Best Low Temperature Curing Agent
Insta Cure #1 (Prague Powder 1) - Curing Salt for Meat and Sausage - 8 oz. - The Sausage Maker
- Insta Cure #1 is a simple, easy to use curing agent for meats that require cooking, brining (wet curing), smoking, or canning. This includes jerky, ham, bacon, brisket, sausage, snack sticks, corned beef, pâtés, pastrami, luncheon meats, meat loaves, poultry, fish and more.
- Curing meat helps to prevent common food borne illnesses associated with trapped air in meat mixture. For use on low & slow smoked/cooked meats with a short curing window.
- Packet Contains 8 oz. of Insta Cure #1, enough to process approximately 240 lbs. of meat.
- The Sausage Maker recommends using 1 level teaspoon per 5 lbs. of ground meat. Recipes may call generic names such as “curing salt".
- Insta Cure is a Trademark of The Sausage Maker Inc. Made in USA.
Check Stock
West System 209-SB Extra Slow Hardener
- 209 EXTRA SLOW HARDENER is a low-viscosity epoxy curing agent. It is useful in a majority of hot-weather bonding situations, and when very long working time and cure time are needed. 209 Extra Slow Hardener produces a slow epoxy cure that develops physical properties gradually at room temperature. It yields a rigid, high-strength moisture-vapor resistant and functionally waterproof solid..
- USE WITH WEST SYSTEM 105 RESIN for general coating and bonding applications in extremely warm and/or humid conditions, and for extended working time at room temperature. Forms a clear, amber-colored solid with good physical properties and moisture resistance for bonding and coating applications..
- PROVIDES ABOUT TWICE the working time of 206 Slow Hardener. 209's pot life at 72°F (22°C) is 40 to 50 minutes. Pot life at 95°F (35°C) is 15 to 20 minutes. Cures to a solid state at 72°F (22°C) in 20 to 24 hours. Cure to a solid state at 95°F (35°C) in 6 to 8 hours. Reaches maximum strength at 72°F in 4 to 9 days Minimum recommended working temperature is 70°F (21°C)..
- PAIR WITH WEST SYSTEM 105-B Epoxy Resin. Blend with with WEST SYSTEM 105 Epoxy Resin at a 3-parts resin to 1-part hardener ratio..
- EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to ....
Check StockVbest life Fishing Lure Light Deep Underwater Saltwater Freshwater Lures Attractant Light Water-Triggered LED Lighted Bait Flasher (Blue)
- USB Power Supply: Can be used as mobile power supply or computer power supply, convenient and fast, widely used..
- Wide Compatibility: Can be used for UV adhesive curing, resin curing, smart phone repair, IC chip repair, pet urine stain detection, power output up to 3W..
- Manufacturing Material: Made of purple LED light and high quality ABS, stainless steel and copper materials, wavelength can get 395nm, and durable..
- Dual Chips Design: Brightness increased by 30%, dual chips design, rugged, compact and flexible UV LED table lamp with 8mm gooseneck tube..
- Multiple Functions: Cable reinforcement, solder joint protection, UV adhesive curing, resin version curing, nail polish curing, no shadow curing, fluorescent agent detection, mobile phone screen curing..
Check Stock
Hoosier Hill Farm Prague Powder No.1 Pink Curing Salt, 2.5 Pound
- Prague Powder #1 can be used in the preserving and curing of: Semi-dry and cooked meats, Sausage, Fish, Jerky, Bacon, Ham, Pastrami, Hard Salami, Corned Beef..
- Contains 2.5 lbs of Prague Powder No.1 Pink Curing Salt, also referred to as Tinted Cure or Pink Curing Salt. A critical component in the meat curing and sausage making process, enough to cure 1000 lbs of meat..
- Hoosier Hill Farm is located in America’s heartland of northeast Indiana. Our products and ingredients are guaranteed fresh and we are proud of our heritage and good, old-fashioned values!.
- Use 1 oz. of cure for 25 lbs. of meat or 1 level teaspoon of cure for 5 lbs. of meat or fish. Mix cure with cold water. Too much or too little Pink Curing Salt can adversely affect health, taste, and food quality..
- To cure correctly and within food safely guidelines, it is extremely important to use the proper amount of Prague Powder #1. As a curing agent, Prague Powder #1 serves to inhibit bacteria growth and helps to maintain meat flavor and appearance..
Check Stock
Bewinner UV Glue Curing Lamp Ultraviolet 3W USB LED Purple Light - LED Lamp Bead,Wavelength: 395 - USB Powered,Support Plug and Play - Wide for Repairing Phones or Fluorescent Agent Detection
- 【Multi-Purpose Maintenance Light】UV glue curing LED purple light is used for cell phone circuit board repair. It can also be used for fluorescent agent detection and fluorescent banknotes..
- 【Flexible Uv Glue Curing Lamp】The gooseneck can be bent freely in 360 degrees, and the height and direction of the light can be flexibly adjusted to always find the ideal position. With fixing clip to ensure smooth and stable operation..
- 【USB Powered】The UV glue curing lamp is equipped with a control switch and a USB power supply interface. It supports plug and play and is easy to use. 3W LED lamp beads, wavelength: 395, low power consumption, long life, safety and environmental protection..
- 【Easy To Use】The UV glue curing lamp is equipped with a clip, which is very suitable for fixing on the bedside table, desk, laptop table, headboard, etc. The clip can be opened 3 to 5 cm, the metal arm can bend flexibly, but at the same time it can fix the position..
- 【Quality Service】If the product has any quality problems or you have any questions about this product, you can contact us at any time,we have a 24-hour online professional customer service team.we will try our best to solve your problem in time,please rest assured to buy..
Check Stock
Silver Conductive Epoxy Adhesive, 1.0ML Electrically Conductive Adhesives for Repair Conduction Paint Connectors Board Paste Wire
- Easy to use -- The pure silver powder medium of conductive silver paint has excellent electrical conductivity and moisture resistance and dryness..
- Strong adhesion -- The silver glue has excellent adhesion and covering power on various materials such as PC, PET, PVC, PU and other films, resin plates, coated paper, glass, copper sheets, aluminum plates, etc..
- Features -- The conductive adhesive silver glue has the feature of strong adaptability, stable conductivity, single component, low temperature curing, excellent adhesion and extremely low square resistance..
- High‑purity silver -- This conductive silver paint is a high‑purity silver, low resistance, fast‑drying product, with controllable conductivity, low‑temperature curing and has a good electromagnetic wave shielding effect..
- Application -- The conductive adhesive silver glue is widely used in home supplies, electrical items, CPU in computer, LED display, LCD display, optical fiber communication equipment, controller, heat sink and led etc..
Check Stock
DATOU BOSS Infrared Paint Curing Lamp 1000W with Timer Shortwave Infrared Heat Lamp for Car Body Repair Paint Curing Systems,Body Repair Paint Tools,with Adjustable Bracket,Heat Lamps for Paint Booth
- ✨【Curing Area】This paint baking lamp can cure 65*50cm , and the working temperature can reach 60-80℃ (140-176℉). Equipped with a powerful 2000W shortwave infrared lamp, which can make heat flow back through conduction coating..
- ✨【Timing Function】0-90 minutes intelligent timing function, automatically stop curing and heating at that time, which can effectively avoid curing and heating for too long and causing damage (set the time as needed).
- ✨【Infrared Shortwave】Infrared shortwave adopts quartz halogen infrared tube, high luminous efficiency, strong penetrability, less visible light, low glare.
- heating directly from the inside, shortening the curing time, and high working efficiency.
- ✨【Heat Dissipation Performance】It adopts anti-corrosion aluminum alloy shell, metal mesh cover and 2 metal side covers with cooling hole design. It is more durable than plastic shell at high temperature and improves the heat dissipation efficiency to avoid high temperature damage..
- ✨【Widely Application】Infrared curing lamps are widely used in car spray booths, partial paint drying, putty drying, and car spray booths. It is an ideal tool for on-site repair, engine drying, strip removal, and drying. And we are the production factory, if you nee....
