Categories

Best Lumintool Aa 0

LAMPVPATH (Pack of 6) Single AA Battery Holder, 1 X 1.5V AA Battery Holder, AA Battery Holder with Leads Wires

  • Type of AA Battery Holder: 1 aa battery holder, 1x 1.5V aa battery holder with leads.
  • Package Contents: 6Pcs 1 aa battery holder with wires.
  • Voltage Output of One 1 AA Battery Holder: 1.5V, 1x 1.5v single aa battery= 1.5 volt aa battery holder.
  • Dimensions of 1 AA Battery Holder: 2.248" x 0.669" x 0.539"/5.71cm x 1.70cm x 1.37cm(L*W*H).
  • Weight of "single aa battery holder": 0.141oz/4g.
  • Leads: all aa battery holder with leads, they are tinned wire end.
  • Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • DIY Extension: Join two 1 X 1.5V single aa battery holder with leads can get a 3Volt aa battery holder.
  • Join three 1 X 1.5V single aa battery holder can get a 4.5Volt aa battery holder.
  • Join four, join five, join six......So, by simple DIY, you can got 3Volt aa battery holder, 4.5Volt aa battery holder, 6Volt aa battery holder, 9Volt aa battery holder..
Check Stock

Commercial Trane Thermostat; PROGRAMABLE Touch Screen 3H/2C

  • Replaces / Supersedes:  BAYSTAT152A , THT2775 , THT02775 , THT-2775 , THT02552 , THT2552 , THT-2552 , THT02553 , THT-2553 , THT2553 , THT03120 , THT-3120 , THT3120 , BAYSTAT052AA , BAYSTAT053AA and others..
  • Commonly used with the following units: YHC072F3***0* , YHC072F4***0* , YHC072FW***0* , YHC074F3***0* , YHC074F4***0* , YHC092F3***0* , YHC092F4***0* , YHC092FW***0* , YHC102F3***0* , YHC102F4***0* , YHC102FW***0* , YHC120F3***0* , YHC120F4***0* , YHC120FW***0* , YSC033G3***0* , YSC033G4***0* , YSC033GW***0* , YSC036G3***0* , YSC036G4***0* , YSC036GW***0*.
  • BAYSTAT152A , THT2775 , THT02775 , THT-2775 , THT02552 , THT2552 , THT-2552 , THT02553 , THT-2553 , THT2553 , THT03120 , THT-3120 , THT3120 , BAYSTAT052AA , BAYSTAT053AA and others..
Check Stock

LAMPVPATH (Pack of 2) 8 AA Battery Holder, Two Layers Battery Case, 12v AA Battery Holder, 8 AA Battery Holder with Leads with (Pack of 2) I Fonts Clip Connector

  • Battery Holder Type: 8 x aa battery holder, 12 volt battery holder.
  • Construction: Two layers,each layer can load 4 AA batteries,totally can load 8 AA batteries.
  • Voltage Output of 8 Cell AA Battery Holder : 12V, 8 x 1.5V aa battery= 12v battery holder.
  • Dimensions of 12v AA Battery Holder(L*W*H): 4.37" x 1.30" x 1.22"/11.1cm x 3.3cm x 3.1cm.
  • With 9V Snap Connector Size: 0.94" x 0.51" x 0.39"/2.4cm x 1.3cm x 1cm with wire length 14.5cm/5.7".
  • Weight: 14g/0.50oz(one 8aa battery holder and one 9V battery connector).
  • Package Content : (2 Pcs) Two Layers 8 AA Battery Holder for 8 AA Batteries with (2 Pcs) 9V I Type Snap Connector.
Check Stock

LAMPVPATH (Pack of 3) 2 AA Battery Holder, 2 AA Battery Holder with Leads, 2 AA Battery Holder with Wires

  • Type of AA Battery Holder: 2 aa battery holder, 2x 1.5V aa battery holder with leads.
  • Voltage Output of One 2 AA Battery Holder with Wires : 3V, 2 x 1.5v aa battery= 3v aa battery holder.
  • Dimensions of Battery Holder for AA: (L*W*H)/2.303" x 1.276" x 0.575"/5.85cm x 3.24cm x 1.46cm.
  • Weight of One Double A Battery Holder: 0.247oz/7g.
  • Leads: all 2 aa battery holder with leads, they are tinned wire end.
  • Wires Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • Wires Color of Battery Holders: red and black.
  • Package Contents: 3Pcs 2 aa battery holder with wires.
Check Stock

