Categories

Best Low pressure Cylinders

uxcell UN Radial Shaft Seal 20mm ID x 26mm OD x 5mm Width PU Oil Seal, Blue Pack of 10

  • [Size] - 20mmx26mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
  • [Operation Range] - Working Speed: Less than 0.5m/s.
  • Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
  • [PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
  • [Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
  • [Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.
Check Stock

uxcell UHS Radial Shaft Seal 12mm ID x 20mm OD x 5mm Width PU Oil Seal, Blue Pack of 10

  • [Size] - 12mmx20mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
  • [Operation Range] - Working Speed: Less than 0.5m/s.
  • Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
  • [PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
  • [Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
  • [Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.
Check Stock

uxcell UN Radial Shaft Seal 12mm ID x 22mm OD x 5mm Width PU Oil Seal, Blue Pack of 5

  • [Size] - 12mmx22mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
  • [Operation Range] - Working Speed: Less than 0.5m/s.
  • Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
  • [PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
  • [Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
  • [Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.
Check Stock

uxcell UHS Radial Shaft Seal 20mm ID x 28mm OD x 5mm Width PU Oil Seal, Blue Pack of 2

  • [Size] - 20mmx28mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
  • [Operation Range] - Working Speed: Less than 0.5m/s.
  • Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
  • [PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
  • [Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
  • [Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.
Check Stock

Owfeel M18x1.5 DIN Valve Scuba Adapter with Gauge, Pcp Scuba Tank Valve 4500psi Working Pressure with 22-inch-Long Black Hose for Air Tank, PCP Air Rifle, Paintball, and HPA Tank (M18x1.5 Threads)

  • High Pressure Resistance - It could resist working pressure up to 20-30 Mpa / 200-300 Bar / 3000-4500 PSI, with a gauge to indicate the pressure..
  • Two Types of Threads - One-piece DIN valve has two types of external thread. Sizes: M18x1.5 & 5/8-18UNF. Please check your tank thread before purchasingif you do not know,please contact us..
  • Dual Gauge Design - one gauge indicate tank pressure,the other gauge indicate the inline pressure. WIth 57 cm long stainless steel spring protection hose..
  • Easy Installation and Quick Release - It comes with an 8mm female quick-release coupling plug, and it could be connected and released from other male fittings within seconds..
  • Strong Compatibility - Mainly used for high-pressure gas cylinders, SCBA gas cylinders, SCUBA diving cylinders or PCP gas cylinders, easy to assemble and install, for air/carbon dioxide filling..
Check Stock

uxcell UHS Radial Shaft Seal 11.2mm ID x 19.2mm OD x 5mm Width PU Oil Seal, Blue Pack of 5

  • [Size] - 11.2mmx19.2mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
  • [Operation Range] - Working Speed: Less than 0.5m/s.
  • Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
  • [PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
  • [Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
  • [Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.
Check Stock

ABN Brake Cylinder Hone – 1-1/8in 3 Stone Piston Honing Tool Cylinder Bore Hone with 3/4in to 2-1/2in Honing Range

  • ...SIER: Remove carbon, rust, and heat glaze deposits from your caliper and piston cylinder walls with the ABN | 1-1/8 Inch Cylinder Bore Honing Tool Small Engine Cylinder Hone Kit.
  • Compatible with your electric drills, simply lubricate with brake fluid and run at low speeds moving up and down the sides of your engine cylinders.
  • BUILT TO LAST: Constructed of premium metal materials provide this brake caliper hone tool with maximum strength, durability, and longevity.
  • The flexible shaft and spread-control tension nut allow faster cutting and maneuverability.
  • 3 stone design makes insertion easy by self-centering.
  • Stone sleeves add strength and protect your abrasive stones when not in use.
  • PERFECT SIZE FOR YOUR NEEDS: Rigid honing tools for a drill features 3 carbide stones that help you remove glaze build up on your brake cylinders.
  • 220 medium grit stones measure at 1-1/8 by 3/16 by 1/8 inches (2.8 by .5 by .3cm).
  • Square ends of stones make this small brake hone tool ideal for step-cut and blind-end cylinders.
  • ADJUSTABLE RANGE: Easily adjust the range and pressure placed against your cylinders for well-controlled tension and maximum effectiveness in creating a smoother, cleaner surface.
  • Spring and knurled adjusting nut increase tension and lock the drill hon....
Check Stock

Empire Paintball Basics 68/4500 High Pressure Carbon Fiber Compressed Air Tank

  • Lightweight DOT & TC certified carbon fiber cylinders Made in the USA.
  • Utilizing Pure Energy technology regulators that lead the industry in flow, stable pressure output and efficiency.
  • Both high and low pressure rupture disks installed for the highest level of safety.
  • All components meet or exceed all ASTM, DOT, TC or CGA standards or requirements.
Check Stock

