Categories

Best Lora Leigh Overcome

SparkFun MicroMod LoRa Function Board - 1W 915M30S LoRa Module Frequency Range: 900 - 931MHz Transmit Power 28.5 - 30dBm (max) Modulation LoRa, FSK, GFSK, MSK, GMSK, OOK Antenna Impedance: 50Ω

  • The 1W LoRa MicroMod Function Board adds LoRa capabilities to your MicroMod project. It is intended to be used in conjunction with a MicroMod processor board and a MicroMod main board, which provides the electrical interface between a processor board and the function board(s)..
  • Utilizing the 915M30S LoRa module from EBYTE, which is a 1W (30dBm) transceiver based around the SX1276 from Semtech. There is a robust edge mount RP-SMA connector for large LoRa (915MHz) antennas.
  • with modification, a U.FL connector is also available. We've successfully tested a 12 miles line-of-sight transmission with this module (user results may vary)..
  • Board Features: M.2 MicroMod Edge Interface, Keyed Screw Slots, RP-SMA Antenna Connector, Configurable U.FL Antenna Connector. MicroMod Peripherals Used: 5V Power.
  • 1W 915M30S LoRa Module Features: Based on SX1276 chipset from Semtech.
  • modulation: LoRa, FSK, GFSK, MSK, GMSK, OOK.
  • Data Rate: FSK: 1.2 - 300kbps, LoRa: 0.018 - 37.5kbps.
  • Note: A MicroMod Processor, Main Board, and antenna are not included with this MicroMod LoRa Function Board. These parts will need to be purchased separately.
Check Stock

915MHz ESP32 LoRa 0.96 OLED Development Board V3 SX1262 Type-C + LoRa Antenna for Arduino LoraWan IOT Internet of Thing (Pack of 2), not Compatible with WiFi LoRa 32 V2

  • The esp32 lora 915mhz comes unassembled, soldering is required, not equipped with lithium battery..
  • When you use esp32 oled lora, you need to use 2pcs together. One is used for receiving and another for sending.
  • 0.96 oled is mounted on esp32 lora board via 4 screws, so it is removable but pls be careful to do it to avoid damage..
  • You will receive, 2pcs lora oled board 915mhz new version V3, and 2pcs 915mhz lora antenna..
  • If you got the V2, it should be the one returned by others ordered long time ago. Please confirm it with DIYmalls as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
Check Stock

HiLetgo SX1276 ESP32 LoRa Kit Bluetooth 4.2+WiFi+LoRa LoRaWAN Wireless Communication Development Board with 0.49\ OLED Display 64M Bits Flash Works with Arduino IDE

  • Microprocessor: ESP32 (dual-core 32-bit MCU + ULP core), with LoRa node chip SX1276/SX1278.
  • Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching).
  • Integrated WiFi, LoRa, Bluetooth three network connections, onboard Wi-Fi, Bluetooth dedicated 2.4GHz metal 3D antenna, reserved IPEX (U.FL) interface for LoRa use.
Check Stock

Panda Hugs from Universe by Lora Zombie Studio - Colorful Panda Bear Canvas Wall Art for Kids Bedroom - Cute Watercolor Pictures for Animal Nursery Decor - Abstract Artwork Poster Prints - 16'x20'

  • WALLART THAT MAKES A STATEMENT: Say goodbye to your simple, boring room and create a colorful and inspiring aesthetic with Lora Zombie home décor animal art prints. Lora Zombie makes art to inspire creativity and meaning..
  • QUALITY YOU CAN SEE: 190 GSM 100% Cotton Rag Natural Fine Art Paper for premium look and feel. Every painting printed using Epson UltraChrome Pro Inks for superior color & clarity..
  • VARIETY OF DESIGNS: Lora Zombie offers many fantasy and motivational art prints that use colorful graffiti street style art that boys and girls of all ages love. Inspire bravery and courage! Perfect for any space in your house: bedroom, bathroom, dining room, kitchen, dorm room..
  • AVAILABLE IN 2 SIZES: Designed and custom trimmed to fit standard size frames. The small size is 8.5 x 11 inches and the Large is 16 x 20 inches. This modern picture makes for cool pop decor for your walls ..
  • ART FOR EVERYONE: Lora Zombie wants everyone, even kids, to be able to access artwork and feel a part of it. These art prints are perfect for children, college students & adults. 30 Day Money Back Guarantee if you're not 100% satisfied with your purchase..
Check Stock

I Need You To Know: The ABC's of a Young King's Greatness

  • 56 Pages - 10/01/2019 (Publication Date) - Lora McClain Muhammad (Publisher).
Check Stock

SparkFun Pro RF - LoRa, 915MHz (SAMD21) - Wireless Board Easy-to-use IoT Qwiic Enabled microcontroller 915MHz ISM Band Reinforced Micro-B USB Connector Included u.FL Antenna Connector

