Categories

Best Low Profile Connector

Qnap Network Expansion Card (LAN-1G2T-D)

  • Connector: 2 x M.2 22110 or 2280 PCIe (Gen 2 x4) NVMe SSD Slots.
  • Bracket: low-profile pre-loaded, low-profile flat and Full-height are bundled. M.2 SSDs are not included as standard.
  • Enables SSD caching to boost performance and optimizes storage efficiency with Qtier Technology.
  • A quiet cooling module (heatsink and smart fan) minimizes overheating risks and sustains constant high performance..
Check Stock

2 Ft S-Shape Castline Gold Mogami 2524 Guitar Pedal Board Patch Cable TS Low Profile Pancake Connector

  • PLEASE NOTE: The length of the pedal board cables is measured from tip to tip, see second picture..
  • Made with Castline Gold 1/4" Low Profile Right Angled Connector and Mogami 2524 Low Noise Cable..
  • 1/4" Low Profile Mono Plug with Gold Plated Tip. Gold tip for maximum connectivity. Black Electrophoretic coated back cover (non-conductive).
  • Mogami W2524 Low Nose Wire. Copper Conductor -20AWG. Cable Diameter: 6.0mm (0.236"). Flex Life: 15000 Cycles..
Check Stock

4-Pack 12' S-Shape Castline Gold Mogami 2524 Guitar Pedal Board Patch Cable TS Low Profile Pancake Connector

  • PLEASE NOTE: The length of the pedal board cables is measured from tip to tip, see second picture..
  • Made with Castline Gold 1/4" Low Profile Right Angled Connector and Mogami 2524 Low Noise Cable..
  • 1/4" Low Profile Mono Plug with Gold Plated Tip. Gold tip for maximum connectivity. Black Electrophoretic coated back cover (non-conductive).
  • Mogami W2524 Low Nose Wire. Copper Conductor -20AWG. Cable Diameter: 6.0mm (0.236"). Flex Life: 15000 Cycles..
Check Stock

Syba 2 Port Industrial DB9 RS-232 Serial PCI Card - Serial COM Port RI +5V +12V - Molex Powered - WCH351 Chipset - 16C550 UART SD-PCI15039, Green

  • Supports both standard profile and low profile computer chassis.
  • Jumper settings: (voltage for pin 1 and 9 of each Serial DB9 connector/ri+5v+12v.
  • Fully compliant with PCI local bus Specification Revision 2. 3.
  • Supports Both Standard Profile and Low Profile Computer Chassis.
  • Fully Compliant with PCI Local Bus Specification Revision 2.3.
  • Compatible to Industrial Standard 16C450, 16C550, 16C552 and Enhanced UART.
Check Stock

Dell Optiplex 755 Motherboard PU052

  • Genuine DELL F373D Motherboard For the Optiplex 760 Small Form Factor System.
  • Chipset: Intel Q43 Express Chipset w/ICH10D | Processor: Intel Core 2 Duo.
  • FSB up to 1333 MHz, Intel Pentium Dual-Core.
  • Memory: 2x 667-MHz or 800-MHz DDR2 SDRAM.
  • non-ECC memory only, 4gb Max Total | Audio: Integrated ADI 1984A high definition audio | Video: Intel integrated video | Expansion Capabilities: 1x PCI Slot for Half-Length Cards, 1x Low-Profile PCI-E x16.
  • Peripheral Interfaces: 2x Connectors for Line-In/Microphone and Line-Out, 1x eSATA Connector, 1x RJ45 Ethernet/Network Connector, 1x 25-Pin Parallel Connector, 1x 9-Pin Serial Connector, 6x USB 2.0 Connectors.
  • Motherboard Part Number: F373D, M863N, N449H, J656F.
Check Stock

QVS 2Port DSL Line Filter with Phone Jack

  • Cable Type: Low-Profile Power| Cable Technology: Coaxial| Left Connector Type: Power NEMA 5-15R| Right Connector Type: Power NEMA 5-15-P| Color: Black.
Check Stock

mophie Powerstation Reserve with Micro USB Connector (1,000mAh)- Black

  • Compact and low profile design allows to easily be slipped into a pocket..
  • Flexible and integrated USB and hidden connector stay concealed until ready to charge. No need to carry a charging cable..
  • Integrated 4 LED charge status indicator.
Check Stock

- 5 Inch - S-Shaped Pedal, Effects, Patch, instrument cable CUSTOM MADE By WBC – made using Mogami 2524 wire and Eminence Gold Plated (6.35mm) R/A Pancake type Connectors

  • This is a custom built cable assembly, made by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2524 wire and Eminence Premium Gold Plated 1/4 Inch right-angled, low profile Pancake type Connectors. We at WBC always make world-class custom-built cable assemblies using many of the leading cable and connector brands, if you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you.
  • The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios and leading sound engineers around the world. All Mogami cables are made in Nagano – Japan using the best materials and technological expertise of decades of R&D..
  • The brand of connector we used for this custom cable assembly: Eminence Premium Gold Plated 1/4 Inch right-angled, low profile Pancake type Connector - Heavy-duty construction with the lowest profile pancake design in the market to save space. High-End Gold plating increases conductivity, tarnish-resistance & visually compliments the rig. Custom Boot protects the cable from damage by handling stresses. PLEASE CHECK PLUG DIMENSIONS PRIOR TO THE PURCHA....
Check Stock

Dell Motherboard USFF HX555 Optiplex 755

  • Genuine DELL F373D Motherboard For the Optiplex 760 Small Form Factor System.
  • Chipset: Intel Q43 Express Chipset w/ICH10D | Processor: Intel Core 2 Duo.
  • FSB up to 1333 MHz, Intel Pentium Dual-Core.
  • Memory: 2x 667-MHz or 800-MHz DDR2 SDRAM.
  • non-ECC memory only, 4gb Max Total | Audio: Integrated ADI 1984A high definition audio | Video: Intel integrated video | Expansion Capabilities: 1x PCI Slot for Half-Length Cards, 1x Low-Profile PCI-E x16.
  • Peripheral Interfaces: 2x Connectors for Line-In/Microphone and Line-Out, 1x eSATA Connector, 1x RJ45 Ethernet/Network Connector, 1x 25-Pin Parallel Connector, 1x 9-Pin Serial Connector, 6x USB 2.0 Connectors.
  • Motherboard Part Number: F373D, M863N, N449H, J656F.
Check Stock

Dell Optiplex 755/GX755 Motherboard - DR845

  • Genuine DELL F373D Motherboard For the Optiplex 760 Small Form Factor System.
  • Chipset: Intel Q43 Express Chipset w/ICH10D | Processor: Intel Core 2 Duo.
  • FSB up to 1333 MHz, Intel Pentium Dual-Core.
  • Memory: 2x 667-MHz or 800-MHz DDR2 SDRAM.
  • non-ECC memory only, 4gb Max Total | Audio: Integrated ADI 1984A high definition audio | Video: Intel integrated video | Expansion Capabilities: 1x PCI Slot for Half-Length Cards, 1x Low-Profile PCI-E x16.
  • Peripheral Interfaces: 2x Connectors for Line-In/Microphone and Line-Out, 1x eSATA Connector, 1x RJ45 Ethernet/Network Connector, 1x 25-Pin Parallel Connector, 1x 9-Pin Serial Connector, 6x USB 2.0 Connectors.
  • Motherboard Part Number: F373D, M863N, N449H, J656F.
Check Stock

3 Units - 12 Inch - Pedal, Effects, Patch, Instrument Cable Custom Made by WORLDS BEST CABLES – Made Using Mogami 2319 Wire and Eminence Gold Plated ¼ inch (6.35mm) R/A Pancake Type Connectors

  • This is a custom built cable assembly, made by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2319 wire and Eminence Premium Gold Plated 1/4 Inch right-angled, low profile Pancake type Connectors. We at WBC always make world-class custom-built cable assemblies using many of the leading cable and connector brands, if you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you.
  • The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios and leading sound engineers around the world. All Mogami cables are made in Nagano – Japan using the best materials and technological expertise of decades of R&D..
  • The brand of connector we used for this custom cable assembly: Eminence Premium Gold Plated 1/4 Inch right-angled, low profile Pancake type Connector - Heavy-duty construction with the lowest profile pancake design in the market to save space. High-End Gold plating increases conductivity, tarnish-resistance & visually compliments the rig. Custom Boot protects the cable from damage by handling stresses. PLEASE CHECK PLUG DIMENSIONS PRIOR TO THE PURCHA....
Check Stock

15 Inch - S-Shaped Pedal, Effects, Patch, Instrument Cable Custom Made by WORLDS BEST CABLES – Made Using Mogami 2524 Wire and Eminence Gold Plated (6.35mm) R/A Pancake Type Connectors

  • This is a custom built cable assembly, made by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2524 wire and Eminence Premium Gold Plated 1/4 Inch right-angled, low profile Pancake type Connectors. We at WBC always make world-class custom-built cable assemblies using many of the leading cable and connector brands, if you are unable to find the length and type of cable you are looking for, please feel free to contact us,we will strive to assemble the required cable for you..
  • The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios and leading sound engineers around the world. All Mogami cables are made in Nagano – Japan using the best materials and technological expertise of decades of R&D..
  • The brand of connector we used for this custom cable assembly: Eminence Premium Gold Plated 1/4 Inch right-angled, low profile Pancake type Connector - Heavy-duty construction with the lowest profile pancake design in the market to save space. High-End Gold plating increases conductivity, tarnish-resistance & visually compliments the rig. Custom Boot protects the cable from damage by handling stresses. PLEASE CHECK PLUG DIMENSIONS PRIOR TO THE PURCHA....
Check Stock

18 Inch - S-Shaped Pedal, Effects, Patch, Instrument Cable Custom Made by WORLDS BEST CABLES – Made Using Mogami 2524 Wire and Eminence Gold Plated (6.35mm) R/A Pancake Type Connectors

  • This is a custom built cable assembly, made by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2524 wire and Eminence Premium Gold Plated 1/4 Inch right-angled, low profile Pancake type Connectors. We at WBC always make world-class custom-built cable assemblies using many of the leading cable and connector brands, if you are unable to find the length and type of cable you are looking for, please feel free to contact us,we will strive to assemble the required cable for you..
  • The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios and leading sound engineers around the world. All Mogami cables are made in Nagano – Japan using the best materials and technological expertise of decades of R&D..
  • The brand of connector we used for this custom cable assembly: Eminence Premium Gold Plated 1/4 Inch right-angled, low profile Pancake type Connector - Heavy-duty construction with the lowest profile pancake design in the market to save space. High-End Gold plating increases conductivity, tarnish-resistance & visually compliments the rig. Custom Boot protects the cable from damage by handling stresses. PLEASE CHECK PLUG DIMENSIONS PRIOR TO THE PURCHA....
Check Stock