Tippmann Hand Chronograph

  • ... AL6061 aluminum alloy liner with full-wrapped carbon fiber and glass fiber winding, external surface treatment is epoxy coated, high strength features creep resistance, shock resistance and corrosion resistance..
  • Product Testing Performance: One of the safety tests is the hydrostatic test pressure, for carbon fiber cylinders, it can reach 50Mpa. The other is the minimum burst pressure, which can reach 102Mpa for carbon fiber cylinders, can hold more gas under the same volume conditions..
  • Product Advantage: Carbon fiber composite air cylinder is a new material cylinder developed in recent years. Compared with the traditional steel cylinders, the weight is reduced by 70%, the corrosion resistance is strong, there is no magnetic property, the performance is stable, and the inner surface is specially treated to ensure that the holding gas is clean and has no odor, long service life (The service life is 15 years)..
  • Product Application: Loading gas, Emergency escape, Fire breathing, Underwater breathing, Lifesaving of ships, Clean energy, Snorkeling diving breathing, PCP rifle and Paintball filling, Medical care and Mine emergency etc. Widely for fire-fighting, chemical industry, shipping, laboratory, mine, pertroleum, warehouse, factory and metallurgy, it c....
Check Stock

VICTOR Heavy Duty Acetylene Model: 350-15-510 - Delivery Rate: 2-15 psi - CGA-510 - Full Brass - Genuine Victor

  • This Genuine Victor Heavy Duty, Size 350 Regulators are durable and made to resist an intensive workload. Manufactured in Thick Heavy Brass, No plastics, No painted thin metal sheets..
  • 2-1/2" Easy to read Big Gauges - Oxygen Delivery Pressure: 5-125 psi. - Acetylene Delivery Pressure: 2-15 psi.
  • Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders. - Acetylene Tank Connector: CGA-510 Fits all Acetylene and Propane Cylinders EXCEPT Sizes MC and B Acetylene Cylinders,.
  • PLEASE carefully check the picture with the incompatible tanks, This acetylene regulator WILL NOT FIT size MC and B acetylene tanks***.
  • Delivery hose connectors, Oxygen: 9/16" - 18 (RH Male) and Acetylene/Propane: 9/16" - 18 (LH Male).
Check Stock

8milelake Engine Cylinder Hone Deglazer 2 inches-7 inches Adjustable 3 inches Blade with 220 Grit Stones Piston Cylinder Hone

  • This Engine Cylinder Hone Deglazer is use to to deglaze the walls of cylinders in gasoline and diesel engines, help to remove the carbon, rust..
  • Constructed of premium steel and provide this Piston Honing Tool a good strength and durability, and the 220 grit stones are replaceable , easy to use....
  • It use for deglazing engine cylinders 2 inches to 7inches in diameter, with 3 pieces adjustable 3” stones. and fit for engine cylinders of....
  • Knurled wheel adjusts spring pressure of stones against cylinder bore, and fasten the screw down can add more spring pressure, turn the opposite to....
Check Stock

VICTOR Heavy Duty Oxygen Regulator Model: 350-125-540 - Delivery Rate: 5-125 psi - CGA-540 - Full Brass - Genuine Victor

  • This Genuine Victor Heavy Duty, Size 350 Regulators are durable and made to resist an intensive workload. Manufactured in Thick Heavy Brass, No plastics, No painted thin metal sheets..
  • 2-1/2" Easy to read Big Gauges - Oxygen Delivery Pressure: 5-125 psi. - Acetylene Delivery Pressure: 2-15 psi.
  • Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders. - Acetylene Tank Connector: CGA-510 Fits all Acetylene and Propane Cylinders EXCEPT Sizes MC and B Acetylene Cylinders,.
  • ***PLEASE carefully check the picture with the incompatible tanks, This acetylene regulator WILL NOT FIT size MC and B acetylene tanks***.
  • Delivery hose connectors, Oxygen: 9/16" - 18 (RH Male) and Acetylene/Propane: 9/16" - 18 (LH Male).
Check Stock

TUXING 2L 4500psi Carbon Fiber Air Tank（Empty Bottle）& Paintball Fill Station with Valve Regulator Gauge for PCP Game

  • Product Specification: 2L / 20 CF capacity, 30mpa / 4500psi service pressure, CE certified （Not DOT certified）, M18x1.5 screw thread size, integrated air filling system with regulator gauge hose fittings for input and output by quick disconnect..
  • Product Structure: Using high-quality raw material AL6061 aluminum alloy liner with full-wrapped carbon fiber and glass fiber winding, external surface treatment is epoxy coated, high strength features creep resistance, shock resistance and corrosion resistance..
  • Product Testing Performance: One of the safety tests is the hydrostatic test pressure, for carbon fiber cylinders, it can reach 50Mpa. The other is the minimum burst pressure, which can reach 102Mpa for carbon fiber cylinders, can hold more gas under the same volume conditions..
  • Product Advantage: Carbon fiber composite air cylinder is a new material cylinder developed in recent years. Compared with the traditional steel cylinders, the weight is reduced by 70%, the corrosion resistance is strong, there is no magnetic property, the performance is stable, and the inner surface is specially treated to ensure that the holding gas is clean and has no odor, long service life (The service life is 15 years)..
Check Stock