Check Stock
PUSOKEI Silver Conductive Glue Wire Electrically Paste Adhesive Paint 1.0ML Conductive Glue high Viscosity Conductive Adhesive for Home Supplies Electrical Items CPU in Computer
- The conductive adhesive silver glue has the feature of strong adaptability, stable conductivity, single component, low temperature curing, excellent adhesion, oxidation resistance, and extremely low square resistance..
- This conductive silver paint is a high‑purity silver, low resistance, fast‑drying product, with controllable conductivity, low‑temperature curing and has a good electromagnetic wave shielding effect..
- The pure silver powder medium of conductive silver paint has excellent electrical conductivity and good abrasion resistance, moisture resistance and dryness..
- The conductive adhesive silver glue is widely used in home supplies, electrical items, CPU in computer, LED display, LCD display, optical fiber communication equipment, controller, heat sink and led etc..
- The silver glue has excellent adhesion and covering power on various materials such as PC, PET, PVC, PU and other films, resin plates, coated paper, glass, copper sheets, aluminum plates, etc..
Check StockSolary Baking Infrared Paint Curing Lamp 1000W 110V Handheld Short Wave Infrared Paint Dryer Lamp for Car Bodywork Repair
- ... even and increasing the curing area, shortening the curing time..
- 【Lightweight and Portable】This Handheld Baking Infrared Paint Dryer is lightweight and portable, easy to control manually, offering great flexibility and convenience. With cooling hole design and improved heat dissipation efficiency to avoid high temperature damage..
- 【Wide Range of Uses】The infrared paint baking lamp are widely used in car paint room, local paint drying, dry putty, metalworking, car foil, furniture baking, ect. It is an ideal tool for on-site repair, engine drying, strip removal..
- 【Safe to Use】Our shortwave infrared paint lamp use high quality halogen lamp tube, high luminous efficiency, strong penetrability, low glare, the light is not harmful to your eyes and skin. The heating process is clean, without hot air and secondary pollution..
Check Stock
REALINN Epoxy Tile Grout Bright Porcelain White 400 ml, Dual Tube Waterproof Stain-Proof Colorant Resin Sealer, Restore and Spruce Up Tile Grout Line for Bathroom Kitchen Wall Floor
- Epoxy Grout, made of epoxy resins combined with curing agent, pigment. Advanced double tube design, easy to apply, no mixer pre-mix, just one double tube epoxy gun to finish the job. (NOTE: Caulking gun and tools are not included. ).
- Color: Bright Porcelain White. Even color, long lasting and no discoloration. Non-hazardous, no unpleasant odor..
- Strong and durable, with greater bond strength and greater flexibility. Heat and cold resistant, no cracking, shrinkage or discoloration..
- Waterproof and stain-proof, widely used in tile showers and kitchens, floors and walls, splashback tiling over vanities and countertop, surfaces underneath sinks or basins, swimming pools, could use both indoor and outdoor. Ideal replacement for regular grout and sealant caulk..
- Kit includes: Double tube epoxy grout (200g for tube A + 200g for tube B) + 3 static mixing nozzle. Tips: When using the first time, please squeeze out grout about 30 cm and discard. Prevent failure to dry and poor adhesion due to uneven mixing of pigment and curing agent..
Check StockPARTALL Film #10 Polyvinyl Alcohol (PVA) Gallon
- Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
- Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
- Protects against mold hang ups with polyester and vinyl-ester resins.
- also used with epoxy and urethane resins.
- PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
- Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check StockPVA - PARTALL Film #10 Polyvinyl Alcohol (PVA) Pint
- Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
- Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
- Protects against hang ups with polyester and vinyl-ester resins.
- also used with epoxy and urethane resins.
- PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
- Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check StockPARTALL Film #10 Polyvinyl Alcohol (PVA) Half Gallon
- Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned molds can be reactive)..
- Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
- Protects against surface hang ups with polyester and vinyl-ester resins.
- also used with epoxy and urethane resins.
- PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
- Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock
