Categories

Best Long Weld Neck Flange

3M 31801 Green Corps 1/2" x 18" 36 Grit Abrasive File Belt

  • Sanding belt for spot weld and hem flange removal.
  • Aluminum oxide minerals deliver a fast cut rate.
  • Abrasive belt made for increased durability and long-lasting service.
Check Stock

Remflex 2032 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-1/4 inch width x 1-5/8 inch height Oval Port.
  • Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
  • additional sealing material is provided around the weld bead to provide a better seal.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

RetroRubber OEM Grade Butyl Headlight Sealant, Gray

  • ★Butyl Sealant Main Application: Butyl rubber tape is suitable for the shock-absorbing paste of windshield, door waterproof film,decorative parts,car lamp,bus body and frame,as well as the sealing of body seam and flange plate.
  • ★Excellent Sealing: Our Butyl rubber sealant features excellent sealing adhesion,butyl tape can be sticky to any type of metal, concrete,glass,plastics and porous surfaces,no worries for falling off. Easy installation and removal.
  • ★Easy To Use: Simply release the butyl sealant from paper and press it sufficiently around the pinch weld.And after removing headlamp cover, the weld areas should be dry,clean,free from dust,oil and grease.Butyl rope prevent leakage,corrosion,deformation,vibration, weather and aging. Non-toxic, tasteless, pollution-free, easy to use.
  • ★Black Butyl Tape: Rubber Sealant is a non-drying,non-hardening synthetic rubber based butyl rubber sealant. It will remain permanently sealing and waterproofing,high viscosity,elasticity and tightness.
  • ★Butyl Windshield Sealant Size: Butyl sealant Diameter: 9mm, Length: about 4 meters. It is long enough for re-sealing about 2 or 4 headlight assemblies, easy to cut to fit for your need.
Check Stock

Eastwood Perfect Panel Prep Tool 18 20 Gauge Sheet Metal TIG MIG Butt Welds Creates Clean Holes

  • Exclusive, Patent Pending, Design Provides A Perfectly Beveled 45° Weld-Prepped Edge In 20 Or 18 Gauge Sheet Metal.
  • Proper Weld-Prepped Edges Allow Strong, Flush, Crack-Free Welds In Sheet Metal.
  • Each Strike Forms A Perfect 0.062” X 45° Beveled Flange.
  • Achieve Solid, Full-Penetration Mig Or Tig Butt Welds.
  • Full Material Thickness After The Repair.
Check Stock

Eastwood Pneumatic Perfect Panel Prep Tool 18 20 Gauge Sheet Metal TIG MIG Butt Welds Creates Clean Holes

  • Exclusive Patent Pending Design, Which Easily Provides A Perfectly Beveled 45° Weld-Prepped Edge In 20 Or 18 Gauge Sheet Metal.
  • Proper Weld-Prepped Edges Allow Strong, Flush, Crack-Free Welds In Sheet Metal.
  • The Convenient Hole Punch Feature Provides Clean, Burr-Free 0.19” Holes.
  • Each Strike Forms A Perfect 0.062” X 45° Beveled Flange.
  • Achieve Solid, Full-Penetration MIG Or TIG Butt Welds.
Check Stock

Qiilu 2in Weld On Filler Cap Aluminum Alloy Weld On Filler Neck and Cap 2' Weld On Fuel Filler Neck with Cap Fuel Tank Parts Car Refitting(Black)

  • 2" Weld On Filler Cap --- This fuel filler neck and cap is suitable for welding on 2 inch inner diameter pipe interface. The weld on fuel tank filler neck and cap is easy to install, no need complicated tools, convenient and practical for using.
  • Superior Quality Aluminum Alloy --- The weld on fuel filler neck with cap is made of high‑quality aluminum alloy material, firm, anti‑rust, and durable in use. 100% brand new, please be assured of your purchase.
  • Professional Manufacturing --- The aluminum weld on filler cap has excellent mechanical stability and corrosion resistance for high reliability. Precision‑machined to exact tolerances for trouble‑free performance.
  • Size --- The cap diameter is about 58mm / 2.3in, cap height is about 15.5mm / 0.6in, overall height is about 81mm / 3.2in, bore is about 47mm/1.85in, neck outer diameter is 2in, neck thread and cap thread are M52x2.5.
  • Quality Assurance --- As a professional seller, we provide high quality products and considerate services. Every fuel filler neck must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.
Check Stock

Oatey 43551 Replacement Ring, for Use with 4 in Closet Flanges, 3-Inch or 4-Inch, Brass

  • 3 countersunk holes and 3 closet bolt slots for secure attachment to the floor.
  • 3-Inch Spigot Closet Flange fits inside the hub end of 3-Inch Schedule 40 DWV fitting.
  • 4-Inch Spigot Closet Flange fits inside the hub end of 4-Inch Schedule 40 DWV fitting.
  • Solvent weld into fitting-short throat length is perfect for use in tight spaces and where the fitting is close to the sub-floor.
  • Four mounting slots for proper fit and alignment of closet bolts to the toilet.
Check Stock

