Categories

Best Low clearance U bolt

Supreme Suspensions - Full Lift Kit for 2005-2011 Dodge Dakota 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Round Bend U-Bolts 2WD

  • COMPATIBLE WITH 2005 - 2011 Dodge Dakota (2WD)..
  • CONTENTS: (2x) T6 Billet Aluminum Front Strut Spacers, (2x) High-Strength Steel Rear Lift Blocks, (4x) Round Bend U-Bolts, Installation Hardware,....
  • TECHNICAL NOTES: 3 inch front and 2 inch rear suspension lift. Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer....
  • INSTALLATION: Easy bolt-on installation takes 3 to 6 hours without the need for special tools. *An alignment is always recommended if you are altering....
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires..
Check Stock

Supreme Suspensions - Full Lift Kit for 1987-2004 Dodge Dakota Adjustable 1 to 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Square Bend U-Bolts 4WD

  • COMPATIBLE WITH 1987 - 2004 Dodge Dakota. *Only fits AWD models with 8.25" rear axle..
  • CONTENTS: (2x) Front Lift Torsion Keys, (2x) Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, Installation Hardware, Installation Instructions,....
  • TECHNICAL NOTES: Adjustable 1 to 3 inch front and 2 inch rear suspension lift..
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours. A torsion bar puller, or 5 ton gear puller is required for install. An alignment is always....
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our front MAX-Torsion....
Check Stock

TORCH 8.5\ Square Extended U Bolts Extra Long 2.5\ wide 9/16\ Ubolt w Hardware

  • FITS: Many applications. Please message us with your make/model and current U bolt size if you have any questions about fitment..
  • CONTENTS: 4x Square U-Bolts (measurements are from inside the bend 8.5" long and 2.5" wide).
  • INSTALLATION: Bolt on kit. U bolts are 8.5" from the inside bend and just over 9" in overall length..
  • Ships Same/Next Business Day. 2-4 Day Delivery. Lifetime Warranty. Dedicated Customer Service. Call or message us with any questions!.
  • NOTES: Please measure your existing U bolts before purchasing to ensure these U bolts are correct for your application. Please message us if you have any questions..
Check Stock

HYS VHF Marine Antenna Low-Profile 156-163Mhz Antennas W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable with PL259

  • Marine Antenna VHF 156-163MHz, 2 dBi signal with up to 50W of power.
  • W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable With PL259.
  • VHF Rubber Antenna Designed for any 156-163MHz device for receivers, 156-163MHz antenna for 156-163MHz device receivers to improve signal in receiving and transmitting..
  • Stainless Steel L-bracket&U-bolts, it comes with U-bolts which can be used with the attached plate for pole mounting..
  • The antenna does not come with mast pole mount.
  • it comes with TWO U-bolt which can be used with the attached plate for pole mounting..
  • Comes with mount and screws, easy to carry and install, the body of the VHF Marine Antenna makes it highly resilient to your Boat, Yacht etc use..
  • HYS VHF Marine Antenna made of high quality rubber with cable and clip, it will help you get longer communication range..
Check Stock

Supreme Suspensions - Full Lift Kit for 1987-2004 Dodge Dakota 4WD Adjustable 1 to 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Square Bend U-Bolts + Torsion Bar Unloading Tool

  • COMPATIBLE WITH 1987 - 2004 Dodge Dakota. *Only fits AWD models with 8.25" rear axle..
  • CONTENTS: (2x) High-Strength Steel Front Lift Torsion Keys, (2x) T6 Billet Aluminum Rear Lift Blocks, (4x) Square Bend U-Bolts, (1x) Torsion Bar....
  • TECHNICAL NOTES: Adjustable 1 to 3 inch front and 2 inch rear suspension lift..
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours without the need for special tools. An alignment is recommended after install..
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires..
Check Stock

Supreme Suspensions - Full Lift Kit for 1987-2004 Dodge Dakota Adjustable 1 to 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Square Bend U-Bolts + Axle Alignment Shims 4WD

  • COMPATIBLE WITH 1987 - 2004 Dodge Dakota. *Only fits AWD models with 8.25" rear axle..
  • CONTENTS: (2x) Front Lift Torsion Keys, (2x) Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, (2x) Axle Alignment Shims, Installation Hardware,....
  • TECHNICAL NOTES: Adjustable 1 to 3 inch front and 2 inch rear suspension lift..
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours. A torsion bar puller, or 5 ton gear puller is required for install. An alignment is always....
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our front MAX-Torsion....
Check Stock

