Categories

Best Ls To Turbo 35adapter

Brian Tooley LS1 Rocker Arm Trunion Kit 4.8 5.3 5.7 6.0 6.2 Trunnion – No bolts

  • Brian Tooley LS Rocker Arm Upgrade Trunion Kit Doesn’t include upgraded bolts – stock bolts can be used..
  • These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
  • Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

Michigan Motorsports LS1 Rocker Arms and Bolts with Trunion Kit Installed FITS LS2 LS6 LQ4 LQ9 LM7 4.8 5.3 5.7 6.0

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor..
  • We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure..
  • LS1 style allen head bolts are included for installation. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.
  • This kit includes: 16 LS Series Rocker Arms 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearin....
Check Stock

Z Whip LS 1/8” NPT Oil Port for Turbo Oil Feed Line Auxiliary Oil Supply Billet Adapter Plate LS1 LSX LS2 LS3 Oil Pressure Sensor Oil Cooler Cover LQ4 LQ9 LS6 5.3L 5.7L 6.0L Proudly Made In The USA

  • Billet 1/8” NPT Oil Port Gives you a place to attach a turbo oil feed line or an aftermarket oil pressure sensor. (Basically, anything with a 1/8”-27 NPT thread).
  • COMPATIBLE WITH GEN 3 & 4 LS OIL PANS – Z WHIPs oil pressure sensor adapter kit is compatible with all Gen 3 & Gen 4 LS oil pans EXCEPT GTO front sump and LS4 oil pans. LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4.
  • We are an AS9100D and ISO 9001:2015 Certified Manufacturer. Parts we produce fly at 30,000 feet where failure is not an option..
  • Proudly made in the USA from Aerospace Grade Billet Aluminum.
  • When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve.
Check Stock

LNKA Foot Control Pedal & Cord J00360051 Compatible with Brother LS2125i 1034D Serger,1034DX Serger,1034DAV Serger,10443,1134D,1134DW

  • J00360051 Foot Controller Pedal with Cord for Brother Serger Models:1034D Serger, 1034DX Serger, 1034DAV Serger.Brother 10443, 1134D, 1134DW, 150 Campus, 1634D, 1681, 1781, 2034D, 2340CV Serger, 3234DT, 268, 3034D, 3234D, 350, 360, 4234D, 4234DT Serger, 451, 461, 523N, 5234PRW Serger, 524N, 525N, 526, 526D, 546, 546D, 626D, 634D, 640D, 661, 681, 7029, 730DE, 741, 751, 760DE, 834DP, 920D, 925D, 929D, 934D, 935D, 1781 B373, BM2600, BM2700, BM2700AS, BM2800, BM2800CT, BM2800FG, BM3500.
  • For Brother Sewing Machine: BM3600, BM3700, BM3700CT, BM3700FG, BM3850, BM3850CT, BM3850FG, Comfort 10, Comfort 12, Comfort 15, Comfort 25A, Comfort 35A, CV3440, CV3550, DZ1234 Serger, DZ1500F, Galaxy 8015, GS2700, GS2786K Hello Kitty, GS3700, GS3710, GS3740C, Hanami 27S, Hanami 37S, Hanami37S, HQ17, HQ27, HQ33,J17, JS2130, JS23, JX1710, JX2517, L15, L25, L30, L35, L40, LS1217, LS1520, LS17, LS1717, LS1717B, LS1717P, LS1817, LS2000, LS2020, LS2020P, LS2125, LS2125B, LS2125i.
  • For Brother Sewing Machine:, LS2129, LS2130, LS2135, LS2150, LS2160, LS2220,LS2250PRW, LS2300PRW, LS2320, LS2350, LS2400, LS25, LS2720, LS2725, LS2820, LS2825, LS2920, LS30, LS3125, LS35, LS590, LX1700, LX2375, LX2500, LX2763, LX3125, LX3125E, LX3817A, LX3850, NX600, PC-15, PL1050, PS1000, PS1200, PS125....
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • ... pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..
Check Stock

NEW 3 BAR MAP SENSOR LS1 LS2 LS3 LS7

  • Plug and play adapter that will allow the installation of an LS3 MAP sensor in an LS2 or LS1 equipped vehicle..
  • Delphi Style MAP Sensor to a Bosch Style LS MAP Sensor.
  • Included components: MAP Sensor Adapters Harness (6 inch).
Check Stock

DNA Motoring GKT-A-2-DP-DNT-GPT-KIT Graphite Aluminum Gasket Plus Donut Studs Bolts Kit,Metallic

  • 1-3/4” and 1-7/8” tubing diameters available for increased exhaust flow increasing performance and improved throttle response.
  • CNC Mandrel-bent tubes provide consistent tubing diameters for smooth flow and increases the cylinder scavenging effect.
  • Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • Note: Headers are not equal length, due to the LS cylinder heads being offset approx 1 /2" from the factory Note: Headers do not utilize the factory....
  • Fitment:Ls Turbo Manifold Fits LS1, LS2, LS3, LS4, LS6, LSX 4.8L, 5.3L, 5.7L, 6.0L, 6.2L V8 engines 1997-2014.
Check Stock

Turbo Kit T70 Single T4 Silverado Sierra Turbocharger Vortec V8 LS 4.8 5.3 6.0

  • Turbo Kit T70 Single T4 Silverado Sierra Turbocharger Vortec V8 LS 4.8 5.3 6.0.
  • Cast passenger and driver side manifolds.
  • -4AN oil feed kit with adapter plate + Hardened stainless hardware.
Check Stock

