Categories

Best Lp Gas Pipe Sealant

3 Embers ACC6000AF Natural Gas Conversion Kit Violet

  • Converts your 3 Embers dual fuel grill to natural gas.
  • Tools needed for installation not included: two adjustable wrenches, phillips screwdriver, pipe-thread sealant.
  • Converts these 3 Embers Grill Models - GAS7480AS & GAS7480BS.
  • Check grill owners Manual for conversion instructions.
Check Stock

only fire 12 Ft 3/4' ID Natural Gas Hose with Quick Connect/Disconnect Fittings for Grill,Generator,Patio Heater,Pizza Oven,etc

  • Hose Connection: 3/4" Male quick discount plug x 3/4" Male pipe swivel.
  • Quick Connector: 3/4" quick connect x 3/4" Female pipe thread.
  • 12FT gas hose , outside 100% solid brass and rubber fittings, long-lasting and sturdy. Provides secure, tight connection between grill or fire pit and tank.
  • Functions effectively with natural or liquid propane gas. Unites LP grills, natural gas grills and RVs to permanent fuel sources.
  • Use for high BTU output outdoor cooking appliances, construction heaters, and standby generators.
  • The male quick disconnect plug fits into quick disconnect adapter (3/4" quick connect x 3/4" female pipe thread). Automatically shut off the flow when pipe is removed, via the Quick disconnect adapter.
Check Stock

DOZYANT 15 Foot 3/4inch ID Natural Gas Hose with Quick Connect/Disconnect Fittings for Generator, Construction Heaters and More NG/Propane Appliance

  • 3/4" ID Natural Gas Hose Connector with a 3/4" Male QD Plug X 3/4" Male Pipe Swivel via Quick-connect Adapter.
  • Used to connect Natural Gas or Propane appliance to a permanent gas supply via quick disconnect.
  • Perfect for connecting your generator to natural and LP gas supply, also used for high BTU output outdoor cooking appliances, construction heaters, and standby generators.
  • The male quick disconnect plug fits into quick disconnect adapter (3/4" quick connect x 3/4" female pipe thread). It shuts off the flow when pipe is removed.
  • Quick disconnect hose assembly. Rubber hose and 100% solid brass fittings, well made and sturdy.
Check Stock

TOMEX Thread Seal Tapes,PTFE Pipe Sealant Tape,Teflon Thread Tape 1/2x520 Inch, Industrial Thread Sealants for Leak Water, Plumbers, Plumbing, Air Head, Thread Pipe(10 Rolls,White)

  • Package Includes: These tapes measuring 1/2 x 520 inches in size, totally 10 rolls pipe sealant tape, enough quantity for your different needs and also can be applied for a long time..
  • Good Quality: TOMEX Thread sealant tape is made of teflon with good density,4 times heavier than standard tapes,is suitable for most kinds of soft water pipes, Teflon tapes will not harden or crack anytime.
  • They have the good characteristics of corrosion resistance, anti-aging,helps prevent leaks on pipes and plumbing..
  • Widely apply: thread sealant tape is suitable for most kinds of soft water pipes, it is designed for home and piping applications.Working for both air and water , plastic and metal pipe fittings.good for gas, drinking water pipes and garden hose faucets ..
  • Simple & Efficient to Use: simply wrap the tape around the threaded male end of the pipe or connector and screw it in.
  • Less stickiness on the fingers and easy to remove.
  • Standard Grade: Standard quality for home, commercial and industrial piping applications. Fit all types of pipe threads for hundreds of applications..
Check Stock

Harvey 017065 Gas Line PTFE Thread Seal Tape

  • Yellow gas line thread seal tape with PTFE.
  • Extra heavy, full density PTFE tape especially for gas lines.
  • Recommended leakproof sealant for lines carrying natural gas, propane, butane.
  • and water, oil, and chemical installations.
  • Use on pipe, conduit, vales, bolts, anything with a thread.
Check Stock

Rustic State Industrial Pipe Wall Bracket Rust Oil Free 10 Inch Black Set of 2

  • PIPE Type: black pipe 3/4" x 5 feet, male (NPT) National Pipe thread taper made of superior rough coating steel for commercial and residential application.
  • PIPE SPECS: black coated schedule 40, 150 PSI.
  • PIPE FUNCTION: Used for indoor in low pressure plumbing applications such as water, oil, natural gas, LP, steam and air.
  • HIGH QUALITY: durable pipe steel materials manufactured using advanced technology.
  • RATING APPROVALS: meets ASTM standards and NSI technical specification.
  • EXTRA PROTECTION: shipped with plastic end caps to prevent pipe thread damage for the duration of transport.
  • DECORATIVE USES: pipes can be used for decorative purposes for industrial feel in room décor, furniture, shelves and accessories..
Check Stock