Square U Bolt in Zinc 3/8 x 3 x 7 U Bolt Zn Industrial and Scientific Supplies U Bolts for Boat Trailer Tube Rectangular Wood and Metal Objects 4 Pieces

  • Common Size: the square U bolts measures about 3/8 inch in diameter, 3 inch in width and 7 inch in length, proper for 3 x 3 inch square, suitable size can meet your different fastening needs, please check the size before ordering.
  • Sufficient Quantity: you will receive 4 pack of square U bolts in zinc, including 4 pieces of u bolts, 4 pieces of frame plates and 8 pieces of nuts.
  • Enough quantity satisfy your uses and replacements.
  • Hard Material: the square U bolt adopts carbon steel material, and with zinc plated, sturdy and reliable, with nice rust and corrosion resistance, each bolt can withstand the weight, still perform well in rainy and wet environments.
  • Wide Applications: the U bolts are widely suitable for various fields, such as industry, manufacturing, maintenance, the automotive sector, clothing production, etc., ideal for fastening tubes, woods, trailer, and so on.
  • Tips: It is recommended to use lubricant during installing the U bolts to prevent wear and tear.
  • Use a manual wrench or socket ratchet when installing nuts.
  • Do not use high speed power tools or impact tools to tighten the nuts.
Check Stock

4 Sets 304 Stainless Steel Square U-Bolt Boat Trailer U-Bolts with Washers and Nuts L Heavy Duty U Bolts for Sailboat Trailer Automobiles Trailer Industrial Parts 1/2 D x 3 1/16 W x 4 5/16 Inch

  • Package includes: stainless steel u-bolt set include 4 pieces u-bolts, 8 pieces stainless steel flat washers, 8 pieces stainless steel nylon lock nuts, 8 pieces lock washers, all accessories are made of 304 stainless steel.
  • U-bolt size: 1/2 x 3-1/16 x 4-5/16 inch (D x W x L), thread length: 2-1/2 inches, suitable for 3 x 3 inch square beams and shafts.
  • Stainless steel material: u bolts for boat trailer are made of 304 stainless steel, strong and long-lasting.
  • These 304 stainless bolts prevent rust corrosion, acid corrosion and wear.
  • It's still perform well in rainy and humid seaside environment.
  • How to use: firstly choose the corresponding square U shaped bolt according to the size of the pipe, then drill holes in the connection, and finally lock nut and flat washer.
  • Use a hand wrench or socket ratchet when installing nuts.
  • Do not use an impact or a high speed socket driver.
  • Wide application: square u-bolt is applied to fix or connect the locked parts to rectangular wood and metal objects, such as cars, sailboat trailers, pipe, tube, plumbing and other industrial applications.
Check Stock

Prime-Line 9071931 U-Bolts, Round Bend, 1/4 inch-20 X 1-1/8 inch X 2-1/4 inch - (3/4 inch Pipe), Zinc Plated Steel, (10-pack)

  • STOP: ONLY USE a Hand Socket Ratchet or wrench to run the nuts up and tighten..
  • DO NOT USE an impact or powered socket driver. Ignoring this instruction will cause U-Bolt Galling / Seizing / Breaking / Failure / Expletives / Sawzall. Let's keep it Fun, and Successful..
  • U-Bolt Size: 1/2" Diam x 3- 1/16" Inside Width x 5- 5/16" Inside Height (Length).
  • Attention: When measuring for Your needed Height (Length), add 1" for the nut and washer..
  • Threading: 1/2"-13 with a thread length of 2- 1/2"..
  • U-Bolts and hardware are made out of 304 Stainless Steel..
  • These U-Bolts will fit on 3" x 3" cross members, such as 3" x 3" box steel..
Check Stock

Upper Bounce Trampoline Safety Enclosure Set of Net, 8 Poles & Hardware, Fits 13 FT. Round Frame - Installs Inside Frame

  • Included in the Set: This Upper Bounce trampoline safety enclosure set includes safety enclosure net, 8 heavy duty upper and lower trampoline poles, trampoline pole foam sleeves for poles, 8 trampoline pole caps and 16 u-bolts (2 U-bolts for each pole)..
  • Net for Trampoline: The trampoline net included in this set installs inside the frame. It is compatible with 13ft round trampolines from any brand out there. This trampoline net is tested for its safety and durability to ensure maximum protection..
  • Trampoline Net Poles: This trampoline safety enclosure set comes with 8 heavy duty tarmpoline poles. the trampoline net poles are made from high quality stainless steel which protects the trampoline poles from all types of outdoor weather conditions..
  • Pole Foam Sleeves and Pole Caps: The pole foam sleeves included in this set will protect your kids from getting hurt in case they bump into trampoline poles while jumping. This set also includes trampoline pole caps to cover the top edges of the poles..
  • U-Bolts: A set of 16 U-bolts is provided with this trampoline safety enclosure set. these bolts are used to attach the trampoline poles with the trampoline frame. Each of the trampoline poles uses 2 U-bolts to hold the trampoline poles firmly in place..
Check Stock

Armored Personnel Carrier

  • Tire Fit: This U-bolt type spare tire bracket is suitable for trailer-fitted trailer frames up to 2 inches or 3-4/5 inches wide (up to 4 inches) and can accommodate 15-inch tires. For 4 or 5 lug wheels (bolt style: 4 to 4 or 5 to 4 -1/2).
  • Easy to install: This spare tire mount can be easily installed to secure the tire. Just put the bolt in the trailer's throat and tighten it. The spare tire is installed on the side of the trailer protector..
  • Upgrade double nut design: Prevent the nut from falling off, and don't worry about losing the tire on the road..
  • Durable and rustproof：Our U-bolt trailer spare tire mount is made of thick steel. Can resist deformation. Galvanizing can increase protection against harsh weather conditions.
  • Package：Provide U bolt and 4 lug nuts are supplied.
Check Stock

(4) Hot Dipped Galvanized Dipped Square U-Bolts (1/2\ D x 2 1/16\ W x 6 5/16\ L) for Boat Trailer

  • U-bolt Size: 1/2" D x 2-1/16" W x 6-5/16 L, thread length: 2-1/2" inches, suitable for 2" x 2" square beams and shafts, (order Please check the measurement size carefully before).
  • Hot Dipped Galvanized : U-bolts are made of Hot Dipped Galvanized，The white surface is a thick galvanized layer, which enhances the rust and corrosion resistance of the U-bolt..
  • You can get: (4) U-bolts, (8) hexagon nuts, (8) flat washers, (8) lock washers, these additional accessories are also Hot Dipped Galvanized. With these, you can spend less time repairing and more time boating.
  • Tips:Use a hand wrench or socket ratchet when installing the nut. Do not use high-speed power tools or impact tools to tighten the nuts..
  • After-sales service: Our U-bolts provide a one-year warranty service. Please rest assured, if you have any questions, please feel free to send us an email via Amazon. We will solve it for you within 24 hours..
Check Stock

GAsupply 15mm 5x114.3mm Wheel Spacers, 5 Lug Forged Hubcentric 5x4.5 Wheel Spacers 64.1mm Hub Bore with 12x1.5 Studs, Fit for Civic CR-V Element Acura CL ILX RSX TLX TSX MDX (4pcs)

  • 【FITMENT】Please check before ordering. Only Fits for 5x4.5 to 5x4.5 Bolt Pattern, a center bore not larger than 64.1mm, and M12x1.5 wheel studs..
  • 【BENEFITS】Increased tyre clearance, solves brake caliper clearance problems, can be installed lifting kit and higher and larger tires/hubs.
  • 【FEATURES】 The 5x114.3 wheel spacers are CNC machined from 6061-T6 aluminum billet and pre-installed with 10.9 grade bolts, Stronger and lighter..
  • 【SPECIFICATIONS】 Bolt Pattern: 5x4.5” to 5x4.5”.
  • Quantity: Set of 4 Hubcentric Wheel spacers 5x4.5.
  • 【NOTE】 Please check the clearance of the fender. For vehicles without lift kit, the thickness of the 15mm wheel spacer adapter should be less than the fender clearance. If you have any questions, please feel free to contact us. We offer a lifetime guarantee.
Check Stock