittings with an outer diameter of 1 1/4 inches.
- Applicability: C Hook Wrench is also suitable for suspension systems and Coilovers Shocks adjustments. It can be used as coilover wrench to adjust the coil shocks, lock nuts, pipe fittings, and sleeves ...
- Upgrade Design: The locknut wrench has an increased handle length of 16 cm, and provides more leverage than traditional shorter locknut wrenches, making it easier to tighten or loosen the lock nuts from sleeves. Perfect DIY plumbers wrench home tool set.
- Reliable Quality: The spanner wrench is an excellent hand tool set, made of ultra-high-strength carbon steel, making it strong and durable with excellent corrosion resistance ensuring long-term use. C wrench non-slip rubber handle supports a tight grip, improves performance, safety, and comfort.
- Perfect Gift Idea: An wrench spanner is a perfect home tool set and a practical present for your family, relatives, and friends tool set for car repairing DIY works.
- You Will Get: 1pc Coilover Wrench Carbon Steel Spanner Wrench Tool with 16cm Long Non-Slip Handle universal fit for 1 1/4 inch Lock Nuts Removal & Tighten.
Check StockOTC 1909 3-1/4" 8-Point Octagon Locknut Wrench
- 3-1/4 inch 8-point octagon locknut wrench.
- High strength steel resists rounding out.
- For use with 3/4 inch square-drive manual tools only.
- Measure from flat to flat to determine size of locknut.
Check StockLabewin Freewheel Remover for Shimano, Sun Race, DNP & Sachs(2Pcs)
- Fits for Shimano, Sachs Aris, and Sun Race freewheels.
- Professional and practical bike bicycle freewheel remover tool.
- Material: High quality heat treated to prevent bending and flexing.
- Thin wall construction allows use without removal of cones and locknut.
Check StockSuperior Tool 03825 Basin Buddy
- Unique slots grab locknut wings without breaking them off.
- Universal tool fits metal lock nuts, coupling nuts, PVC locknuts, most metal and plastic toilet supply nuts.
- Cutaway design fits around existing supply lines to remove coupling nut.
- Cutaway fits around the faucet shank (1/2 in) to remove metal and plastic nuts.
- Use with 1/4 in or 3/8 in ratchet drive, adapter included.
Check StockNOVINO 14-1/2Dia X 19Pitch Boat Outboard Propeller for Mercruiser Alpha One Prop/Mercury Engine 135 150 175 200 220 225 250 300HP,3-Blade Aluminum 14.5dia x 19 Pitch Propeller,Replace OEM#48-832830A45
- ... pitch Mercury/Mercruiser propeller,lower fuel consumption and great speed acceleration or rmps,,reduce the wear and tear on engine.
- Easy Install: The propeller with hub kit Includes Flo-Torque hub kit (hub, splined hub, thrust washer, prop nut and keeper),Just remove prop locknut&locknut retainer& forward thrust washer.Then Install forward thrust washer---Insert drive sleeve into prop---Slide prop on prop shaft---Insert drive sleeve adapter--Slide locknut retainer---Install prop locknut---Insert sth to prevent spinning--Tighten prop locknut.
- Fitment:perfect propeller replacement for 14.5x19pitch Mercury Engines 135 150 175 200 220 225 250 300HP&Mercruiser Alpha One Bravo One,detail information pls see below.
Check StockKlein Tools D333-8 Conduit Locknut and Reaming Pliers
- Pliers tighten 1/2-Inch (13 mm) and 3/4-Inch (19 mm) EMT or 1/2-Inch (13 mm) rigid locknuts.
- Reams and smoothes both inside and outside of conduit.
- Knurled jaws at nose tip pull wire or fish tape and machined nose fits snugly into locknut wings.
- Forged in the USA with custom, US-made tool steel for maximum durability.
Check StockPoweka 20mm 24mm Clutch Removal Tool Lock Nut Remover for Motorcycle,4-Pin Spanner Socket Wrench for ATV Dirt Bike
- Fit for : CRF50, XR200 1980-1984, XR200R 1981-1994, XR250L 1991-1994, XR250R 1986-1994, CL, CT, S, L, XL, SL models, Z50, XR50, ATC70, ATC90, C70,....
- Replace special tool: # 07716-0020100, 07VMA-MBB0100-101.
- Removes Locknut: 90231-028-000, 90231-200-010.
- SIZE: 24mm inside diameter on one side( 30mm OD).
- The clutch lock nut spanner is made of solid steel material, sturdy construction, durable in using.
- 4-pin socket spanner tool ,this is no-original aftermarket parts..
Check StockSigma Electric ProConnex C-560 Snap Lock AC/MC Connector 3/8-Inch, 25-Pack
- Terminates AC or MC to a 1/2" knockout without a locknut.
- For aluminum or steel 14/2 - 10/3 AC or MC.
- No locknut assembly for faster installation.
Check Stock2 Pieces Bike Cassette Lockring Tool Mountain Bike Cassette Removal Tool Bicycle Freewheel Remover Repair Lockring Tool for Bikes Black
- Quality material: the bike cassette lockring tool is made of quality carbon steel material, which adopts quenching process to make it sturdy and reliable that can be applied for a long time.
- Warm tip: it is recommended that you measure the size of the parts to be replaced before use, to avoid unsuitable product size for you to bring a bad shopping experience.
- Suitable size: the mountain bike cassette removal tool is suitable for 12 teeth type tool with diameter of 23.4mm, lightweight and portable to carry and store, taking up less spacec.
- Convenient to use: these bike freewheel remover tools are easy and convenient for people to use, it allows you to use without removal of cones and locknut, and it can be applied to tighten on screw-on freewheels.
- Basic and important part: being the part of freewheel and bottom bracket removal tools, the cassette lockring remover is basic and significant for you, helping you repair the bike quickly and effectively.
- Scope of application: the bike freewheel remover repair lockring tool is suitable for 12 teeth type freewheels cassette lockrings of most brands, and also fit for other 5-10 speed freewheels.
Check StockSuperior Tool 03825 Basin Buddy Faucet Nut Wrench-Wrench to grab metal pvc plastic and coupling nuts
- Unique slots grab locknut wings without breaking them off.
- Universal tool fits most metal lock nuts, most coupling nuts, most PVC locknuts and most metal and plastic toilet supply nuts.
- Cutaway design fits around existing supply lines toremove coupling nut.
- Once coupling nut is removed, cutaway fits aroundthe faucet shank (½-Inch) to remove metal and plastic nuts.
- Use with ¼ or 3/8-Inches ratchet drive, adapter included.
Check StockValterra RF850 1/4\ MPT x 3/8\ Barb Adapter
- Right Angle Nylon Cable Glands NPT Thread - These Right Angle Cable Glands are corrosion resistant..
- Seal & clamp system allows the cord connector to tighten in a circular sequence on the sealing ring to give outstanding strain relief without twisting or damaging the cable.
- Simply push the cable through the liquid tight Nylon strain relief & tighten locknut for quick installation.
- Threads into your panel for clearance, locknut included.
Check StockMorris 21816 Liquid Tight Connector Straight Non-Metallic 1-1/4 Thread Size 1-Pack
- Non-Metallic Liquid Tight Wire Connectors Straight With Steel Locknut - Our Liquid Tight Straight Connectors are weather and corrosion-proof..
- For use with Non-Metallica Liquid Tight conduit.
- Type B - Nylon construction with Zinc Die Cast Locknut - resists saltwater, gasoline, alcohol, oil and grease.
Check Stock