Categories

Best Low Cost Magnetic Coupling

Replacement Luraco Magnetic Jet Head BF-004 Fits Pedicure |spa Massage Chair| Tubs Spa Chairs Accessories.

  • 【Magnet Jet Head】Fit Shiatsulogic Pedicure Chair w/Discharge Pump Pedicure Tub | Pedicure Spa Chair Nail Salon Full Function Massage Chair,Pedicure chair parts with Pipe-less Whirlpool System Pedicure Spa..
  • 【 Easy Clean and Service】The magnetic head uses magnetic coupling technology, no shaft seal, will never leak, is worry free and Magnet-jet be easily clean..
  • 【Pedicure Spa Chair Magnetic Head】This Magnetic Motor Jet Head can be fitted with all Luraco magnetic Motor.Powerful and durable with 'No Splash' Design,Auto turn OFF to protect system when water level is low or magnet jet head is not attached..
  • 【Magnetic Head 】Size approx ：3 3/8"Diameter Back Head X 3 1/8"Diameter Front Head.Magnetic Head Set Include:1- base,1- magnetic impeller,1- cover..
  • NOTE: This Head will not fit to previous ECO jet system.When the magnetic induction pump is started, it will detect if there is enough water within 15 seconds. If there is not enough water detected within 15 seconds, it will automatically stop. If you want to start after stopping, you must cut off the power again, and then it can start..
  • 【After-Sales Guarantee】If you find that the product does not work, please check whether the pump is faulty. If you encounter any problems, please contact m....
Check Stock

5 PC - Brass Compression Elbow Fitting 1/4\ OD Tube x 1/8\ NPT Male Pipe

  • Elbow for connecting and disconnecting two tubes more easily than with a coupling.
  • Compression tube connections on all ends.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to +250 degrees F.
  • Three piece construction - nut, sleeve and body.
Check Stock

Vis Brass Compression Tube Fitting, Union, 1/2\ OD x 1/2\ OD (Pack of 5)

  • Union for connecting and disconnecting two tubes more easily than with a coupling.
  • Compression tube connections on both ends.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to +250 degrees F.
  • Three piece construction - nut, sleeve and body.
Check Stock

1/8 NPT Female Brass Bulkhead Fitting Bulkhead Coupling,1.5 Length Tank Fitting

  • 1/8" NPT female coupling for connecting 1/4 inch NPT fittings through a bulkhead.
  • For use with LP and natural gas, refrigeration, and hydraulic applications.
  • 1200 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER.
Check Stock

Anderson Metals 57014-06 Brass Hose Fitting Union 3/8 x 3/8 Barb

  • Union coupling for connecting two hoses with the same diameter in a straight run.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting for a tight seal on hoses.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Metalwork Compression Union Brass Tube Fitting, 2pcs (1/4\ OD x 5/16\ OD)

  • Union for connecting and disconnecting two tubes more easily than with a coupling.
  • Compression tube connections on both ends.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Three piece construction - nut, sleeve and body.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Vis Compression Union Straight, 3/8\ OD x3/8 inch OD COMP Brass Tube Fittings (Pack of 5)

  • Union Straight for connecting and disconnecting two tubes more easily than with a coupling.
  • Compression tube connections on both ends.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to +250 degrees F.
  • Three piece construction - nut, sleeve and body.
Check Stock

Heyiarbeit 5pcs 4mm to 4mm 2 Section Rotatable Universal Joint Coupling Shaft Stepper Motor L52xD12 U Joint Coupler Connector with Screw for RC Model Motor, RC Robot, DIY Encoder, CNC Machine

  • [Total Size] - Outer Diameter: 12mm / 0.47".
  • Connection Diameter: 4mm to 4mm / 0.16" to 0.16".
  • [Material] - This universal coupling is made of premium iron metal material, which is durable and has a long service life, fine workmanship.
  • [Feature] - The universal joint of the purpose is to firmly connect the driving shaft and the driven shaft to rotate together and transmit motion and torque, cost effective coupling design, which is very flexible and easy for use, and is great replacement for your old or broken one.
  • [Design] - Rotatable design. Allow the angle between the two axes within a limited range vary with operational needs, and easy to set up the items on the shaft and control the holding capacity of the coupling.
  • [Wide Application] - Universal joint coupling are used in servo motor systems, 3D printer, cnc machine, diy encoder, spindle transmissions, stepping motors, lifting platforms, machine tool transmissions, stepping motors, encoders, screw drives, machine platforms or gearboxes, etc.
  • Great suitable for short support shaft, bushing model, miniature Shaft, model airplane/ boat/ car.
Check Stock

Dixon BCM76 Brass Hose Fitting, Machined Coupling, 3/4\ GHT Male x 3/4\ Hose ID Barbed

  • Coupling for connecting two hoses or pipes with the same diameter in a straight run.
  • Connects to a hose on one end and a GHT female connector on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • For use with rubber (styrene butadiene), neoprene, Viton, leather, or rubber gaskets (not included).
  • Hex nut for tightening threaded fitting with a wrench.
Check Stock

Legines 2pcs Barb Union 1/2 Barbed x 1/2 Barbed Splicer Brass Hose Fitting Mender Joiner

  • Union coupling for connecting two hoses with the same diameter in a straight run.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting for a tight seal on hoses.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Legines 2pcs Barb Union 3/8\ Barbed x 3/8\ Barbed Splicer Brass Hose Fitting Mender Joiner

  • Union coupling for connecting two hoses with the same diameter in a straight run.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting for a tight seal on hoses.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

OdontoMed2011 New O.R Grade YANKAUER Pediatric Suction Tube INTSTRUMENT ODM

  • NON-CONDUCTIVE SUCTION TUBING: Provides easy handling and drapability with low coil memory. It also has thick tubing walls that offer safety and collapse-resistance at high vacuum pressures..
  • MAXI-GRIP CONNECTORS: Tubing is equipped with female patented connectors to accommodate a wide range of surgical instruments and equipment with a secure fit..
  • RIGID MALE CONNECTOR: In addition to the Maxi-Grip Connector, every sterile tube includes a rigid male connector for coupling additional tubes..
  • ECONOMICAL AND NON-STERILE: A cost-effective solution with the quality and reliability you need to remove fluids from the surgical field..
  • PRODUCT QUANTITY: The Cardinal Health Medi-Vac Non-Conductive Suction Tubing comes in a case of 50..
Check Stock

Cassida Tiger UV Digital Bill Counter with Ultraviolet Counterfeit Detection, Grey

  • From America's #1 Brand in Cash Handling, the Tiger Series is Cassida's lowest-cost business grade bill counter.
  • Counting 1,300 bills per minute, with UV Counterfeit Detection standard and Magnetic Counterfeit Detection available within the model range, the Tiger series is perfect for a businesses at a low-cost.
  • Cassida Tiger series features add, batch, add+batch modes and automatic or manual start/stop. The clam shell design allows complete cleaning and maintenance without special skills or technical support.
  • Steel Construction is rare in the low cost bill counter market, and comes standard on the Tiger Series, affording the Tiger the heaviest-duty bill counter in its price point.
Check Stock