Goshfun Motherboard Kit for Repairing and Upgrading of NERF Modulus Regulator C1295 Regulator
- The modified body can be refit 12v lithium battery..
- Since the original main body can not modify aluminum battery after changing the flywheel, it is very limited in performance. After the main board is modified, the main board can withstand the voltage of 12-20v, and the lithium battery can be discharged with large rate, which is convenient for subsequent modification of metal flywheel, flywheel cage and other products.
- Feature-rich: Single / three / burst mode, dart count, empty magazine on-hook, flywheel instantaneous stop / noise reduction control, voltage display and low voltage prompt.
- Motherboard kit for repairing and upgrading damaged motherboard of NERF modulus Regulator C1295 REGULATOR.
- Simple installation: the wire is fixed with screw column, can be installed without welding. Wide voltage operation (6-12V). Can hold for most 2s motor.
Check StockHoneywell R8285B1053 Fan Center with DPDT Switch Action 40 VA
- Transformer powers low voltage control systems and provides overload protection.
- Low voltage terminal board provides convenient connections for thermostat and heating and cooling equipment wiring.
- Mounts on standard 4 x 4 in. Junction box. Relay is easily replaced without disturbing wiring.
Check StockVCE Low Voltage Mounting Bracket 1 Gang 5 Pack for Single Gang Wall Plate Telephone Wires Network Cables HDMI Coaxial Speaker Cables Black
- VCE single gang (1-gang) low voltage mounting bracket - black (pack of 5)..
- Adjusts to fit 1/4-inch to 1-inch thick wall board, paneling, or drywall.
- Easy to install, for mounting low voltage wires(phone, internet, TV, video)..
- Horizontal or vertical mounting, adjusts to fit various wall thickness, the bracket wings secure when mounting screws are tightened..
- Package contents:5 x Single Gang Low Voltage Mounting Bracket Pieces per plastic bag..
Check StockATX Power Supply Breakout Board and Acrylic Case Kit with ADJ Adjustable Voltage Knob, Supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) Output Voltage, 3A Maximum Output, Reset Protection. New Version
- ATX power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage.
- The voltage output terminals of the ATX power expansion board correspond to each screw terminal..
- Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi Bluetooth and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc.
- Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc..
Check StockNew Version ATX Power Supply Breakout Board and Acrylic Case Kit with ADJ Adjustable Voltage Knob, Supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) Output Voltage, 3A Maximum Output, Reset Protection.
- 1.ATX power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage..
- 2.The voltage output terminals of the ATX power expansion board correspond to each screw terminal..
- 3. At the same time, the panel is also equipped with an acrylic case kit for easy to use..
- 4.Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi Bluetooth and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc..
- 5.Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc..
Check StockAOICRIE 12V 16-Channel Relay Interface Board Module Optocoupler LED LM2576 Power for Arduino DIY Kit PiC ARM AVR
- ★12V 16-Channel Relay interface board, and each one needs 15-20mA Driver Current.
- ★Equipped with high-current relay, AC250V 10A.
- ★The control signal voltage range: the trigger signal is low 0-2V.
- ★Standard interface that can be controlled directly by microcontroller (for Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP433, TTL logic).
- ★DC 12V 16 Channel Relay Module Interface Board With Optocoupler Protection LM2576 Power for Arduino DIY Kit.
Check StockUWAYKEY Bluetooth Amplifier Board 2.1 Channel Class D AMP Module with Dual TPA3116D2 Chip
- 【TPA3116D2 HIFI Chip Solution】 Stereo Dual-channel Output to Ensure Continuous Serial High-power Operation, THD ≤0.1%. Wide Voltage Input DC:....
- 【Treble & Bass Control】 If You Are Tired of The Inherent High& Low Bass, Why Not Try The High & Low Control Knob! This Will Make You Feel Like....
- 【Bluetooth and AUX Function】 Bluetooth 5.0 version, Transmission Distance Is Farther. The Transmission Distance Can Reach 49 Feet In An Open....
- 【Safety Protection】 This Amp Board Has Overheat Protection, Reverse protection, Circuit Protection, Over-voltage and Under-voltage Protection.
- 【7 * 24 Hours After-sales Service】 Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any....
Check StockQWORK 10 Pack Low Voltage Mounting Bracket, for Telephone Wires, Network Cables
- Fully adjustable: Adjust to fit 1/4 inch to 1 inch thick wallboard, gypsum board or paneling..