T POWER 30v Ac Dc Adapter Charger Compatible with Bose Lifestyle 18 28 35 38 48 AV AV18 AV28 AV38 AV48 Life Style DVD Media Center Sound System Power Supply

  • T-Power (TM) Made with the highest quality (( Extra Long 6.6ft cable cord )) Total Cord Length Is Extended to 6.6 ft.
  • Input Voltage Range: AC 100V - 240V FITS: Bose DCS91 , DSC-101 294295-001.
  • Compatible : Lifestyle 18 LS18 28 AV28 LS28 35 LS35 38 LS38 48 LS48 V10 V20 V30 VS-2 VS2 V2 Video Enhancer DVD Home Entertainment System.
  • BOSE Lifestyle V20, V30, 18, 28, 35, 38, 48 AV V LS VS DCS-91 P/N: 256764-001 256764001 Life style DVD Media Center Universal.
  • ⚠️️THIS IS BARREL TIP CONNECTOR ❌ WILL NOT FIT : " 100PS for Lifestyle T10, T20, V25 & V35 ".
Check Stock

Brian Tooley BTR Trunnion Kit V2 Rocker Arm Trunion LS1 LS3 4.8 5.3 5.7 6.0 6.2

  • BTR Trunnion Kit V2 Rocker Arm Trunion Kit. The all new Trunnion Kit V2 features a Trunnion with pre-installed inner race bearings..
  • The V1 kits have stood up to an enormous amount of abuse, but BTR decided to upgrade the to a pressed inner race comprised of 52100 Heat Treated Bearing Steel, over the more commonly used 8620 Carburized Steel found in our V1 kits and many OEM applications..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • Additionally, these feature a self oiling axle with priority feeding to the Trunnion itself..
  • FOR LS1/LS3/99-13 LS TRUCK STYLE ROCKERS. Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

Michigan Motorsports GM Bosch Alternator Wire Harness Adapter Connector LS1 LS2 LS3 LQ4 LQ9 LM7

  • GM Bosch Alternator Wire Harness Adapter Connector LS1 LS2 LS3 LQ4 LQ9 LM7.
  • GM DR44G Bosch Alternator Adapter LS1 LS2 LS3 LM7 LQ4 LQ9 Plug and Play 6".
  • If you are upgrading your alternator to the DR44G alternator you will need this plug and play adapter. This will adapter your 4 way flat connector to the Bosch connector for the alternator. And the best thing is it is PLUG AND PLAY!.
  • This part generally fits Chevrolet, GMC vehicles and includes models such as Express 2500, Express 3500, Savana 2500, Savana 3500 with the trims of Base Cutaway Van 2-Door, Base Extended Cargo Van 3-Door, Base Standard Cargo Van 3-Door, Base Standard Cargo Van 4-Door, LS Extended Passenger Van 3-Door, LS Standard Passenger Van 3-Door, LS Standard Passenger Van 4-Door, LT Extended Passenger Van 3-Door, LT Standard Passenger Van 3-Door, LT Standard Passenger Van 4-Door,.
  • SL Extended Passenger Van 3-Door, SL Standard Passenger Van 3-Door, SL Standard Passenger Van 4-Door, SLE Extended Passenger Van 3-Door, SLE Standard Passenger Van 3-Door, SLE Standard Passenger Van 4-Door . The engine types may include 4.8L 294Cu. In. V8 FLEX OHV Naturally Aspirated, 6.0L 5967CC 364Cu. In. V8 FLEX OHV Naturally Aspirated. This part fits vehicles made in the following years 2010, 2011..
Check Stock

Xenon HID Ballast Headlight Control Module Unit Replacement for Toyota Prius Lexus KDLT003 DDLT003 Part# 8110730D31 85967-53040 85967-24010 85967-52020 NICEKE

  • Replace Denso / Koito Models: KDLT003 / DDLT003 | Bulb Type: D4S D4R 35W..
  • Part# 85967-51040, 81107-33761, 81107-12A80, 81107-47150, 8110747150, 81107-52680, 81107-30D30, 8110730D30, 8110730D31, 81107-30D31, 85967-24010,....
  • A failed headlight control module can mean your headlights don't come on or, in the case of adaptive headlights, they no longer adjust their aim....
Check Stock

Brian Tooley BTR Turbo LS Stage 1 Cam, Spring Kit with Titanium Retainers, Chromoly Pushrods and Install Gasket Kit LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2 (Camshaft, Spring Set and Gasket Kit)

  • Brian Tooley Turbo Stage I Cam includes Spring Kit, Pushrods and Install Gasket Kit.
  • Turbo Stage I Cam 222/227 .602"/.598" 113+3 and comes a 3 bolt timing gear pattern..
  • Includes 7.400" LS Chromoly Pushrods, BTR Platinum dual springs, Titanium Retainers, Spring Locators.
  • .505" ID, .060" Thick, LS Valve Seal Kit.
  • Set of 8 Black Intake Seals and 8 Brown Exhaust, LS VALVE LOCKS 7 DEGREE BEAD LOCK SET OF 32.
  • Includes CAM INSTALL GASKET KIT, Front Timing Cover Gasket, Timing Cover Damper, Seal Water Pump Gaskets, LS CRANKSHAFT DAMPER BOLT.
  • When the combination calls for something a little milder, the stage 1 is where to look. It will let a 4.8 turn 7k rpm with a 7675, and it works great in daily driver 6.0's with 68-72mm turbine wheel turbos that don’t see over 6200. A very well-mannered cam with a noticeable idle but nothing too crazy..
Check Stock