  • A LoRa-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and easy-to-use IoT board. Compatible with Arduino..
  • A short (3 inch) wire antenna is sufficient for "short" distances (up to 1 mile line-of-sight), but we've also included a u.FL antenna connector for potentially longer distances..
  • SAMD21G18A, Cortex M0+, 256KB Flash Memory, 32MHz External Oscillator, 4 Digital and 5 Analog IO Pins with exclusive GND pins.
  • Hope RFM95W LoRa modem, Point to Point Radio capabilities, LoRa Enabled, Frequency range: 915 MHz, Spread factor: 6-12, Range up to 1 mile line of sight, U.FL Antenna.
  • LiPo Battery Charger, 500mA Charge Rate. Qwiic Enabled. Power LED disconnect jumper for low power applications. PTH pins for software debug (SWD).
Check Stock

MakerFocus ESP32 LoRa 32 (V2), ESP32 Development Board W I F I Bluet ooth LoRa Dual Core 240MHz CP2102 with 0.96inch OLED Display Included 868/915MHZ Antenna for Smart Cities, Smart Farms, Smart Home

  • ★ Documents: Please get the link from the product description below.
  • ★Note: This item comes unassembled, soldering of headers is required..
  • ★Upgrade ESP32 lora development board with 868/915MHz antenna, it supports Sniffer, Station, softAP and W i- F i Direct modes. If you want to use the Lora feature, you need two esp32 lora modules. One is used to send messages and one is used to receive messages.
  • ★High reliability, transmission distance (measured open area communication distance 2.8Km).
  • Receiver sensitivity up to - 139 dBm, UDP continues to throughput by 135 Mbps.
  • ★Board friendly, space of pins is 2.54*23mm, fit to breadboard. 0.96-inch blue esp32 oled display, lithium battery charging circuit and interface, CP2102 USB to serial chip.
Check Stock

Mikrotik wAP LR9 kit RBwAPR-2nD&R11e-LR9 Wireless Dual-Chain 2.4 GHz LoRa Access Point with 1x Ethernet Port

  • MikroTik RouterBOARD RBwAPR-2nD&R11e-LR9 R11e-LoRa9 and wAP LoRa9 kit supports 902-928 MHz, 2.
Check Stock

LILYGO TTGO T-Beam V1.1 ESP32 915Mhz WiFi Bluetooth Module ESP32 GPS NEO-6M SMA 18650 Battery Holder with OLED…

  • Chipset: ESPRESSIF-ESP32 (Wi-Fi & Bluetooth compatible).
  • GPS Modules： NEO-6M, 3V-5V power supply Universal Destined module with ceramic antenna, signal super Save the configuration parameter data EEPROM....
  • Lora: Support Lora network，antenna connector is RG316.
  • OLED: It has a 0.96 inch screen and a high resolution of 128 * 64.
Check Stock

DIYmall LoRa32u4 II Lora Development Board Module 915MHZ LiPo SX1276 HPD13 with Antenna for Arduino

  • 3.3V regulator with 500mA peak current output.
  • Built in 100mA lipoly charger with charging status indicator LED, interface is 2.0mm male.
  • 915MHz GSM IPX IPEX 1.13 UF.L Antenna Built-in 2DBi, 8cm,Standing wave ratio / S.W.R.≤2.0,Impedance: 50Ω,Max Input power 50W.
  • What you will get is : 1 X LoRa32u4 II Lora module, 1 X IPEX 1.13 UF.L Antenna, 1 X JST-PH2.0MM-2P plug cable.
Check Stock

HiLetgo ESP32 LoRa SX1278 0.96 inch OLED Display Development Board WiFi Bluetooth Dual Core 240MHz CP2102 and 433/470MHz Antenna for Arduino Smart WiFi LoRa 32

  • Note: This item comes unassembled, soldering of headers is required. Lithium battery is not included..
  • WIFI LoRa 32 development board with 433/470MHz antenna, It supports Sniffer, Station, softAP and Wi-Fi Direct modes. This product is based on the WIFI Kit 32 added SX1278 chip, that is, LoRa remote modem, 433MHz frequency, about -139dBm high sensitivity, +20 dBm power output.
Check Stock

HiLetgo ESP32 LoRa SX1276 0.96 inch OLED Display Development Board WiFi Bluetooth Dual Core 240MHz CP2102 and 868/915MHz Antenna for Arduino Smart WiFi LoRa 32(Unsoldered)

  • Note: This item comes unassembled, soldering of headers is required. Lithium battery is not included..
  • WIFI LoRa 32 development board with 868/915MHz antenna, It supports Sniffer, Station, softAP and Wi-Fi Direct modes. This product is based on the WIFI Kit 32 added SX1276 chip, that is, LoRa remote modem, 868MHz frequency, about -139dBm high sensitivity, +20 dBm power output.
Check Stock

Nathan James Leigh Pendant Lighting, Black Hanging Ceiling Light with Oversized Glass Shade and Adjustable Cord, for Kitchen Island or Entryway, Matte Black/Clear

  • Leigh pendant light is an elegant addition to your room with its solid metal black structure and sleek geometric metal yoke with knurling details..
  • The ceiling hanging light is adjustable which makes it perfect for pairing in the kitchen, in an entryway, or above your bedside tables..
  • Leigh pendant light fixture is versatile and can be used with a dimmable bulb to control the ambiance of the room..
  • The oversized glass shade make Leigh pendant light timeless in any room and will stand out in your kitchen above your island or in your hallway to welcome your guests..
  • Suggested Bulb: Type G19 60W(sold separately).
Check Stock