Categories

Best Low Backlash Couplings

Tb Woods 5J12 Coupling

  • Item - Sleeve Coupling Flanges: Sleeve Coupling Flange.
Check Stock

Electronics Diagonal Cut-Carbide Metal Cut Edges

  • Low-friction double spring for gentle and even opening.
  • The polish offers effective rust protection- no circuit faults caused by peeling chrome from plated tools..
  • Hardness of the carbide cutting edges 80 – 83 HRC.
  • Constantly reliable cutting results due to the avoidance of cutter deformations.
Check Stock

B&M 80832 4' Super Duty Race Shifter Cable

  • 4 foot long super duty cable can be used on all B&M shifters (except Unimatic and Street Rod).
  • Less than .015" backlash per foot, which is up to 50% less backlash than competitive cables.
  • Prelubed for smooth operation, and rotary swaged for improved cable durability.
  • Red 'long lay' outer jacket is sized .375" O.D..
  • Threaded on one end, and an eyelet on the other.
Check Stock

Westinghouse Lighting 70272 7027200 12" Lamp Pipe Kit, 1 Pack, Yellow

  • 12, all thread lamp pipe Kit, zinc plated steel, includes two: 1/8Iron pipe x 12Threaded pipe, two 1/8Iron pipe couplings.
  • Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
Check Stock

Smart Vac SMP500 Central Vacuum System Power Unit

  • Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
  • 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
  • 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
  • 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check Stock

KastKing Rover Round Baitcasting Reel, Right Handed Fishing Reel,Rover50

  • LOW-PROFILE CASTING REEL - The 13 Fishing Origin TX features an extra-tough design that works perfectly in fresh or saltwater..
  • LIGHTWEIGHT COMPOSITE FRAME - Built with a zero corrosion low-torque composite frame and side plates to ensure durability in harsh conditions this reel is a reliable choice for coastal anglers..
  • ARROWHEAD LINE GUIDE SYSTEM - The Arrowhead line guide system, and corrosion resistant high spin bearings deliver your bait while multi-material drag system and Japanese Hamai Cut Gearing allow you to power fish to the boat..
  • 6-WAY CENTRIFUGAL BRAKING SYSTEM - A 6-way centrifugal braking system allows the line to feed off the spool easily and eliminates line backlash..
  • TRICK SHOP COMPATIBLE - 13 TrickShop compatibility means you can customize your favorite Origin reel with even more flair.
Check Stock

Central Vacuum Cleaner with Deluxe Accessory KIT-Set

  • Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
  • 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
  • 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
  • 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check Stock

Fil-Tech Magna-Glide Poly Classics Style L 135yd Prewound Bobbins 100ct White

  • No. 60 Filament Polyester . Fil-Tec Bobbin central's patented magnetic core creates consistent delivery through the entire bobbin..
  • No more interruptions for tension adjustments as your bobbin gets smaller..
  • Magnetic core prevents backlash or over-spin and eliminates the need for backlash springs..
  • Magna-Glide is the original high-yield magnetic-core bobbins..
Check Stock

13 FISHING Origin TX 7.3:1 Gear Ratio Left Hand Saltwater Baitcasting Fishing Reel

  • LOW-PROFILE CASTING REEL - The 13 Fishing Origin TX features an extra-tough design that works perfectly in fresh or saltwater..
  • LIGHTWEIGHT COMPOSITE FRAME - Built with a zero corrosion low-torque composite frame and side plates to ensure durability in harsh conditions this reel is a reliable choice for coastal anglers..
  • ARROWHEAD LINE GUIDE SYSTEM - The Arrowhead line guide system, and corrosion resistant high spin bearings deliver your bait while multi-material drag system and Japanese Hamai Cut Gearing allow you to power fish to the boat..
  • 6-WAY CENTRIFUGAL BRAKING SYSTEM - A 6-way centrifugal braking system allows the line to feed off the spool easily and eliminates line backlash..
  • TRICK SHOP COMPATIBLE - 13 TrickShop compatibility means you can customize your favorite Origin reel with even more flair.
Check Stock

13 FISHING Origin TX 7.3:1 Gear Ratio Right Hand Saltwater Baitcasting Fishing Reel

  • LOW-PROFILE CASTING REEL - The 13 Fishing Origin TX features an extra-tough design that works perfectly in fresh or saltwater..
  • LIGHTWEIGHT COMPOSITE FRAME - Built with a zero corrosion low-torque composite frame and side plates to ensure durability in harsh conditions this reel is a reliable choice for coastal anglers..
  • ARROWHEAD LINE GUIDE SYSTEM - The Arrowhead line guide system, and corrosion resistant high spin bearings deliver your bait while multi-material drag system and Japanese Hamai Cut Gearing allow you to power fish to the boat..
  • 6-WAY CENTRIFUGAL BRAKING SYSTEM - A 6-way centrifugal braking system allows the line to feed off the spool easily and eliminates line backlash..
  • TRICK SHOP COMPATIBLE - 13 TrickShop compatibility means you can customize your favorite Origin reel with even more flair.
Check Stock

[2pcs of Pack] 400mm 8mm T8 Stainless Steel Threaded Rod Lead Screw for 3D Printer Machine Z Axis

  • ★Diameter: 8mm, Screw thread: 2mm Pitch 8mm Lead (4-heads, turn the nut one circle, front the screw 8mm).
  • ★Function:The Screw nuts ensure safe and precise clearance adjustment , recessed screw holes, featuring non-protruding.
  • ★Features:The anti backlash nut retainer has high precision and zero repeatability or tilt repeatability.
  • ★Install:Easy and quick installation, Internal thread connection.
  • ★Application Scope: Suit for 3D printers Ender 3 anti backlash nut and CNC.
Check Stock

XZT 10000PSI Digital Hydraulic Pressure Test Coupling Kit,Repair Test Tools for USA Brand Excavator (10000PSI)

  • 【13 Couplings】This Excavator Pressure Tester Kit comes with 13 different couplings, perfect compatible with Caterpillar, Hitachi, Komutsu, Daewoo, Hyundai, Kato, Kawasaki..
  • 【High-grade Silicone Oil】Our Excavator Pressure Gauges have built-in high-grade silicone oil, which will not turn yellow, has better shock resistance and higher accuracy..
  • 【High-quality Gauges】The housing of our five gauges (150PSI/1500PSI/3500PSI/6000PSI/9000PSI) is stainless steel and Polycarbonate glass, so they are sturdy, durable, impact resistant, and clear display..
  • 【Complete Kit】Comes with 13 x Couplings, 14 x Tee Connectors, 5 x 61.5'' Test Houses, 5 x Pressure Gauges, and 1 x Sturdy PP Suitcase..
  • 【Warranty】We provide 3-year warranty and 24-hour friendly customer service. Pls feel free to contact us if you have any issue about our product..
Check Stock

Mecanum Wheel with Coupling 4PCS Omnidirectional Wheels 4WD Smart Robot Car Kit Accessories 65mm Robot Kit Drive Wheel for Arduino/Raspberry Pi DIY STEM Project

  • 003cp003e65mm engineering plastic mecanum wheels (2x left, 2x right) include 2 right wheels and 2 left wheels. Each wheel consists of 9 rollers and 003cb003ecan be driven independently.003c/b003e003c/p003e.
  • 003cp003eMecanum wheels can be moved 003cb003ein any direction without changing the direction003c/b003e of rotation of the wheels. Each of the four mecanum wheels contains a series of rollers whose axis of rotation makes a 45 ° angle to the plane of the wheel.003c/p003e.
  • 003cp003eThe mecanum wheels suitable for 003cb003eLego 003c/b003ecross shafts, can also be fitted with N20 motors by installing 3mm couplings, TT motors by installing TT motor couplings, GA25-370 by installing 4mm couplings, and 5mm couplings by installing with stepper motor.003c/p003e.
  • 003cp003eThis mecanum wheels used for 003cb003eRaspberry Pi 4/3B+/3003c/b003e,Micro:bit and 003cb003eArduino Project 003c/b003ecompatible with DC motor.003c/p003e.
  • 003cp003eThe mecanum wheel made of high hardness plastic,and 003cb003elow pulsating noise003c/b003e. Omnidirectional Wheels are not easy to damage. The mecanum wheels have a long service life and no deformation.003c/p003e.
Check Stock