LAMPVPATH (Pack of 2) 2 AA Battery Holder with Switch, 2X 1.5V AA Battery Holder Case with Wire Leads and ON/Off Switch

  • Battery Type: 2 AA batteries, 2x 1.5V AA batteries. There are 2 pcs 2aa battery holder in the package..
  • Battery Holder Switch Function: AA battery holder with ON/OFF switch.
  • Wire Leads: 2 aa battery holder with wire leads, tinned wire end.
  • Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • AA Battery Case Dimensions: 2.71" x 1.34" x 0.75"/6.88cm x 3.4cm x 1.9cm(L*W*H).
  • One Battery Holder with One Screw Weight: 0.67oz/19g.
  • Package Contents: 2 Pcs battery holder with 2Pcs screws.
Check Stock

Aobao 8pcs Single AA Battery Holder 1 X 1.5V AA Battery Holder Case Box with Leads Wires

  • 【AA Battery Holder Type】1 aa battery holder, 1x 1.5V aa battery holder with leads..
  • 【Package Included】 8pcs single aa battery holder with leads wires(batteries not included). With spring load design, can easily put the battery in it..
  • 【Size of 1 AA Battery Holder】Body size : 5.7 X 1.7 X 1.4 cm/2.24" X 0.66" X 0.55"(L*W*H).
  • 【High-quality material】Maded of high quality material, plastic ABS, Lightweight, exquisite workmanship..
  • 【DIY Supplies】1 X 1.5V single aa battery holder with leads can be connected to multiple battery boxes, and 3V aa battery holder, 4.5V aa battery holder, 6V aa battery holders can be obtained by simple DIY. Perfect to be used as a external power source..
Check Stock

LAMPVPATH (Pack of 3) 8 AA Battery Holder, 12v AA Battery Holder, 8 AA Battery Holder with Leads

  • Battery Holder Type: 8 x aa battery holder, 12 volt battery holder.
  • Voltage Output of 8 Cell AA Battery Holder : 12V, 8 x 1.5V aa battery= 12v battery holder.
  • Dimensions of 8 AA Battery Holder: (L*W*H)/4.257" x 1.221" x1.221"/10.812cm x 3.10cm x 3.10m.
  • Wire Leads: 8 aa battery holder with leads, tinned wire end.
  • Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • Weight of One 12v AA Battery Holder: 0.494oz/14g.
  • Package Contents: 3Pcs battery holder for 8 aa.
Check Stock

Eastern Motorcycle Parts Wheel Bearing Spacer A-43612-92

  • Genuine Oem:Yes, Fitment Type:Direct Replacement, Category 1:Engine, Superseded Part Number:04884292AA, Item Name:Valve Cover Bolt Assembly, Width:0.669 [in].
  • Brand:Mopar, Other Part Number:04884292AA, Category 2:Engine / Transaxle, Weight:0.04 [lb], Quantity Needed:1.
  • Manufacturer Part Number:4777997AA, Height:0.669 [in], Category 3:Engine Parts, Length:1.535 [in], Part Ref# On Diagram:ONLY PART REFERENCE #16 ON THE DIAGRAM I.
Check Stock

HFP-WBS42 LSU4.2 Wideband O2 Sensor - Replacement for 0258007206 Replaces - PLX AEM 30-2001 4100 （0258007206）

  • Interchange Part Number:0258007336, 0 258 007 336,0258007207,0 258 007 207,30-2001,2243, 170408, 48292001, 12575657,213-1572，17018，17204，234-5060.
  • Application: 2005-2007 Cadillac CTS 2.8L 2004-2015 SRX 3.6L 4.6L 2006-2015 350Z Murano 3.5 2005-2015 Pathfinder Infiniti FX35 M35 3.5 M45 4.5.
  • High quality temperature resistant and abrasion resistant materials,Easy installation and 100% rigorous tested before shipment.Quality comparable to the original factory.Please rest assured to purchase,If you have any questions about our products, welcome you contact us by email at any time.I will help you solve the problem as soon as I receive the emai.
  • Other part number:0258006041,0258006047,0258007001,0258007008,0258007011,0258007018,0258007027,0258007038,0258007039,0258007065,0258007066,0258007067,0258007115,0258007179,0258007180,0258007185,0258007186,0258007202,0258007203,0258007204,0258007205,0258007206,0258007264,0258007265,0258007287,0258007288,12575657,178290,1821382Z10,182837,22641AA011,22641AA012,22641AA01A,22641AA01B,22641AA01D,226936M400,226936N101,226936N101,226937S000,226937Y000,226937Y020,226938U300,22693EA000.
Check Stock

