Categories

Best Lubrication Pumps

AMRJ-32903 Mayfair Cartridge Bilge Pump - 1000 GPH

  • Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
  • Lift a tab on the top, give the cartridge a twist, and pull it out.
  • that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
  • 12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
  • Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
  • 1000 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..
Check Stock

AMRJ-32503 Mayfair Cartridge Bilge Pump - 500 GPH

  • Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
  • Lift a tab on the top, give the cartridge a twist, and pull it out.
  • that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
  • 12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
  • Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
  • 500 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..
Check Stock

Garlock 29602-4110 Guardian Goulds 3196LTX Bearing Isolator, Bi-Directional, 1.875\ x 2.750\ x 0.700\ Outboard Side, Bronze

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Provides dust tight protection and heavy water jet spray (26gpm) for pumps. Tested to IP 66 Ingress protection based on IEEE test standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • Bronze construction does not rust and conforms to API 610 standard.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29502-4107 ISO-Gard Goulds 3196MTX Bearing Isolator, Bi-Directional, 1.750\ x 2.875\ x 0.750\ Inboard Side, Blue

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Protects pumps against water spray (3gpm) and dust. Tested to IP 55 Ingress protection based on IEEE standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • PTFE construction  with excellence chemical resistance.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29507-4106 ISO-Gard Goulds 3196STX Bearing Isolator, Bi-Directional, 0.875\ x 1.250\ x 0.625\ Outboard Side, Blue

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Protects pumps against water spray (3gpm) and dust. Tested to IP 55 Ingress protection based on IEEE standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • PTFE construction  with excellence chemical resistance.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29602-4124 Guardian Bearing Isolator, Durco Mark 3/Group 2, Bi-Directional, 1.875\ x 2.625\ x 0.700\ Inboard Side, Bronze

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Provides dust tight protection and heavy water jet spray (26gpm) for pumps. Tested to IP 66 Ingress protection based on IEEE test standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • Bronze construction does not rust and conforms to API 610 standard.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29699-0319 Guardian Bearing Isolator, Durco Mark 3/Group 3, Bi-Directional, 2.625\ x 3.677\ x 0.700\ Outboard Side, Bronze

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Provides dust tight protection and heavy water jet spray (26gpm) for pumps. Tested to IP 66 Ingress protection based on IEEE test standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • Bronze construction does not rust and conforms to API 610 standard.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29502-4125 ISO-Gard Bearing Isolator, Durco Mark 3/Group 3, Bi-Directional, 2.625\ x 3.677\ x 0.750\ Inboard Side, Blue

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Protects pumps against water spray (3gpm) and dust. Tested to IP 55 Ingress protection based on IEEE standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • PTFE construction  with excellence chemical resistance.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

2 Wheel Drive

  • EXTEND THE LIFE OF YOUR VEHICLE: zMAX Heavy Duty Application is simple and easy to use. Micro-lubrication soaks into metal surfaces which improves lubricity and reduces carbon deposit build-up while boosting performance and protecting vital vehicle parts..
  • ENGINE EFFICIENCY: Helps to restore the combustion valve and piston ring sealing resulting in a smoother running motor and more power. Helps to reduce engine wear and lower emissions on large engines, trucks, marine vessels and construction equipment.
  • FUEL CONDITIONER: Provides continuous lubrication on moving parts. It conditions the pumps and nozzles reducing carbon residue from the valves and pistons. Improving fuel efficiency and performance for large gas or diesel vehicles and engines..
  • TRUSTED BY PROFESSIONALS & DEALERSHIPS: Stock zMAX Micro-lubricant to treat your machinery like a professional. From local repair shop mechanics to major dealership groups, our multi-use eco-friendly formula is industry tested and mechanic trusted..
  • TRUSTED QUALITY AND PERFORMANCE - zMAX is proud to be the Official Micro-lubricant of Spee....
Check Stock

VP Racing Fuels 2837 Diesel Fuel Conditioner Case (144 fl. Oz)

  • 24oz. Treats up to 240 gallons (908 liters).
  • Increases cetane and replaces lost lubrication.
  • Reduces smoking while increasing fuel mileage.
Check Stock

Lubegard 77012 Fuel System Booster Cleaner - 16 oz.

  • Contains a unique proprietary polyether amine (PEA) detergent technology, the most effective chemistry for total fuel system clean-up that outperforms....
  • Proprietary FLA additive provides lubrication of fuel pumps and injectors.
  • Stabilizes fuel, especially during storage.
Check Stock

STA-BIL MARINE ETHANOL FUEL TREATMENT AND STABILIZER 8OZ 22239-57-1109

  • Product 1: Protects pressure washer pumps during storage.
  • Product 1: Protects pistons and seals from damage during storage for easy start ups.
  • Product 1: Can safely be drained from pressure washer when it is taken out of storage.
  • Product 1: Next generation anti-freeze & lubrication.
  • Product 2: Keeps fuel fresh for up to 24 months during storage.
  • Product 2: Eliminates the need to drain fuel prior to storage.
  • Product 2: Ensures quick, easy starts after storage.
  • Product 2: Prevents gum and varnish build-up.
Check Stock

Diesel Men's 57mm Mr. Daddy 2.0 Quartz Stainless Steel and Leather Chronograph Watch, Color: Gold, Black (Model: DZ7371)

  • EXTEND THE LIFE OF YOUR VEHICLE: zMAX Heavy Duty Application is simple and easy to use. Micro-lubrication soaks into metal surfaces which improves lubricity and reduces carbon deposit build-up while boosting performance and protecting vital vehicle parts..
  • ENGINE EFFICIENCY: Helps to restore the combustion valve and piston ring sealing resulting in a smoother running motor and more power. Helps to reduce engine wear and lower emissions on large engines, trucks, marine vessels and construction equipment.
  • FUEL CONDITIONER: Provides continuous lubrication on moving parts. It conditions the pumps and nozzles reducing carbon residue from the valves and pistons. Improving fuel efficiency and performance for large gas or diesel vehicles and engines..
  • TRUSTED BY PROFESSIONALS & DEALERSHIPS: Stock zMAX Micro-lubricant to treat your machinery like a professional. From local repair shop mechanics to major dealership groups, our multi-use eco-friendly formula is industry tested and mechanic trusted..
  • TRUSTED QUALITY AND PERFORMANCE - zMAX is proud to be the Official Micro-lubricant of Spee....
Check Stock