Yunpo Butyl Sealant Tape 4M/13Ft Waterproof Butyl Rubber Sealant for Car Headlamps Window Door Windshield Butyl Tape Black

  • ★Butyl Sealant Main Application: Butyl rubber tape is suitable for the shock-absorbing paste of windshield, door waterproof film,decorative parts,car lamp,bus body and frame,as well as the sealing of body seam and flange plate.
  • ★Excellent Sealing：Our Butyl rubber sealant features excellent sealing adhesion,butyl tape can be sticky to any type of metal, concrete,glass,plastics and porous surfaces,no worries for falling off.Easy installation and removal.
  • ★Easy To Use: Simply release the butyl sealant from paper and press it sufficiently around the pinch weld.And after removing headlamp cover, the weld areas should be dry,clean,free from dust,oil and grease.Butyl rope prevent leakage,corrosion,deformation,vibration, weather and aging.Non-toxic,tasteless,pollution-free,easy to use.
  • ★Black Butyl Tape: Rubber Sealant is a non-drying,non-hardening synthetic rubber based butyl rubber sealant. It will remain permanently sealing and waterproofing,high viscosity,elasticity and tightness.
  • ★Butyl Windshield Sealant Size: Butyl sealant Diameter: 7-10 mm, Length: about 4 meters. It is long enough for re-sealing about 2 or 4 headlight assemblies,easy to cut to fit for your need.
Check Stock

Dynabrade 52633 5-Inch 127 mm Diameter Right Angle Depressed Center Wheel Grinder, 1.3 HP, 12000 RPM, Side Exhaust, 5/8-Inch - 11 Spindle Thread,Teal

  • 1.3 hp Depressed Center Wheel Grinder is ideal for fast weld and stock removal, heavy deburring, plus rust and scale removal.
  • Tool accepts optional 5-Inch (127 mm) diameter Type 27 Depressed Center Wheels with 7/8-Inch (22 mm) center hole.
  • Includes 25215 Wheel Guard, 25262 Backup Flange and 53696 Locking Flange.
  • Tool also accepts optional 5-Inch (127 mm) diameter Abrasive Flap Discs (flanging sold separately). Vibration Dampening Side Handle included.
Check Stock

Dynabrade 52632 4-1/2-Inch 114 mm Diameter Right Angle Depressed Center Wheel Grinder, 1.3 HP, 12000 RPM, Side Exhaust, 5/8-Inch 11 Spindle Thread

  • 1.3 hp Depressed Center Wheel Grinder is ideal for fast weld and stock removal, heavy deburring, plus rust and scale removal.
  • Tool accepts optional 4-1/2-Inch (114 mm) diameter Type 27 Depressed Center Wheels with 7/8-Inch (22 mm) center hole.
  • Includes 25212 Wheel Guard, 25262 Backup Flange and 53696 Locking Flange.
  • Tool also accepts optional 4-1/2-Inch (114 mm) diameter Abrasive Flap Discs (flanging sold separately). Vibration Dampening Side Handle included.
Check Stock

Dynabrade 52712 Diameter Right Angle Depressed Center Wheel Grinder, 2-Inch 51mm

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 2" Diameter, Right Angle, .4 hp, Rear Exhaust. 20,000 RPM.
  • Includes 90999 Depressed Center Wheel (24 grit), 2" diameter with 3/8" center hole, guard and wheel flange set also included.
Check Stock

Rotary Welding Positioner, 110V Light Duty Welder Turntable Table Mini 2.5' 3 Jaw Lathe Chuck 10KG (USA Stock)

  • ★【The Main Functions】Light Positioner is mainly used for welding of annular weld. The main function of the machine is to tilt, turn the workpiece, so that the weld in the horizontal, ship-shape, such as the best position to apply welding..
  • ★【High-quality DC Motor】High-quality DC motor, the worktable running smoothly, welding speed can be stepless regulation, large adjustment range, high adjustment precision..
  • ★【Multifunction】The device can be fixed on the working table or specific tooling for clamping workpiece with manual welding, can also be used with welding operation machine to achieve automatic welding, but also for cutting, grinding, assembly, testing and other processes..
  • ★【High Positioning Accuracy】Clamp and worktable Choose simple mechanical connection way, high positioning accuracy.
  • Especially suitable for under 10KG flange, steel pipe and other seam welding..
  • ★【Easy to Operate】Using foot switch control table rotation, easy to control rotation.
  • Light weight, easy to use, handling, easy to operate..
Check Stock

304 Stainless Steel Bench Pedestal - 16.25\ High

  • ROBINSON STEEL COMPANY IS PROUD TO BE THE MANUFACTURER OF THE ONLY FLANGED STYLE 304 GRADE STAINLESS STEEL PEDESTAL MADE IN THE USA.
  • 8.25" diameter x 11 gauge flange plates top and bottom.
  • Heavy Duty Steel Tube: 2" diameter x .12" wall (11 gauge).
  • Steel Tube is welded to top and bottom plate with a full 2" diameter weld 1/8" fillet.
  • Universal pedestal with three holes in top/bottom plate for bench and floor mounting, Stainless steel hardware is provided for mounting to bench tops, Floor anchor bolts are NOT provided..
Check Stock