Categories

Best Ls Motor Rebuilds

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • ...g Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will ....
Check Stock

Full Engine Mount Adapter Plates Urethane Swap Kit Compatible with GMC Sonoma S15 Chevrolet Blazer S10 LSx LS1 LS2 LS- Conversion Motor Mounts+Frame Mount Adapter Plate

  • Full Engine Mount Adapter Plates Urethane Swap Kit Fit：1982-1990 GMC S15.
  • 1991-2004 GMC Sonoma(Compatible with 1983-2005 Chevrolet Blazer & S10 pickup 2WD 1983-2005 GMC Jimmy, S15 & Sonoma pickup 2WD)..Originally equipped with a 2.8l Chevrolet engine.see more detail in(Product description).
  • 1/4" laser cut steel multi position design for extreme durability..
  • Includes: (x8) flange head engine mount bolts,(x2)motor mount bolts, washers & Hex nuts ,(x2)1/4" laser cut motor mount adapter plates,(x2)2.8L Urethane Frame Mounts .As the picture shown..
  • Material：High quality steel constructions. Built to strict quality control standards. Instruction is not included..
  • Note: S10 LS Swap brackets allow installation of LS1 LS2 LS3 LS6 LSX LQ4 LQ9 4.8L 5.3L 6.0L 6.2L engine..
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check Stock

DeepCool Liquid Cooler LS720 360mm 4th Gen Dual-Chamber Pump 3100RPM 300w TDP AIO Cooler Anti-Leak Tech with Daisy-Chain Fans ARGB CPU Water Cooler Infinity Mirror for AMD AM4/AM5 LGA 1700/1200, Black

  • High-performance DeepCool LS720 CPU liquid cooler improved the 4th generation pump’s microchannel design to optimize coolant flow, the three-phase brushless motor up to 3100RPM combines thick pure copper plate maximizes overall cooling efficiency..
  • New structure dual-chamber pump brings the cool liquid into the cold plate chamber to cool the CPU first before circulating it through the motor chamber to cool the motor, which makes the motor more efficient dumping less heat into the loop..
  • LS720 CPU liquid cooler combines the 4th generation pump with high-density radiator and DeepCool FC120 fans to provide mighty 300w TDP efficient heat dissipation. Water tubes measure 410mm length with two tube clips for neat management in PC case.
  • LS Series liquid coolers equipped with DeepCool’s Anti-Leak patent technology, the pressure-relief device in the top of radiator vents inner air pressure caused by high temperature to block potential leaking accident after long-term use.
  • LS720 AIO cooler radiator measures 402*120*27 mm with 13 rows of fins and fin density about 24 fins per inch to realize the heat dissipation efficiently with three daisy chained 120mm DeepCool FC120 fans for better cable management.
Check Stock

DeepCool Liquid Cooler LS520 240mm 4th Gen Dual-Chamber Pump 3100RPM 280w TDP AIO Cooler Anti-Leak Tech with Daisy-Chain Fans ARGB CPU Water Cooler Infinity Mirror for AMD AM4/AM5 LGA 1700/1200, Black

  • High-performance DeepCool LS520 CPU liquid cooler improved the 4th generation pump’s microchannel design to optimize coolant flow, the three-phase brushless motor up to 3100RPM combines thick pure copper plate maximizes overall cooling efficiency..
  • New structure dual-chamber pump brings the cool liquid into the cold plate chamber to cool the CPU first before circulating it through the motor chamber to cool the motor, which makes the motor more efficient dumping less heat into the loop..
  • LS520 CPU liquid cooler combines the 4th generation pump with high-density radiator and DeepCool FC120 fans to provide mighty 280w TDP efficient heat dissipation. Water tubes measure 410mm length with two tube clips for neat management in PC case.
  • LS Series liquid coolers equipped with DeepCool’s Anti-Leak patent technology, the pressure-relief device in the top of radiator vents inner air pressure caused by high temperature to block potential leaking accident after long-term use.
  • LS520 AIO cooler radiator measures 282*120*27 mm with 13 rows of fins and fin density about 24 fins per inch to real....
Check Stock

LEGO Technic 42009 Mobile Crane MK II

  • 2 models in 1: rebuilds into a container stacker and truck. Includes 8882 LEGO Power Functions XL-Motor and 8881 LEGO Power Functions Battery Box.
  • Features LEGO Power Functions motor-powered extending outriggers, lowering feet, extending or raising crane arm and retractable winch.
  • Also includes a rotating superstructure, 8-wheel drive, 5 axles, 10 wheels and a detailed V8 motor with moving pistons.
  • Extend the crane arm over 30" into the air! Measures (with retracted crane arm and outriggers) over 8" high, 23" long and 5" wide.
  • Container stacker measures over 20" high with boom fully extended, 19" long and 7" wide. Container truck measures over 3" high, 11" long and 3" wide.
Check Stock

LEGO Technic 42030 Remote Controlled Volvo L350F Wheel Load

  • Remote-control replica of the powerful Volvo L350F wheel loader. 2-in-1 model: rebuilds into a Volvo A25F articulated hauler.
  • Features a detailed 6-cylinder Volvo-green engine with moving pistons and fan, articulated servo steering, working lift arm, and a tipping bucket.
  • Activate the double remote-controlled Power Functions motors for powerful, simultaneous driving and digging action - just like the real machine!.
  • Includes LEGO Power Functions components: servo motor, XL-motor, large motor, medium motor, battery box, 2 remote controls and 2 infrared receivers.
  • Volvo L350F (with bucket lowered) measures over 9" high, 22" long and 6" wide. Volvo A25F measures over 9" high, 19" long and 6" wide.
Check Stock

A-Premium 302-2 LS Swap Engine Oil Pan Kit Low Profile Compatible with 1964-1992 Chevy Nova Camaro Ventura Omega F-body G-body LS1 LS2 LS3 LS6 5.7L 5.3L 6.5L

  • ✅Compatible with LS Engine - LS1 LS6 LS2 LS3 LS9 4.8L 5.3L 5.7L 6.0L 6.2L Motor.
  • ✅Compatible with Chevrolet (Chevy) Camaro 1967-1969.
  • Compatible with Oldsmobile Omega 1968-1974.
  • Compatible with Pontiac Firebird 1967-1969.
  • ✅Part Number: 302-2,12558253, 12634547, 12628771, 12625031.
  • ✅This Oil Pan Kit not fits LS7 dry engines or “stroker” engines greater than 3.62”.
Check Stock

Top10 Racing Motor Mount Adapter Plate SBC Vehicle to LS Engine - Universal Swap Bracket Small Block LS Conversion Adjustable for LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 Billet

  • Function: These brackets allow for a LS series engine to be bolted into a vehicle that originally had a small block for chevy engine with your....
  • Fitment: For Chevy, including MOST 60’s and 70’s Chevrolet pickups and cars such as Camaro, Nova, Chevelle, and Impala among others. For LS1 LS3....
  • Package Includes:2PCS Swap Motor Mounts,Adapter Plates,8PCS Flat Head Bolts,6PCS Flange M10-1.5 Bolts (plates are M10 threaded, use the hardware....
  • Feature: Laser cut, water jetted, or plasma cut parts do not compare to the quality, precision and accuracy of a CNC milled product..
  • No Grinding Necessary for A Flush Fit: Our Swap motor mounts for LS have a necessary opening milled out of the center of the plate to clear the hump....
Check Stock

Engine Oil Pump Pickup Tube Compatible with 2004 2005 2006 LS1/LS2 Pontiac GTO #12572654

  • New GM OEM oil pump pickup tube. This is for GTO oil pans only..
  • Oil pump pickups are specific to the oil pan..
  • If you are swapping an LS motor, you need to order a pickup specific to the pan you are using..
  • 100% Brand New , reliability and durability. Kindly do not hesitate to contact us back in the future if you feel that you need further assistance..
Check Stock

Valve Cover Billet Valve Cover Oil Cap with Breather for LSX LS1 LS6 LS2 LS3 LS7

  • 【Compatible model】The hood oil cover is made of Aluminum Alloy & Gauze, resistant to corrosion and rust.This high-quality air vent with hood for cars is available for LSX LS1 / LS6 / LS2 / LS3 / LS7..
  • 【Protection】: 100% new aftermarket valve oil cover with ventilation holes to protect the engine from dust and impurities, improve engine performance..
  • 【High quality】 : The respirator consists of pretreated cotton / gauze filter elements that protect your motor and allow it to breathe freely..
  • 【Easy to install 】: Adopting the humanized design, the installation process is simple and convenient and can directly replace old or damaged parts, saving time and effort and more convenient use,perfect replacement for old or damaged ones..
  • 【Sales Service】We are very professional sellers and we Committed to create the best product service for each customer. If this product does not meet your expectations, please feel free to contact us, we will try the best to deal with till you satisfied..
Check Stock

Top10 Racing Throttle Position Idle Air Control Throttle Body Sensors TPS IAC Compatible with Chevy LS1 LS2 LS6 LSX LS7

  • It also work with other factory LS motor cable driven throttle bodies (4.8, 5.3, and 6.0), in addition to most aftermarket throttle bodies for LS....
  • 100% Brand New. All Necessary Hardware Included..
  • Vehicle Tested. Perfect Drop-In Fit. 1 Year Manufacturer Warranty.Note:If you have any question about our product,please contact us right away..
Check Stock

Camshaft Lifters Kit NON-MDS w/Head Gasket Cover Kit Compatible with Chrysler Jeep Dodge Charger Durango 5.7L Hemi 2009-2018 Part# 53021720BB 53021720AB AKWH

  • 【Reliable Quality】Tested to ensure that leak down and top end oil flow are within specification. Same size with OE parts, guides hold the lifters tight for working smoothly. It’s good insurance to make sure that you’re not going to have lifter issues cam load issues later on especially if it’s motor pushing high horsepower..
  • 【Install Notes】Before install your lifters make sure to look at the general cleanliness of engine. Soak the lifters overnight in comps break-in oil this will give it really good lubrication on the outside fill up all the needle bearings and you’ll get rid of most of the air in the plunger assembly. Taking some simple precautions to keep that dirt and debris from getting into your oil system during installing..
Check Stock