Categories

Best Long life Consumables

PT-60 Torch Electrode Contact Tip Retaining Cap Drag Shield Cap Plasma Cutting Consumables 21pcs

  • 21pcs Plasma cutting consumables kits: 5pcs electrode + 10pcs nozzle / tip + 1pc retaining cap + 5pc shield cap.
  • The plasma arc cutting consumables kits fit PT-60 / PT60 / PT-40 plasma cutting torch ,fit LTP5500 Plasma Cutter Consumables.
  • WS OEMed Plasma Arc Cutting Torch Consumables, not originalPlasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
  • Plasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
Check Stock

Hypertherm 088079 Powermax30 XP Building America Edition Hand Plasma System with Case and 15-Feet Lead

  • Auto-voltage automatically adapts to 110 V – 240 V input power. Plug adapters included..
  • Comes with hard carry case, eye shields, gloves, shoulder strap, standard consumables and Fine Cut consumables..
  • Duramax LT torch design provides a sure, comfortable grip made from heat and impact resistant material..
  • Auto-voltage automaticvally adapts to 110 V – 240 V input power. Plug adapters included..
  • Comes with hard carry case, ehe shields, gloves, shoulder strap, standard consumables and FineCut consumables..
Check Stock

Lotos CP243 Extended Plasma Cutting Torch for RED Color LTP5000D with 3-Prong Switch Connector 24 ft

  • 24Ft long pilot arc plasma cutting torch plasma cutting torch for RED Color LTP5000D.
  • NOT Compatible with BROWN Color LTP5000D.
  • One set of consumables is installed (1 nozzle, 1 electrode, 1Cup).
  • The compatible consumables for this torch are Loots PCON 20, PCON40, PCON90..
  • Can only be used for LOTOS pilot arc plasma cutter LTP5000D.
Check Stock

WeldingStop 770496 770723 Electrode Tip for Hobart Plasma Cutter Airforce 250ci HP-25 and AirForce 500i HP-50 Torch

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770723 plasma cutter parts kit including 5pcs electrodes and 5pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 10pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

WeldingStop 770496 Electrode and Tip Kit for Hobart AirForce 250ci 500i HP-25 HP-50 Plasma Torch 4-Pack

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770496 plasma cutter parts kit including 2pcs electrodes and 2pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 4pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

YESWELDER Tig Welding Torch WP-17FV Gas-Valve Head Flexible Head Air-Cooled TIG Complete Torch with 12-ft Cable

  • Power/ GAS Cable Connection, 3/8"-24 RH with 105Z57 Adapter.
  • Air cooled design can make welding torch work for long term and extend its service life..
  • Please be must help to confirm whether the connection part can fit your welding machine. Thanks!.
Check Stock

Portable and Personal Air Purifier Necklace Wearable Negative Ionizer Generator Air Cleaner， Home Travel Ionizer for Adults and Kids

  • Health Guardian: The portable air purifier necklace around the neck, so you can enjoy refresh and clean air at any time, thereby improving sleep and....
  • Breathe Cleaner Air: The personal ionic air necklace purifier uses the latest negative ions technology which releases more than 120 million negative....
  • Portable and Easy to Use: The mini air ionizer necklace is simple and compact, easy to carry whether you are at home or traveling, you can breathe....
  • Ultra-long Use and Ultra-quiet: The rechargeable ionizer air necklace works 60 hours (80 million negative ions) of battery life on a single charge,....
  • Ideal Gifts: This personal portable necklace air freshener doesn't need to be replaced for life for consumables, the elegant and beautiful design....
Check Stock

Dyllica 9-8213 Plasma Start Cartridge 9-8277 for Thermal Dynamics CutMaster 52 Consumables SL60 SL100 Plasma Part Consumables 1pc

  • 【Dyllica Brand Plasma Start Cartridge】The plasma Start Cartridge 9-8277 is made by Dyllica Brand.
  • It can be used as plasma aftermarket parts which can install on DYThermal Dynamics SL60 SL100 plasma torch.
  • 【Plasma Consumables Type & Ref Number】Plasma Start Cartridge, item ref number is 9-8213 / 9-8277.
  • 【As SL60 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge can install on DYThermal Dynamics SL60 torch with Cutmaster 38 / 52 / 12 / 20 /25 plasma cutter machine.
  • 【As SL100 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal Dynamics SL100 torch with Cutmaster 102 / 152 / 40 plasma cutter machine.
  • 【As SL60QL Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal DynamicsSL60QL torch with Cutmaster 58 / 60i plasma cutter machine.
Check Stock

LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Brown & Technology LCS22 Plasma Cutter Consumables Sets for Brown Color LT5000D and Brown Color CT520D (Pack of 22)

  • ...35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost..
  • Product 1: ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTPDC2000D Plasma Cutter are "PCS22" or "PCS33". Please search "Lotos PCS22" or "Lotos PCS33". ★ It CANNOT compatible with Lotos PCON40 or PCON90 Consumables Sets or any other third part consumables set.
  • Product 1: ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website..
  • Product 2: Can only Compatible with BROWN Color Lotos LT5000D and BROWN Color Lotos CT520D.
Check Stock

LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, 1/2 Inch Clean Cut, Brown & PCS22 Plasma Cutter Consumables Sets for Brown Color LTP5000D and Brown Color LTPDC2000D (22)

  • ...without touching the tip to the metal. Better cutting quality and longer consumable life..
  • Product 1: ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • Product 1: ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTP5000D Plasma Cutter are "PCS22" or "PCS33". Please search "Lotos PCS22" or "Lotos PCS33".
  • ★ NOT compatible with Lotos PCON40 or PCON90 Consumables Sets or any other third part consumables set.
  • Product 1: ★ OUTPUT & PERFORMANCE: 10-50 A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost..
  • Product 2: Only Compatible with BROWN Color Lotos LTP5000D, LTPDC2000D..
  • Product 2: NOT Compatible with Red Color Lotos LTP5000D, LTPDC2000D..
  • Product 2: Includes: 10 Nozzles 10 Electrodes 1 Cup 1 Stand Off Guide.
  • Product 2: NOT Compatible with any other Brand and any other Model of plasma cutters.
Check Stock

Drag Shield Hand 60485 Retaining Cup 60389C fit Plasma Cutting IPT-60 PT-60 Torch 6-PKG

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 1pc Retaining Cup + 5pcs Drag Shield.
  • There are 6pcs plasma cutter IPT60 consumables in every package.
  • The plasma cutting current is about 30-60A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock

Lotos CL133 Plasma Cutting Torch 3 Prong Switch Connector for Red Color LT5000D, LT3500, LT3200 and BROWN Color LT3500 13 ft

  • Standard length 13Ft long plasma cutting torch.
  • LOTOS DESIGNED Torch is made specifically for RED Color Lotos plasma cutter LT5000D, LT3500, LT3200 and BROWN Color LT3500..
  • NOT Compatible with BROWN Color Lotos LT5000D..
  • Included consumables comes with one set of consumables (1 nozzle, 1 electrode, 1 ring, 1 cup) installed on torch head.
  • Machine attachment 3 prong end connector ready to be connected to your lotos plasma cutter.
Check Stock

WeldingStop PT-60 IPT-60 Retaining Cap 60389C Drag Shield 60485 Electrode Plasma Contact Cutting Consumables PKG/46

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 20pcs Electrodes + Tips and 1pc Retaining Cup + 5pcs Drag Shield.
  • There are 46pcs plasma cutter IPT60 consumables in every package.
  • The diameter of tips are 0.9mm or 0.035 inches, plasma cutting current is about 30-40A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock