Categories

Best Luminescence Flash Board

KeeYees 3pcs ESP8266 ESP-12E Development Board WiFi WLAN Wireless Module CP2102 for NodeMCU for ESP-12E for Arduino

  • The controllers are easy to program by using the CP2102-USB interface without having to press the flash and reset buttons before each flash operation..
  • The development board has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board. Support smart link smart networking..
  • The fast and affordable technology for WiFi. Make your development the fastest way combined with firmware for NodeMcu..
  • Modern, state-of-the-art LUA technology. It is an integrated unit with all available resources on board. It's very easy for Arduino projects or any development board with I / O pins..
  • Modern Internet development tools can use the built-in API to instantly put your idea on the fast track..
Check Stock

ALITOVE 16.4ft 5050 Blue LED Flexible Strip Ribbon Light Black PCB DC 12V 5M 300 LEDs Waterproof IP65 for Home Garden Commercial Area Lighting, Without Power Supply

  • ...her brands. Never fall off. ( Heating the tape with heat gun or hair dryer will make it more sticky.).
  • 【Super Quality LED Strip】 300 pcs high-brightness 5050 blue LEDs are evenly embedded on the 5m(16.4ft) double-layer pure copper FPCB Board and give out beautiful blue light. High-density 60 LEDs/M design makes luminescence more even and natural. Low voltage 12V DC input, safe to use, touchable to children..
  • 【Flexible Design & Cut freely】 Using flexible copper circuit board, you can gently bend it to an arc. Please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack. The strip lights can be cut between every 3 LEDs along along the cutting marks to fit for your project, great for DIY..
  • 【Two different power input ends】One end has 2pin wire, you can screw it to the positive and negative terminals of 12V power supply. The other end has 5.5x2.1mm female DC connector. If your 12V power supply has 5.5x2.1mm male DC connector, just plug and work. The power supply is not included..
  • 【Indoor and Outdoor Use】The LED strip is coated with clear silicone, up to IP65 waterproof rate. It can be used to beautify both indoor and outdoor lighting scenes, such as backyard, deck, boat, living room, bedroom....
Check Stock

Teguangmei Turn Signal Light Bulbs, No Hyper Flash 1850Lumen 45SMD BAU15S 7507 PY21W Front Rear Turn Signal Bulb Canbus Error Free Led Turn Signal Lights Amber Yellow Pack of 2

  • Made with high quality 45SMD 3030 chips,360lighting angle,and LED chips have stable luminescence.1850 lumens per BA15S 1156 LED Bulb and 18W Per Bulb..
  • Only fit for 7507/12496/1156/BAU15S/PY21W(150) turn signal light.If not sure the size of turn signal light, just feel free to contact us before purchase.
  • Aluminum plate inside which has excellent heat dissipation, high quality aluminum alloy outside and 10pcs holes on the body speed up the cooling rate and durable..
  • Built in stable Constant Current IC Driver for Longer lifespan and adjust the current automatically,longer life spans than other canbus signal bulbs.Built in Canbus , Error free replacement and Anti Hyper Flash for turn signal light.
  • Package Include: 2pcs Amber 1156(BAU15S) 7507 45SMD turn signal Light Bulbs.
Check Stock

DMP Kawasaki Ninja 400 Z400 ZX6R ZX6 2018 2019 2020 Smoked Integrated LED Tail Light - 905-4159D

  • Each DMP Tail Light comes with an OEM factory style Brake Light harness connector, as well as optional wires (without connectors) for the turn signals..
  • Turn Signals ground through the common ground in OEM Brake Light connector, leaving only a single power wire for each side to be hooked up if signals are to be used. (Reference installation instructions)..
  • Formed to perfectly replicate OEM dimensions and are constructed with high quality polycarbonate for correct optical clarity. You will not find a better fitting or brighter aftermarket LED Tail Light..
  • The DMP LED Tail Lights provide the perfect solution for streamlining the appearance of your motorcycle by eliminating bulky turn signal housings, without sacrificing function..
  • Each LED board hosts a matrix of super high intensity LEDs that provide intense luminescence and excellent visibility in a variety of conditions. The interior of the tail light housing contains a topographically designed reflective surface to further amplify the intensity of the LEDs and increase overall visibility..
Check Stock

Pontoon Led Boat Lights, 12V 20FT Marine Led Strip Lights, Waterproof Boat Interior Light, Under Gunnel Lights, Boat Deck Light, Night Fishing Lights with and Extension Cable for Boat (Blue)