- Designed for: For flush installation of wall panels, with oval holes on the bracket for final displacement and straightening..
- Easy Installation: Horizontal or vertical installation, used to install low-voltage wires and cables, with fast installation speed..
- Usage: Used to install low-voltage wires and cables, for Telephone Wires, Network Cables, HDMI, Coaxial, Speaker Cables..
- 100% Satisfied Service: Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month..
Check Stock
AITRIP 12PCS TCA9548A I2C IIC Multiplexer Breakout Board Module 8 Channel Expansion Development Board for Arduino
- The TCA9548A adapter is connected to an I2C device with multiple identical addresses on the same I2C port on the main control board for normal communication and use.There are 8 I2C interfaces on one expander, and there are eight bidirectional transfer switches that can be controlled by I2C bus. This means that after 1 expander is transferred, 8 identical addresses can be connected to the same I2C port..
- Expansion board TCA9548A compatible with IIC bus and system management bus (SMBus), active low reset input, support for hot insertion, low standby current, no glitch during power-up, support for voltages between 1.8V, 2.5V, 3.3V and 5V buses Level shifting, TCA9548A I2C IIC multiplexer breakout board depending on the contents of the programmable control registers, any single SCn/SDn channel or combination of channels can be selected..
- 12pcs TCA9548A I2C IIC Multiplexer Breakout Board 8 Channel Expansion Board for Arduino.
Check StockAcxico 2Pcs LM386 10W Mini Power Amplifier Board Audio Amplifier Module DC 3-12V Volume Adjustable Control
- Wide operating voltage range: 3-12V, suggestion ≥5V.
- Speaker power: 05W-10W, suggestion 8W speaker is the best.
- Low static power consumption, the quiescent current of approximately 2MA, ideal for battery-powered.
- Low power consumption, updated within the chain gain adjustable,large supply voltage range, fewer external components and total are widely used,....
- On-board volume control potentiometer clockwise to increase the volume,with power indicator light..
Check Stock
ACEIRMC 3pcs 20A 300W CC CV Step Down Module Adjustable DC 6-40V to 1.2-36V Voltage Regulator Buck Converter Constant Current Power Supply Module
- Aceirmc buck converter input voltage range is DC 6-40V, adjustable output voltage range is DC 1.2-36V, can be used to convert 24v to 12v 5v, adjustable output current range is 0-20A, max output power is 300W. The step down regulator can apply to constant output current..
- With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current. The efficiency can be up to 95%,(measured at 20A, converting 24V to 12V)..
- Short Circuit Protection: Self-recovery(cannot short circuit for long time). Plus, when input and output is common grounded, no-load CV output constant voltage,CC output constant current.
- Adopting 75V / 80A large current dual MOS tube designed step-down board, Input and output use high frequency low resistance electrolytic capacitor, low ripple, and gives a stable output. Large current 30A connection screw terminals, more convenient to install.
- Application: DIY stabilized voltage supply, LED car display, mobile power, industrial equipment appliances, LED driver, monitor, solar energy, fans, photovoltaic energy, motor, etc....
Check Stockuxcell 300mA 3W LED Chip Bulb Surface Mounted Devices Light Beads Warm White Super Bright High Power or Floodlight 4pcs
- High Power LED, saving power,very low heat generating..
- Note: The LED lamp board must be powered by constant current LED driving power supply, and the output parameters of the power supply are consistent....
Check Stock
Motor Controller, DROK PWM DC Motor Speed Controller 10-50V 60A High Power HHO RC Driver PWM Controller Module 12V 24V 48V 3000W Extension Cord with Switch
- Parameter: DROK DC motor controller operating voltage range is DC 10-50V, max rated current is 60A, control power range is 0.01-3000W, working temperature range of -20℃-40℃..
- High-end Configuration: Our motor driver control board uses PWM modulation system to adjust light & speed. In addition, it is designed with radiators to doing heat dissipation created by MOS tube..
- Convenient Speed Control: With wires to connect potentiometer and regulation switch to control the speed, it is convenient to use..
- Low Quiescent Current: our speed regulation module is designed with low quiescent current 0.04A(When the working voltage is DC10V-50V, the quiescent current cannot exceed 40mA)..
- Wide Application: our motor driver control board can be applied to universal DC brush motor speed regulation.
- production line conveyor belt speed regulation.
Check Stock