LAMPVPATH 3 Pcs 4 x 1.5V 6V AA Battery Holder Leads with 3 Pcs 9V I Type Snap Connector Plastic Housing Two Layers Battery Case

  • Battery Type: 4 x aa battery, 4 x 1.5V (6V) AA battery.
  • 4 AA Battery Holder Body Size : 6 x 3 x 3cm/2.36" x1.18 " x1.18 "(L*W*H).
  • 9V Snap Connector Size( Each ) :2.4 x 1.3 x 1cm/0.94" x 0.51" x 0.39" with wire length 14cm/5.5".
  • Material:plastic ABS+Metal, Color : Black,Weight: 15g.
  • Package Content : (3 Pcs) 4-slots Two Layers AA Battery Holder for 4 Batteries with (3 Pcs) 9V I Type Snap Connector.
Check Stock

Fenix LD22 v2.0 800 Lumen Rechargeable Penlight EDC Flashlight - Compatible with 2X AA Batteries with LumenTac Battery Organizer

  • BRIGHT PENLIGHT - The Fenix LD22 v2.0 has an 800 lumen max that can reach up to 234 yards beam throw..
  • USB-C RECHARGEABLE - The LD22 v2.0 comes with an included ARB-L14-1100U USB-C rechargeable battery providing up to 220 hours of runtime..
  • 2x AA COMPATIBLE - Perfect for emergency kits and power outages, the LD22 v2.0 can also be powered by two AA batteries, and included in the package..
  • COMPACT EDC PENLIGHT - The LD22 v2.0's rugged aluminum frame, and steel bezel fits all the power in a sleek penlight frame perfect for EDC..
  • CONTENTS IN PACKAGE: Fenix LD22 v2.0, Fenix ARB-L14-1100U Rechargeable Battery, 2xPairdeer AA Alkaline Batteries, USB-C Charging Cable, Holster, Lanyard, LumenTac Battery Organizer.
Check Stock

PHILTOP Ignition Coil Pack, UF710 OE Coil Pack Set of 4 Replacement for FR-S, BRZ, Forester, Impreza, Legacy Outback, XV Crosstrek, IGC191 Ignition Coil

  • ...013-2014, BRZ 2013-2014, Forester 2014-2016, Impreza 2013-2015, Legacy 2013-2014, Outback 2013-2014, XV Crosstrek 2013-2014. For more models, please check fitment!.
  • [Reference Number] Ignition coils undergone strict quality control testing, providing excellent performance and reliability. OE Interchange Number: 22433AA651, 22433AA652, 22433AA67A, 22433AA67B, 22433AA680, 22433AA681, 22433AA690, 22433AA691, SU00300417, SU00304713, UF720, UF721, UF722, UF723, UF724, UF737.
  • [Easy Installation] OE design ensure fast and easy installation with perfect fit. Ignition coil pack set of 4 is included. Please check the compatibility at the top of the page to confirm the part number to match your vehicle and make sure you get the correct coils..
Check Stock

LAMPVPATH Pack of 2 4 AA Battery Holder 4 AA Battery Holder with Leads 4 AA Battery Holder with Wires

  • Type of AA Battery Holder: 4 aa battery holder, 4x 1.5V aa battery holder with leads.
  • Voltage Output of One 4 AA Battery Holder with Wires : 6V, 4 x 1.5v aa battery= 6v aa battery holder.
  • Dimensions of Battery Holder for 4 AA: (L*W*H)/2.248" x 2.457" x 0.622"/5.71cm x 6.23cm x 1.58cm(L*W*H).
  • Weight of One 4 Cell AA Battery Holder:....
  • Leads: all 4 aa battery holder with leads, they are tinned wire end.
  • Wires Diameter(count in the PVC isolation around the....
  • Package Contents: 2Pcs 4 aa battery holder with wires.
Check Stock