  • ...ht is an ideal gift for your friends or family on birthday, Christmas or party, especially for boat lovers..
  • 【Super Bright LED Strip】: 360 Pcs Super bright 5050 blue LEDs are evenly embedded on the 6m(20ft) double-layer pure copper FPCB Board and give out beautiful blue light. High-density 60 LEDs/M design makes luminescence more even and natural..
  • 【Flexible Design & Easy to Install】: The Lights Using flexible copper circuit board, you can gently bend it, Please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack. The strip lights can be cut between every 3 LEDs along the cutting marks to fit for your project, great for DIY. The light strip comes with strong 3M back adhesive, mounting clips to help keep the boat light strip stay in place..
  • 【Safe & Waterproof】: This LED strip light is fully covered with water-resistant glue. Waterproof rating is IP65, It can withstand the rainy and snowy weather and protect LED from damage, greatly extend the life of the strip lights to 50,000 hours or more. LED strip with operating voltage of 12V, low heat, no radiation, no flicker, harmless to the human eye, it can be touched by children..
  • 【Widely Application】: The lights are widely used for boat inte....
Check Stock

ESP8266 ESP-12E NodeMcu Lua WiFi Module Connector Development Board, for Arduino IDE Micropython

  • ESP8266 CP2102 NodeMCU ESP-12E WIFI serial wireless module is an open source Lua based firmware, ultra low cost WI-FI modules, development boards for rapid prototyping, integrated with ESP8266 WIFI chips..
  • Use interactive Lua scripts to write hardware code for Arduino, it offers a complete and self-contained Wi-Fi networking solution..
  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIO..
  • The NodeMCU ESP8266 development board programming model is similar to that of Node.js, more open source and interactive, programmable, simple, 4-layer PCB design, small size..
  • The has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board, without having to press the flash and reset buttons before each flash operation,simultaneity support smart link smart networking..
Check Stock

LED Boat Strip Lights, 40FT Marine Pontoon Led Lights, Waterproof Boat Interior Light, Under Gunnel Lights, Boat Deck Light, Night Fishing Lights, Good for Pontoon Bass Fishing Yacht Kayak (Blue)

  • ...y on birthday, Christmas or party, especially for boat lovers..
  • 【Super Bright LED Strip】: 720 Pcs Super bright 5050 blue LEDs are evenly embedded on the 12m(40ft) double-layer pure copper FPCB Board and give out beautiful blue light. High-density 60 LEDs/M design makes luminescence more even and natural..
  • 【Flexible Design & Easy to Install】: The Lights Using flexible copper circuit board, you can gently bend it, Please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack. The strip lights can be cut between every 3 LEDs along the cutting marks to fit for your project, great for DIY. The light strip comes with strong 3M back adhesive, mounting clips to help keep the boat light strip stay in place..
  • 【Safe & Waterproof】: This LED strip light is fully covered with water-resistant glue. Waterproof rating is IP65, It can withstand the rainy and snowy weather and protect LED from damage, greatly extend the life of the strip lights to 50,000 hours or more. LED strip with operating voltage of 12V, low heat, no radiation, no flicker, harmless to the human eye, i....
Check Stock

Led Magic Glow Board 16’’x 12’’Illuminated Erasable Neon Effect Sign Board Tablet Pad with 10 Fluorescent Chalk Markers Perfect for Christmas Gift/ Shop/Cafe/Bar/Menu/Wedding/Decoration/Promotion

  • Unique Material&Design: The upgraded acrylic material is environmentally-friendly, durable, The product has undergone rigorous testing to ensure its....
  • Flash Modes: Light up kids art set is18 colors with good light transmission, can choose a variety of colors.
  • 6 replacement modes: flash / strobe /....
  • Widely Use: This Writing Board is perfect for Kid’s Drawing, helps children to inspire the inspiration and creativity, also work great for....
  • Clean Ways: We advise to clean this board by a damp cloth, if there still some mess, then can use a dry soft cloth or paper, the board will be cleaned....
  • Portable and Convenient: This unique craft kit board can be use in OUTDOOR and INDOOR, simply connect to USB power bank, USB travel charger, USB car....
Check Stock

LED Boat Strip Lights, 32.8FT Marine Pontoon Led Lights, Waterproof Boat Interior Light, Under Gunnel Lights, Boat Deck Light, Night Fishing Lights, Good for Pontoon Bass Fishing Yacht Kayak (Green)

  • ...n birthday, Christmas or party, especially for boat lovers..
  • 【Super Bright LED Strip】: 600 Pcs Super bright 5050 green LEDs are evenly embedded on the 10m(32.8ft) double-layer pure copper FPCB Board and give out beautiful blue light. High-density 60 LEDs/M design makes luminescence more even and natural..
  • 【Flexible Design & Easy to Install】: The Lights Using flexible copper circuit board, you can gently bend it, Please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack. The strip lights can be cut between every 3 LEDs along the cutting marks to fit for your project, great for DIY. The light strip comes with strong 3M back adhesive, mounting clips to help keep the boat light strip stay in place..
  • 【Safe & Waterproof】: This LED strip light is fully covered with water-resistant glue. Waterproof rating is IP65, It can withstand the rainy and snowy weather and protect LED from damage, greatly extend the life of the strip lights to 50,000 hours or more. LED strip with operating voltage of 12V, low heat, no radiation, no flicker, harmless to the human eye, i....
Check Stock

