Categories

Best Low Carbon Steel Cloth

HWTOP Landing Nets Fishing Nets High-Carbon Fishing Nets, Stainless Steel Net Rings are Thickened and Hardened for Fishing Release

  • Metal positioning: The main pole is made of high-carbon material, which is not easy to damage. Multi-section positioning, flexible telescopic, rotating and pulling out, convenient and practical, natural and more stable, suitable for various waters..
  • High-carbon shaft: The shaft is tightly built with reverse wire cross carbon cloth. The shaft has a thick wall and high hardness, high elasticity, and the shaft is light, hard and tough, and durable..
  • Stainless steel mesh ring: The mesh ring is made of stainless steel, solid stainless steel welded mesh ring, made of high-strength material, light weight, strong and durable. The racket braided cord is strong and wear-resistant. With an 8mm universal interface, it can fit most mesh heads on the market..
  • Strong load-bearing: The fishing rod is tightly rolled with reverse wire cross carbon cloth, with a load-bearing 80kg, super load-bearing, easy to deal with big fish..
  • The net pole is ultra-light: The length of the fishing net pole is 105cm when retracted, and the extended length can reach 2.61m. The weight is very light, only 410g, it is very convenient to carry and store, suitable for any fisherman..
Check Stock

Kalimba Thumb Piano 17 Keys Musical Instruments, Mbira Finger Piano Gifts with Tune Hammer and Study Instruction for Kids and Adults Beginners

  • ♫【HIGH QUALITY MATERIALS】This Kalimba thumb piano is made of high grade acrylic and 17 carbon steel keys. Acrylic is famous for its excellent transparency and weather resistance. What’s more, it is harmless even if it contacts with people for a long time. Carbon steel has a low toughness, high plasticity and abrasion resistance, which is great for playing..
  • ♫【Package List】Kalimba x 1, Tuning Hammer x 1, Play Guidance and Song Book x 1, Color Sticker (Red and Green) x 2, Silicone Finger Gloves x 2,Cloth Wiper x 1,Scale Letter Stickers x 1, Black Organize Bag x 1..
  • ♫【NICE SOUND & CURVED NOTES】Made from a clear acrylic material that is lightweight and easy to clean. Producing soothing low volume tones are easy to make when plucking the note tines with your fingers..
  • ♫【PERFECT GIFT IDEAL 】 No worry for choosing the gift, without hesitation to buy the thumb piano as the gift for music lovers, piano, guitar, and ukulele players. Take your kalimba and start your show..
  • ♫【Standard C Tune】:The corresponding tunes of the metal tines are D6-B5-G5-E5-C5-A4-F4-D4-C4(middle)-E4-G4-B4-D5- F5-A5-C6-E6(from left to right). Soft, clear, crisp and sweet tone to heal your blue mood and cheer you up at minutes..
Check Stock

8 inches Long Hand Forged Damascus Steel Blank Blade Skinning Knife with 3 Pin Hole & an Inserting Hole Space 4 inches Cutting Edge

  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Overall 8 inches Long hand forged full tang Damascus steel blank blade.
  • 4 inches long cutting edge. Up to standard skinning and Hunting Knife.
  • 4" long Scale space with 3 Pin and an inserting holes for extra strength of scale..
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

AULAKNIV Collect Customized Full Tang Fixed Blade D2 Steel Perfect Tactical Design 12.5" Bowie Knives Tactical,Hunting,Survival,Camping Tools W/Leather Sheath

  • Overall 11 inches Long hand forged full tang twist pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.75" long finger serrated Scale space with finger guard.
  • Approximately 5 mm Thick twist pattern Damascus steel Kukri point blade. Our Damascus steel is prepared by forging over 200 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

Wood Carving: A Carefully Graduated Educational Course

  • Material: Wood carving knives are made of quality carbon steel and electrolytic coating, strong and sturdy,which will ensure longevity, suit for variety of projects. Good for the beginners..
  • 20PCS Set : Wood Carving kit includes 12pcs carbon steel carving knives, 1pcs whetstone, 1pcs storage case,1pcs carpenter pencil, 1pcs wooden ruler, 2pcs sandpaper, 2pcs wipe cloth..
  • Wonderful Experience: Wood carving tools set includes 12 different shape size gouges, small, safe and stays sharp, will give you a wonderful carving experience.(Tips: Be careful to operate during using, to avoid the sharp gouges hurting you)..
  • Ergonomically Wooden Handles: These carbon steel carving knives with 4.3" ergonomically designed wooden handles allow you to handle long projects comfortably, powerful grip..
  • Wide Use: Suitable for woodworking, carving, sculpting, modeling, cutting, graining and scraping, also for soapstone projects, crafts, or clay sculpture..
Check Stock