HAPPYTOPSTAR BBQ 03350 Spark Generator 5 Outlet AA Battery Push Button Ignitor Igniter for Amana Uniflame Surefire Charmglow Charbroil Centro Brinkmann BBQ Pro Bakers & Chefs Model Grills

  • Original Part Numbers: 3350, 03350, 80018343.Universal 1.5 volt ，Universal Gas Grill Replacement Heavy Duty BBQ Parts 1.5-Volt AA battery Spark....
  • Fits Surefire Models: SF34LP, SF892LP Tuscany Models: SH-CS812LP Uniflame Models: GBC1059WB, GBC1059WE-C, GBC850W, GBC850W-C, GBC850WNG-C, GBC940WIR,....
  • Fits Patio Range Models: CG7200LP, CG7200NG, CG8400NG Perfect Flame Models: PF30LP River Grill Models: GR1031-012965 Sams Club Models: 730-0691A....
  • Recommend you first measure the old pipe burners (length and diameter) and compare to the specs on this product listing..
Check Stock

Replacement for LG Kenmore Dryer LP Gas Conversion Kit 383EEL3002D AP5204371 PS3522300

  • Dryer LP conversion kit 383EEL3002D converts a natural gas dryer to operate on liquid propane.
  • The LP orifice in this kit replaces the natural gas orifice that is installed on the gas burner in the dryer.
  • Dryer LP conversion kit 383EEL3002D is an part that fits some gas dryers in these series: Kenmore 796.
  • LG 383EEL3002D Dryer LP Gas Converter. for use with the following LG Electronics models: DLGX5102V, DLGX5102W, RN1317AS, RN1317TS. LG 383EEL3002D Dryer LP Gas Converter. For use with the following LG Electronics models: DLGX5102V, DLGX5102W, RN1317AS, RN1317TS. Refer to your manual to ensure ordering the correct, compatible part.
  • Dryer LP conversion kit 383EEL3002D is an equipment manufacturer part that fits some gas dryers in these series: Kenmore 796.
  • and LG DLG and DLGX. Dryer LP conversion kit 383EEL3002D converts a natural gas dryer to operate on liquid propane. The LP orifice in this kit replaces the natural gas orifice that is installed on the gas burner in the dryer. A qualified technician should install this LP conversion kit because of the risk of explosion or fire if the kit is installed in.
Check Stock

SUNGATOR 12-Pack Air Hose Fittings 1/4 NPT to 3/8 Barb Hose Barb Adapter with Sealant Brass Pipe Fittings Male Threaded with 12 Pcs Hose Clamp

  • 【Upgraded Hose Barb Kit】 : 12 air hose adapters with sealant and 12 hose clamps.
  • 【Improved Threaded End】 : Coated the male end with select sealant to a snug fit for creating an air tight environment. You can be relieved from the preparation of the sealing tape..
  • 【 High-quality Hose Clamps】 : Stainless products can be rustproof. With the hose end applied a clamp, it can help bite and lock the pipe more tightly. They wont break easily and the flexible long belt can be adjusted to your pipe's size..
  • 【 Sturdy Material】 : Brass made, an abrasion resistant material for use in prevention and protection of fittings against corrosion,scratches,dulling and other damage after use. It is a perfect material for pipe fitting system as it can withstand up to 100 °C (212 °F) and long period of wear and tear..
  • 【Versitile Applications】 : Impotable water, gas, oil, fuel and air tools are preferable and they also work well in various pipes.
Check Stock

LASCO 17-4049 1/2-Inch Brass Flare Cap

  • Flare cap, for terminating/closing pipe end.
  • Not for use in potable drinking water applications.
  • Used for fuel, oil, air, liquid petroleum (LP) and natural gas lines connections.
Check Stock

LASCO 17-4075 15/16-Inch Brass Flare Cap

  • Flare cap, for terminating/closing pipe end.
  • Not for use in potable drinking water applications.
  • Used for fuel, oil, air, liquid petroleum (LP) and natural gas lines connections.
Check Stock

LASCO 17-4057 5/8-Inch Brass Flare Cap

  • Flare cap, for terminating/closing pipe end.
  • Not for use in potable drinking water applications.
  • Used for fuel, oil, air, liquid petroleum (LP) and natural gas lines connections.
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock