Categories

Best M12 Taps

uxcell Thread Milling Threading Tap 1/4\-28 UNF, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 3 Straight Flutes 2B Tolerance Grade

  • Specifications: M3×0.5, M4×0.7, M5×0.8, M6×1.0, M8×1.25, M10×1.5, M12×1.75 that you can use for tapping various threads..
  • Material: high speed steel 4241/ bearing steel, suitable for soft metal, such as aluminum plate, iron plate. High speed steel 6542, suitable for ordinary stainless steel and other hard materials..
  • Standard thread distance design, clear and tidy, no burr..
  • One set including 8 tools：M3 M4 M5 M6 M8 M10 M12 with Adjustable Tap Wrench 1/16-1/2''..
  • These machine hand taps are used for machining nuts or other common thread on the machine..
Check Stock

Helicoil 5546-6 M6 x 1 Metric Coarse Thread Repair Kit

  • ALL-IN-ONE KIT: This 262-piece thread repair tool kit by Orion Motor Tech includes bits, taps, and inserts in the 5 most needed SAE and metric sizes: M5, M6, M8, M10, and M12 as well as 1/4.
Check Stock

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

  • Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
  • Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
  • Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
  • Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
  • Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....
Check Stock

uxcell M8x1.25mm Straight 4 Flutes Metric Bottoming Taper Hand Taps 3pcs

  • Tap Size: M12 x 0.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

Sunxenze 8pcs Metric Thread Machine Taps Set, Hand Screw Thread Plug Taps M3 M4 M5 M6 M8 M10 M12 with Adjustable Tap Wrench 1/16-1/2''

  • Specifications: M3×0.5, M4×0.7, M5×0.8, M6×1.0, M8×1.25, M10×1.5, M12×1.75 that you can use for tapping various threads..
  • Material: high speed steel 4241/ bearing steel, suitable for soft metal, such as aluminum plate, iron plate. High speed steel 6542, suitable for ordinary stainless steel and other hard materials..
  • Standard thread distance design, clear and tidy, no burr..
  • One set including 8 tools：M3 M4 M5 M6 M8 M10 M12 with Adjustable Tap Wrench 1/16-1/2''..
  • These machine hand taps are used for machining nuts or other common thread on the machine..
Check Stock

Irwin Hanson 9740 1\ 10mm-1.5 Hexagon Metric Die

  • ...M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
  • SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
  • Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
  • Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
  • T Handle Tap Wrench: T Handles hold the end of a tap to provide extra leverage for hand tapping making them very useful for confined spaces or where extra reach or lev....
Check Stock

Happybuy 110Pcs Tap & Die Set Tungsten Steel Titanium Tap & Die Metric Tool Tap & Die Combination Set For Cutting External & Internal Threads

  • Premium Quality: High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Most Popular Sizes Included: This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M2 - M12 (1/16" - 1/2"& M6 - M20 (1/4" - 3/4")), 2 die holders (200mm (1" diameter bore)& 270 mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included.
Check Stock

uxcell Straight Flute Taps M12 x 1.5 Metric Left Hand Titanium Coated M35 Cobalt High Speed Steel Machine Tapping Screw Thread Milling Tap Machinist Repair Threading Tool

  • Straight Flute Taps: Thread size: M12 x 1.5.
  • cutting direction: left hand (reverse). Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Wide Applications: Suitable for processing through holes. Used for drilling and tapping stainless steel, aluminum, die steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min.
  • Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. M35 Cobalt high speed steel tool features high hardness (HRC65-66), high red hardness, high wear resistance, good toughness..
  • Easy to Use: The thread tap is used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Prone to chipping or breaking due to speed overload or non-vertical tapping..
Check Stock

YAKAMOZ 30Pcs Thread Repair Insert Kit Damaged Threads Rethreading Drill Bit Taps Tool Set for Helicoil Type Metric M6 Internal Screw Holes Repairing

  • Master helicoil thread repair kit used for creating stronger internal threads in all metals, composites, polymers and other materials by repairing damaged or stripped internal threads and regaining the original thread size..
  • 304 Stainless thread inserts create longer lasting durable threads, increase the possibility of higher torque application in weaker metals..
  • Master thread repair kit includes a collection of tools including HSS drill, tap, thread inserts, installation tool, break pin tool..
  • Metric Size: 5pcs HSS drill bits, 5pcs HSS taps, 5pcs break pin tools.
  • Includes 25 Each thread inserts: M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5.
  • SAE Size: 5pcs HSS drill bits, 5pcs HSS taps, 5pcs break pin tool.
  • Includes 25 Each thread inserts: 1/4''-20, 5/16''-18, 3/8''-16, 7/16''-14.
Check Stock

86PC Tap and Die Set Combination Metric Tap and and Die Set Tungsten Steel Titanium SAE and Metric Tool

  • Premium Quality: High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Sae And Metric Included: This  tap and die set comes with 86 pieces in total: 39 pcs taps,39 pcs dies, 2 tap holders (M6 to M20 - 1/4" to 3/4"& M3 to M12 - 1/16" to 1/2"), 2 die holders (M25 - 1") & (M38 - 1-1/2")and 1 T-bar tap wrench, most popular sizes included..
Check Stock

WYNNsky Die and Tap Set in SAE and Metric Hex Threading Dies for External Threads Thread Tap for Internal Threads Thread Wrench Thread Pitch Gauge 86 Pieces Gauge Kit for DIY Tapered

  • ...M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
  • SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
  • Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
  • Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
  • T Handle Tap Wrench: T Handles hold the end of a tap to provide extra leverage for hand tapping making them very useful for confined spaces or where extra reach or lev....
Check Stock

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • ...of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
  • Use the breaking pin tool to remove tang from insert.
Check Stock

Painless Performance 30118 Dual Activation, Dual Electric Fan Relay Kit with Thermostatic Switch (On 205/Off 190) for LSX

  • Dual activation cooling fan relay will turn your cooling fans on when the engine reaches the preset temperature of the thermostatic switch mounted in the engine head or when the A/C is turned on.
  • Ideal for installing air conditioning in your project car.
  • Features simple to use Posi-taps for the ignition and A/C compressor connections.
  • Kit includes: Three 40-amp relays with mounting bases & wiring, fuse holder & 70-amp fuse, two LT1/LS1 fan connectors, thermostatic switch, adapter and insulated terminals.
  • Thermostatic switch turns on at 205 degrees and off at 190 degrees.
Check Stock