Categories

Best Low Temperature Ball Valve

PVC COMPACT BALL VALVE 4" - Socket - Sanipro

  • EZ-FLO SCHEDULE 40 PVC BALL VALVE: This EZ-FLO ball valve is suitable for use as an inline valve for connecting two pipes going in the same direction.
  • equipped with a 3/4 inch slip connection on each end.
  • DURABLE: This schedule 40 PVC ball valve is made of heavy-duty CPVC that protects against corrosion and provides strength and durability.
  • EASY TO USE: This PVC ball valve is equipped with a quarter-turn red plastic handle for an easy-to-control water flow.
  • SPECS: This valve can withstand a working pressure of 150 PSI and a maximum temperature of 140 degrees F.
  • SAFETY: This ball valve complies with lead-free guidelines for potable water applications.
Check Stock

Big Autopart Valve Cover Bolts, Chrome Valve Cover Wing Bolts for Chevy V8, 4 Pack

  • ★High-quality materials ---- Stainless steel is resistant to corrosion, high temperature, low temperature, long service life, and reduces the cost of replacement. for sbc valve cover bolts wing nuts.
  • ★High-quality materials ---- Stainless steel is resistant to corrosion, high temperature, low temperature, long service life, and reduces the cost of replacement..
  • ★High-quality accessories ---- Matching the original car, it is worth buying high-quality accessor....
Check Stock

3/8 Electric Solenoid Valve 12-VDC VITON Gasket Air Gas Fuel Normally Closed

  • -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
Check Stock

TOKHAROI 1/4’’ Quick Connect Inch Pressure Washer Ball Valve Kit, Carbon Steel Valve for Pressure Washer Hose, 4000 PSI

  • The ball valve kit is designed for high-pressure hoses.High pressure ball valve has 1/4’’ quick connector and 1/4’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • The max working pressure is 4000 PSI. The max working temperature is 158 F..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
  • Quick Disconnect Fitting: 1/4’’ quick coupler plug + 1/4’’ male NPT thread.
Check Stock

RIDGE WASHER High Pressure Ball Valve Kit for Power Washer Hose, 3/8” Quick Disconnect, 4500 PSI

  • High pressure ball valve kit includes a ball valve and two adapters. The adapter set converts 3/8” quick coupler plug to 3/8” male NPT thread and 3/8” quick coupler socket to 3/8” male NPT thread..
  • Working pressure is up to 4500 PSI. The max working temperature is 158 °F..
  • The steel pressure washing ball valve is superior leak resistance. Easy to connect ball valve to gun, pump and hose..
  • The ball valve is easy to turn on and off, provides good leverage under high pressure, designed for high-pressure hose..
  • If you have questions, contact us at any time. We provide a service of quick reply within 24 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..
Check Stock

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

  • ... 【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
  • 【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to worry about leaks occurring, ball valve dn10 will definitely save your time and money..
  • 【 Easy to Use 】 Ball valve for foam cannons withstand high pressure operation while providing good leverage, opening and closing pressure washer ball valve effortlessly, allowing safe and easy tool replacement. Helps you switch easily without shutting down the entire system, making your work easier and more convenient..
Check Stock

Yaeccc 4500PSI Washer Ball Valve Kit, 3/8 Inch Quick Connect for Power Washer Hose

  • High pressure ball valve has 3/8’’ quick connector and 3/8’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The max working pressure is 4500 PSI. The max working temperature is 158 F..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • Quick Disconnect Fitting: 3/8’’ quick coupler plug + 3/8’’ male NPT thread.
  • 3/8’’ quick coupler socket + 3/8’’ male NPT thread..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
Check Stock

STYDDI Stainless Steel High Pressure Washer Shut-Off Ball Valve Kit with 3/8' Quick Connect for Power Washer Hose, 4500 PSI

  • PREMIUM MATERIAL ENSURES HIGH QUALITY - The shut-off ball valve is made of premium quality stainless steel, housing with stainless steel handle and insert. Great quality stainless steel brings durability and long rust free service life. It can attain maximum working pressure of 4500 PSI and maximum working temperature of 158 degree Fahrenheit..
  • EASY TO USE - The design pattern of this pressure washer shut-off ball valve is constructed in a way that it can sustain high pressure working and provide good leverage under high pressure. The functioning working of this ball valve is very easy as it has quick connecting and disconnecting fitting. It is also easy to turn on and off..
  • SUPERIOR LEAK RESISTANCE - One of the great feature of this pressure washer ball valve is its great leak resistance with the teflon tape. With this leak free ball valve, it will definitely save your time and effort when pressure washing..
Check Stock

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
  • This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
  • The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
  • There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different diameters. Has a 3/8” male NPT threaded on one end and a 1/4” female....
Check Stock

Tool Daily High Pressure Washer Ball Valve Kit, 3/8 Inch Quick Connect for Power Washer Hose, 4500 PSI

  • High pressure ball valve has 3/8’’ quick connector and 3/8’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • The max working pressure is 4500 PSI. The max working temperature is 158 F..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
  • Quick Disconnect Fitting: 3/8’’ quick coupler plug + 3/8’’ male NPT thread.
  • 3/8’’ quick coupler socket + 3/8’’ male NPT thread..
Check Stock

MASTERCOOL 58490-YF Universal R1234yf Valve Core Remover/Installer Master Kit Brass,Silver,Red,Blue

  • PERFECT TOOL for replacing damaged valve cores with R1234yf refrigerant in the system without losing the systems charge.
  • ATTACHES TO R1234yf SERVICE PORTS to quickly and easily remove and replace valve cores without the loss of refrigerant.
  • BALL VALVE DESIGN with stainless steel ball provides smooth movement and durability.
  • KIT COVERS 17 mm and 14 mm high and low side service ports.
  • INCLUDES standard valve core shaft, GM large bore valve core shaft, Eaton R134a/R1234yf high side valve core shaft, low side 14 mm connector, high....
Check Stock

3/4\ NPT Female Threaded IPS Ball Valve Full Port Water Stop Shut Off,Heavy Duty Lead Free Brass,Quarter Turn,Blue Handle (1-Pack)

  • 3/4" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
  • Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
  • 3/4" Threaded IPS Lead Free Brass Water Cut off Ball Valve.
  • Size: 3/4" IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
  • IAPMO Listed to cUPC - "Lead-Free" Compliant.
Check Stock

Aupoko R134A Valve Core Quick Remover Installer, High Low Pressure Valve Core Remover Tools Kit for R13A Refrigerant Air Conditioner System

  • ★ USEFUL TOOL KIT ---- This valve core remover tools Kit includes high pressure (Red) and low pressure valve core quick remover installer, 1 pc valve core remover, 5pc R134a valve cores and 5pc 5V1 valve cores..
  • ★ HIGH & LOW PRESSURE QUICK COUPLER ---- High pressure coupler (Red), with inner diameter 16 mm, and Low Pressure coupler (Blue) with inner diameter 13 mm..
  • ★ ADJUSTABLE ---- The R12 valve core quick remover installer is adjustable to fit the different valve core. Good for vehicle/car/auto air condition, household air conditioner, HVAC Maintenance or repairing..
  • ★ WELL-DESIGN ---- Built-in stainless-steel ball valve: the well-designed ball valve and threaded remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss..
  • ★ 1 YEAR WARRANTY ---- Valve Core Quick Remover Installer sets are made by high quality brass alloy, last long.
  • easy to operate and install, strong sealing for durability and safety. We offter 12 months warranty, should be there any question, please feel free to contact us..
Check Stock