LED Boat Strip Lights, 32.8FT Marine Pontoon Led Lights, Waterproof Boat Interior Light, Under Gunnel Lights, Boat Deck Light, Night Fishing Lights, Good for Pontoon Bass Fishing Yacht Kayak (Blue)

  • ...on birthday, Christmas or party, especially for boat lovers..
  • 【Super Bright LED Strip】: 600 Pcs Super bright 5050 blue LEDs are evenly embedded on the 10m(32.8ft) double-layer pure copper FPCB Board and give out beautiful blue light. High-density 60 LEDs/M design makes luminescence more even and natural..
  • 【Flexible Design & Easy to Install】: The Lights Using flexible copper circuit board, you can gently bend it, Please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack. The strip lights can be cut between every 3 LEDs along the cutting marks to fit for your project, great for DIY. The light strip comes with strong 3M back adhesive, mounting clips to help keep the boat light strip stay in place..
  • 【Safe & Waterproof】: This LED strip light is fully covered with water-resistant glue. Waterproof rating is IP65, It can withstand the rainy and snowy weather and protect LED from damage, greatly extend the life of the strip lights to 50,000 hours or more. LED strip with operating voltage of 12V, low heat, no radiation, no flicker, harmless to the human eye, i....
Check Stock

DORHEA 5PCS ESP8266 ESP-12F Development Board Internet NodeMCU WiFi Serial Wireless Module NodeMCU-12F CP2102 Based on ESP8266 WiFi Module for motherbord IDE/Micropython

  • ESP8266 is a highly integrated chip designed for the needs of a new connected world.It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor..
  • The controllers are easy to program by using the CP2102-USB interface without having to press the flash and reset buttons before each flash operation..
  • It is an integrated unit with all available resources on board. It's very easy for Arduino projects or any development board with I / O pins. Modern Internet development tools can use the built-in API to instantly put your idea on the fast track..
  • ESP8266 NodeMcu board has powerful on-board processing and storage capabilities, allows to be integrated with sensors and other specific applicated devices through its GPIOs..
  • Perfectly compatible with the motherbord IDE/Mongoose IoT/Micropython. This ESP8266NodeMcu development board can be use for small temperature and humidity monitorin home automation project and works very well with the motherbord development platform.
Check Stock

DORHEA ESP8266 Code Burner Firmware Downloader Flash Download Tool Test Board + 5pcs ESP-12E ESP12E WiFi Module, Wireless Transmission Serial Transceiver Receiver

  • ESP8266 ESP-12E WiFi serial module built-board PCB antenna, 4M bytes Flash.
  • Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M)..
  • The ESP8266 test board code burner flash downloader compatible with ESP-01 ESP-01S ESP-07 ESP-07S ESP-12E ESP-12F ESP-12S ESP-F. Micro USB interface, this module is very easy to program..
  • ESP8266 code burner firmware downloader all IO ports have been drawn out and can be used as ZUI small system development board or small batch burning fixture. The board supports one-click firmware download function, and add burning..
  • Easy to use: ESP8266-12E is a combined products,it's very convenient to operate(Need to solder 3V regulator by youself )..
  • ESP8266-12E is an enhanced version ESP8266-12, improving the external circuit, enhanced impedance signal output is better, whether it is stable or anti-jamming capability , have been greatly improved..
Check Stock

ZONGYANXIE Pendant Light for Bedroom Bedside Living Room Kitchen Dining Table Bar Decoration Modern LED Butterfly Hanging Light Fixture (Colours)

  • HIGH PERFORMANCE - it uses PMMA light guide material and titanium silver hardware combination, the inside of the wings inlaid with LED advanced light source, three-color light adjustable. White light and warm light 6W, natural light 12W.
  • HIGH QUALITY - Light body selection of alloy materials, multi-process production, mirror plating process refraction effect is good, durable and not easy to rust.
  • EASY INSTALL - Comes with all mounting hardware for quick and easy installation Fully adjustable height, free height distribution, random posture.
  • STABLE lUMINESCENCE - stable luminescence rejects visual strobe (no linear horizontal lines on the display when the phone is shot, i.e. no visual strobe).
  • WIDE APPLICATION - This pendant light is perfect for bedroom bedside, study, living room, restaurant bar, corridor aisle, club, coffee bar, etc..
Check Stock