Aootf Carbon Fiber License Plate Frame- Handcrafted of 100% Real Carbon Fiber Cloth Wrap Aluminum Frames | Stainless Steel License Plate Screws with CF Screw Caps | Gloss Black 2 Holes | Qty 1 Frame

  • Carbon Plate Frame: 100% true carbon fiber cloth, the package is made on an aluminum license plate frame, Grinded and polished by hand through 16 procedures.Stronger than the true 100% carbon fiber license plate frame, No cracking deformation, Very beautiful twill weave pattern. PLEASE NOTE: This carbon fiber license frame is NOT 100% true carbon fiber frame.Made of :100% handmade + Aluminum license frame + Carbon cloth-HIGH COST. This link ONLY SELLS 1PACK LICENSE FRAME.
  • Perfect Fit Installation: Suitable pore size install licenses!!! More Multi-variety stainless steel license plate screws,You do not need to go to hardware store.Frame suitable for BMW license plate(NO BMW logo), Mercedes Benz, AMG, 4RUNNER, AUDI, LEXUS, Front license plate frame or rear frames installation. Improve your car appearance and match with your car's other high quality carbon.
  • Cool License Plate Frame: Well Made High Gloss Clear Finish protective coating. The Smooth shiny surface really pops!. Exclusive carbon fiber license plate frame screw caps, license plate frames and cover better match carbon license plate frame. Front license plate frame or rear frames installation. Improve you....
Check Stock

0.028 (24 ga.) x 12\ x 24\

  • 1095 blade steel specifications: 6 inches wide * 12 inches long * 0.16 inches thick.
  • Create your own custom knife that will last a lifetime. Made from high carbon steel, this AbbottoKaylan knife billet sharpens easily, resists chipping, and holds a great edge..
  • 1095 spring steel is a kind of high carbon steel, which has the characteristics of heat resistance, low temperature resistance, oxidation resistance, corrosion resistance, etc..
  • The highest quality of high carbon steel is 1095, which has a carbon content of 1.03%. After heat treatment, it can reach the hardness of HRc58-60. The toughness is very good, but it is not rust resistant. Large-scale felling knives and military knives such as the American "KA-BAR" army knives during World War II used 1095 as the blade material..
Check Stock

10.75 inches long Kukri point Blank blade, hand forged Ladder pattern Damascus steel hunting knife blade, knife making supplies, 3 Pin hole scale, 6" sharp cutting edge

  • Overall 10.75 inches Long hand forged full tang Ladder pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick Ladder pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

11 inches Long Kukri Point Dao Blank Blade, Hand Forged Twist Pattern Damascus Steel Hunting Knife Blade, 5" Finger Serrated Space with Finger Guard, 6" Sharp Cutting Edge

  • Overall 11 inches Long hand forged full tang twist pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.75" long finger serrated Scale space with finger guard.
  • Approximately 5 mm Thick twist pattern Damascus steel Kukri point blade. Our Damascus steel is prepared by forging over 200 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

11 inches long Damascus steel tracker knife blank blade, hand forged Ladder pattern Damascus steel tracker knife, Camping knife with 4 Pin hole, 6 inches cutting edge, 4.5' scale space

  • Overall 10.75 inches Long hand forged full tang Damascus steel tracker knife blank blade.
  • 5.5 inches long cutting edge. Up to standard Tracker and camping Knife blank blade.
  • 4.5" long Scale space with 4 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick Ladder pattern Damascus steel Tracker blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

10 inches Long Damascus Steel Nessmuk Blade Skinning Knife, Knife Making Supplies, Hand Forged rain Drop Pattern Damascus Steel Blank Blade Hunting Knife, 5.25" Cutting Edge, 4.5" Scale Space

  • Overall 10 inches Long hand forged full tang Damascus steel blank blade.
  • 5.25 inches long cutting edge. Up to standard Nessmuk skinning and Hunting Knife blank blade.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick rain drop pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

Whole Earth Supply Extra Large - Raindrop Damascus Tracker Blank Blade Knives Knife Making Blanks

  • Overall 11 inches Long hand forged full tang Damascus steel tracker knife blank blade.
  • 6 inches long cutting edge. Up to standard Tracker and camping Knife blank blade.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick fire pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low....
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

15" Long hand forged Damascus steel Hunting Bowie Knife, 2 tone Black Dollar wood with Brass finger guard, Cow Hide Leather sheath with belt loop

  • Overall 15" Long Bowie knife. 9.5" long blade Hand forged Damascus steel blade with 9 Inches cutting edge..
  • 5.5" long Black 2 tone Dollar wood with Brass spacer, Pommel and finger guard round scale.
  • Approximately 5 mm Thick Ladder pattern Damascus steel. Up to standard hunting Bowie Knife.
  • Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt..
  • Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC.
Check Stock