Best Long Reach End Mills

RedLine Tools - 3/32 (.0938) Single End Corner Radius Carbide End Mill, Amorphous Diamond Coated Coated, 3 Flute .1390 LOC .0150 Radius, Round Shank Type, 2.5000 OAL - RET7934

• 3 flute design for smoother/quieter milling operations High Performance ideal for pocketing steel, titanium and exotic alloys Ideal for long reach peripheral milling Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.

HHIP 3900-1005 5-Piece R8 End Mill Holder Set, 3/16-3/4'

• 5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20.
• Hardened and ground For Bridgeport type milling machines.
• Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8").
• 5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20.
• For double and single end mills (single end mils only for sizes over 5/8").

LittleMachineShop.com 4 Flute Ball End Mill Set, High Speed Steel, 6 Piece (2903)

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

• APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
• Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
• Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
• Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
• These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.

LittleMachineShop.com #3 Morse Taper End Mill Holder Set, 5 Piece (1636)

• Set of five 3 Morse taper end mill holders.
• Compatible with Mills with 3 Morse Taper Spindle.

LittleMachineShop.com R8 End Mill Holder Set, 5 Piece (1258)

• Set of five R8 end mill holders from 3/16" to 3/4".

Kodiak Cutting Tools L3-OFFT-21LF USA Made Micrograin Carbide Ball Nose End Mill Set, 4 Flute, 1/8\ to 1/2\ (Pack of 6)

• Contains Kodiak Cutting Tools brand premium quality USA made ball nose solid carbide end mills.
• 4 flute ball nose end mills are center cutting and made from premium sub-micrograin carbide.
• Stub length end mills for extra rigidity.
• Fitted wood block stand included and each size comes in a marked plastic tube.
• Contains 1pc of each diameter: 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2.

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter

• Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
• Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
• Four flutes produce a better finish than fewer flutes.
• Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
• Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

• Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
• Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
• Four flutes produce a better finish than fewer flutes.
• Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
• Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

YG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

• Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
• Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
• Four flutes produce a better finish than fewer flutes.
• Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
• Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

HHIP 1/2 INCH R8 Shell END Mill Holder (3900-1711)

• Diameter for Bore in Shell End Mill 1/2".
• Diameter range of standard end mills is 1-1/4 to 1-1/2"..

HHIP 3600-0056 End Mill Grinding Fixture (Angle) 5C

• Solid negative ball stops with 15 degrees spacing fast & easy set-ups..
• Can be used for grinding 2-3-4-6-8 and 12 flute end mills.
• This fixture takes 5C round collets for grinding end mill 1/16" ~ 1-1/8" .Clearance & relief angels are built into the base.
• Shell mills can easily be held with Straight Shank arbors.
• Clearance & relief angels are built into the base.

SpeTool CNC Router Bits Carving 8 Pcs Set for Wood Detail Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

• The Carving bits kits of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
• For CNC,Engraving machine.Carving Wood, plywood, MDF, plastics, acrylic, stainless steel, titanium alloy etc.
• Long service life, Decreasing the times of changing cutters,Saving production time.
• Include 3*carbide end mills ( 2 pc v-groove end mill, 1pcs tapered end mill ), 4*Spiral End Mill (3 pc up cut, 1 pc down cut), 1*ball end mill.
• The Carbide End Mill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.