Best Low temperature Lubricants

Hydraulic Welded Bottle Jack 50T(110,231lbs) Capacity for Auto Repair and House Lift, Red

• ... 【SUFFICIENT LIFTIING HEIGHT】In addition to the height of the jack body (10.23in), the piston rod (5.9in) and screw rod (2.36in) can be raised to increase the stroke, so that the jack can be lifted higher (up to 18.5in) to a wider range of uses..
• 【HIGH/LOW-TEMPERATURE RESISTANCE】The hydraulic system uses high-quality lubricants for better corrosion resistance and high/low-temperature flexibility allowing it to operate at temperatures between -4°F and 113°F..
• 【COMPACT AND PORTABLE】Its compact size is suitable for narrow and low working spaces, and can be easily carried in the trunk of a vehicle. In addition, the bottle jack has a handle that makes it easy to move and carry to any location. .
• 【HIGH SAFETY】The bottle jack is equipped with a safety valve that can automatically protect the hydraulic system in case of overload to prevent damage to the jack. At the same time, the height-limiting device prevents over-pumping and gives you safety assurance. The bottle jack uses a rubber oil plug with a seal inside, which ensures a good seal against oil leakage..

Polypropylene 55 Gallon Lever Action Drum Pump, Flow Rate Adjustable Drum Pump for Various Viscosities, Telescopic Suction Tube Fits 15 to 55 Gallon Drums

• [ TELESCOPIC ] Extendable Suction Tube 24 inch to 36-inch with 1.5-inch opening sure to fit into most Drum Barrels - No Electricity Required: Utilizes siphon action to transfer liquids by a simple grip and pump.
• [ ADJUSTABLE FLOW RATES ] Low Flow: 1, Flow Rate of Up to 270ml (9oz.) Per Stroke with Lubricants or liquids under 35-cst | Medium Flow: 2, Flow Rate of up to 350 ml (12oz.) Per Stroke with Antifreeze, Alcohols, Water, water based chemicals, Low Viscosity Lubricants | High Flow: 3, Flow Rate of up to 430 ml (15oz.) per Stroke with Diesel, Kerosene, Petroleum based no corrosive liquids to up 100-cst.
• [ RECOMMENED LIQUIDS ] Kerosene, Diesel, Antifreeze, Lubricants & more - Useful in the garage, shop, yard, farm, dock, snow or campsite.
• [ FITS ] For use with 50 - 205-Liters Drum Barrels or 15 to 55 Gallon Drums - Dual bung adaptor for use on drums with 1-1/2 inch & 2 inch openings.
• [ DURABLE ] Polypropylene body, handle & outlet spout and backed by a 1 year manufacturer warranty - Polypropylene Material designed to handle various types of petroleum-based noncorrosive liquids.

EAI Oil Seal Compatible for Honda OEM# 91203-KCY-671

• !!SAME BUSINESS DAY SHIPPING!! SUPERIOR QUALITY and DURABILITY: EAI Automotive Oil Seals are engineered with sturdy Carbon Steel Spring and high strength Nitrile Rubber for reliable and long-lasting performance. The rubber cover seal is lightweight and not easy to age..
• SEAL OFF LEAKAGE and DIRT: No more getting stressed up by spills from your rotary elements! Crafted with Nitrile Rubber, Garter Spring and Carbon Steel Case, this oil seal effectively prevents the leakage of lubricants and prevents the entry of dust and dirt into your precious machine..
• OEM# : 91203KCY671. The perfect Automotive Oil seal for your HONDA Vehicle.
• HIGH-TEMPERATURE RESISTANCE: With its 70A Nitrile Butadiene Rubber cover material design, this spring loaded metric rotary shaft will withstand temperatures from -40℉ to 226℉.
• HYDROCARBON FLUIDS: Engineered for the hydrocarbon fluids sealing environment, this oil seal boosts a good resistance to grease, mineral oil, hydraulic fluids, and petroleum oil. What more, this seal has low swelling in water, ensuring long term use..

MICROLUBROL 2 oz Tungsten DISULFIDE Sulfide WS2 Powder Ultra FINE ½ Micron 0.5 µ

• ULTRA FINE GRADE 0.5 micrometer (micron, µm) average particle size. The finest grade for lubrication.
• Can be coated on a surface by buffing, spraying or tumbling..
• Compatible with ALL metals, ALL plastics and elastomers, water, solvents, fuels, oils, paints, plastic resins..
• Lowest coefficient of friction of any of the commonly used dry lubricants including molybdenum disulfide, graphite and hexagonal boron nitride..
• Temperature use range superior to molybdenum disulfide and to other dry lubricants: from -450ºF (-270ºC) to 1200ºF (650ºC) in air..

MICROLUBROL 1 oz Tungsten DISULFIDE Sulfide WS2 Powder Ultra FINE ½ Micron 0.5 µ

• ULTRA FINE GRADE 0.5 micrometer (micron, µm) average particle size. The finest grade for lubrication.
• Can be coated on a surface by buffing, spraying or tumbling..
• Compatible with ALL metals, ALL plastics and elastomers, water, solvents, fuels, oils, paints, plastic resins..
• Lowest coefficient of friction of any of the commonly used dry lubricants including molybdenum disulfide, graphite and hexagonal boron nitride..
• Temperature use range superior to molybdenum disulfide and to other dry lubricants: from -450ºF (-270ºC) to 1200ºF (650ºC) in air..

uxcell Pneumatic Tubing, 4mm OD x 2mm ID Air Brake Tubing Nylon Air Line Tube 5m Clear

• Advantage: Nylon PA6 is strong, lightweight and has a very low moisture absorption rate compared to other nylon,it will remain more flexible, which in turn extends its service life..
• Material: Nylon Tubing made in Nylon PA6, It always can maintain good resistance to penetration and impact resistance at low temperatures of -40 Celsius Degrees.2.6Mpa working pressure.
• Feature: Pneumatic Tube Measures 0.08-inches inside diameter by 0.16-inches outside diameter by 16.4-feet total length. thin tube wall providing higher flow rates and working pressure.
• Please Note : Nylon tubes has hardness. You can use hot water or a hot air gun to soften tube or change to the tube shape you want..
• Application: Nylon tube widely use in: air, water, chemicals, lubricants, instrument lines, irrigation control systems,textile mills, vacuum systems,oscillation insulator and other industries..

EAI Balance Shaft Oil Seal Compatible for Mitsubishi OEM# MD009038 | MD050605 | MD069948 | NJ255

• !!SAME BUSINESS DAY SHIPPING!! SUPERIOR QUALITY and DURABILITY: EAI Automotive Oil Seals are engineered with sturdy Carbon Steel Spring and high strength Nitrile Rubber for reliable and long-lasting performance. The rubber cover seal is lightweight and not easy to age..
• SEAL OFF LEAKAGE and DIRT: No more getting stressed up by spills from your rotary elements! Crafted with Nitrile Rubber, Garter Spring and Carbon Steel Case, this oil seal effectively prevents the leakage of lubricants and prevents the entry of dust and dirt into your precious machine..
• OEM# : MD009038 | MD050605 | MD069948 | NJ255. The perfect Automotive Oil seal for your MITSUBISHI Vehicle.
• HIGH-TEMPERATURE RESISTANCE: With its 70A Nitrile Butadiene Rubber cover material design, this spring loaded metric rotary shaft will withstand temperatures from -40℉ to 226℉.
• HYDROCARBON FLUIDS: Engineered for the hydrocarbon fluids sealing environment, this oil seal boosts a good resistance to grease, mineral oil, hydraulic fluids, and petroleum oil. What more, this seal has low swelling in water, ensuring long term use..

Lucas Oil Red N Tacky Grease/10x1(3x3oz)

3M 08179 High Power Brake Cleaner - Low VOC - 14 oz

Lucas Oil 10153 Assembly Lube - 8oz.

Ingersoll Rand 38440228 Compressor Oil

• All Season Select lubricant is a synthetic, all-temperature blend designed to maintain optimal performance of any reciprocating compressor.
• Performs four times longer than petroleum-based lubricants.
• All Season Select reduces wear and prevents carbon build up.
• 1 Gallon All Season Select Synthetic compressor oil.
• Use to reduce the wear and tear on your compressor.

Ingersoll-Rand 38440236 All Season Select 5 L Bottle

• All Season Select lubricant is a synthetic, all-temperature blend designed to maintain optimal performance of any reciprocating compressor.
• Performs four times longer than petroleum-based lubricants.
• All Season Select reduces wear and prevents carbon build up.
• 1 Gallon All Season Select Synthetic compressor oil.

3/8 Electric Solenoid Valve 12-VDC VITON Gasket Air Gas Fuel Normally Closed

• -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
• Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
• This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
• This highly responsive valve will open and close in less than 1 second when actuated.
• meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
• PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.