Categories

Best M12 X 1 5 Thread Repair Kit

Helicoil 5546-6 M6 x 1 Metric Coarse Thread Repair Kit

  • ALL-IN-ONE KIT: This 262-piece thread repair tool kit by Orion Motor Tech includes bits, taps, and inserts in the 5 most needed SAE and metric sizes: M5, M6, M8, M10, and M12 as well as 1/4.
Check Stock

M12 x 1.25mm Thread Repair Kit 10pcs Stainless Insert Helicoil + Drill + Tap Set ABBOTT

  • Metric M12 x 1.25mm x 1.5D thread repair kit.
  • Include: 10pcs stainless insert, tap and 12.3mm drill bit..
Check Stock

TAILUG Thread Repair Kit 261-Piece HSS Drill Helicoil Repair Kit SAE & Metric 1/4 5/16 3/8 7/16 1/2 M5 M6 M8 M10 M12 with HSS Drill Threaded Inserts Screw Tap Installation and Tang Break Tool

  • 【WIDELY USED】: Our drill and tap set creates a stronger internal thread in soft metals and protects tapped threads against wear and damage. It is suitable for repair stripped or damaged internal threads and widely used in automotive and plumbing applications..
  • 【SAE & METRIC】: Standard 261pcs thread repair kit, includes HSS drill bits, wire thread inserts, STI taps, installation and tang break tools. 1/4", 5/16", 3/8", 7/16", 1/2", M5, M6, M8, M10, M12 of SAE and metric sizes get you fully equipped..
  • 【EXCELLENT MATERIAL】: The helicoil kit is made of high-speed steel, with better hardness and toughness after heat treatment. Chrome finish surface is for anti-rust. The thread inserts made of heat-treated 45# steel has better toughness and is not easy to wear and deformation. Extended service life..
  • 【HIGH PRECISION】: 135° apex angle of twist drills, with stronger metal penetration and higher efficiency. HSS screw taps have precise screw threads, offer large chip space and small resistance during cutting. Workmanship meets and exceeds ANSI standards..
  • 【PORTABLE & GUARANTEE】: Everything you’ll need for thread repairing is supplied in a durable carry case, ensuring safe storage and protection when not in use. Sizes and quantities a....
Check Stock

AB Tools-Neilsen M12 x 1.25mm Thread/Tap Repair Cutter kit helicoil 15pc Set Damaged Thread

  • Supplied with three different length inserts.
  • Creates stronger internal thread in soft materials.
Check Stock

BTSHUB Silent Bearing Puller Kit Dent Puller Set, Differential Rear Axle Bush Tools Mount Bushing Kit for BMW E36/46, E38/39, E60/61, E31,E90/91

  • FEATURES: Including differential and axle bush tools, this is a comprehensive kit to renew the ball joints and bearings in the rear wheel carrier, longitudinal arms and rear axle, etc. A 8.9" feed rod for actuating the Silent bearing inserts with thread M12 x 0.06" long, at the end of the spindle with thread M12 x 0.06" short.
  • EASY FOR STOREAGE: Comes with a premium well-organized box for easy storage and transport. All thread repair tools are stored safely and orderly in a beautifully packaged box that can withstand high-strength extrusion without deformation and protect the product from damage. If any quality problem, please feel free to contact us..
Check Stock

10pcs Thread Repair Sleeves Reducer Nuts M8 Female and M12 Male Thread Conversion

  • USES - The repair nut is an industrial fastening part, which is mostly used with screws or bolts. If a thread error occurs or a damaged threaded hole is repaired, the repair nut can be used to repair the threaded hole in an efficient manner..
  • WIDE RANGE OF APPLICATION - These Repair Nuts are widely used in aviation, automobile, electronic communication, computer, mold, mechanical equipment and other manufacturing fields..
  • FEATURES - The thread size is standard, the thread is clear, and it will be more accurate for thread sliding tooth restoration..
  • FOR EXAMPLE - If the M8 thread is slippery, and if you want to continue to use the M8 thread after the restoration, use this method to first expand the M8 thread to the M10 thread, and then use the M8-M10-12 length reducer to change it back to M8, because the material of this reducing diameter is stainless steel, it will make the M8 thread more firm.
Check Stock

15 Pcs Thread Inserts M14x1.5 Female Thread Repairing Accessory Assortment Kit Drill Helicoil Repair Kit

  • Extremely stable performance: This thread helical coil repair tool kit is made of high speed steel and red color plastic handle, sturdy and durable in use and can be used in daily repair, car repair, drilling machine, etc.
  • Made of stainless steel of good rust and corrosion resistant..
  • Excellent practicability: The wire screw set is placed in the screw hole of the workpiece such as aluminum alloy to form a standard internal thread with high strength, wear resistance and high precision. Typical applications: high voltage switchgear, microwave communication, automotive parts, air separation equipment, radiators, etc..
  • Cost effective thoughtful kit: The use of wire screw sleeves for mm ---inch threaded hole conversion is convenient and fast. The imported equipment or mechanical inch thread is damaged, and it needs to be changed to mm thread due to the supply of spare parts.
  • All accessories are integrated in a box for convenient transportation and carriage..
  • Definitely recommend: Thread helical coil repair tool kit is ideal for restoring damaged threads, suitable for engine repair and otherautomotive applications for steel, cast Iron and aluminium. This kit helps create a stronger internal thread in soft metals and protects tapped threads against wear and da....
Check Stock

Compression Tester Automotive - 8PCS Engine Cylinder Pressure Gauge for Petrol Gas Engine Automotive Tool Gauge for Car & Truck

  • ...1x straight push-on connectors, 1 x angled push-on connectors, 4x brass adapters with metric male fittings & O-rings: Manometer with two test pressure: 0 - 300 PSI / 0 - 21 kg / CM². Hose overall length: 430mm, pressure tube length: 153mm, angled pressure tube length: 155mm. Pressure gauge diameter: 75mm, four thread size: M10 x 1.0mm, M12 x 1.25mm, M14 x 1.25mm, M18 x 1.5mm. M10 thread is suitable for motorcycles, M12 / M14 / M18 threads are suitable for car..
  • 【100% SATISFACTION】: We are responsible for every product. If you have any problems with our products or services, please contact us immediately and we will provide you with exceptional responses to your every concern..
Check Stock

Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set-5 Pcs, 02 Oxygen Sensor Socket Offset Wrench Remover Tool,A7841F-FBA +Thread Chaser,by Lucky Seven

  • Oxygen Sensor Socket Wrench Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Oxygen Sensor Socket Wrench Set Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires，Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines..
  • 5 Pcs Oxygen Sensor Switch Socket Wrench Kit and Thread Chaser Set-3 types of universal socket wrenchs cover various situations of oxygen sensor location,6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
  • Oxygen Sensor Socket Wrench kit-Including 3 oxygen sensor sockets and 2 thread chasers for cleaning and repairing damaged threads,oem oxygen sensor wrench socket,oxygen sensor wrench socket,o2 oxygen sensor socket wrench,o2 sensor socket wrench,oxygen sensor wrench set,oxygen sensor wrench tool,oxygen sensor wr....
Check Stock

10Pcs M12 to M8 Thread Reducer Nuts, Stainless Steel Repair Sleeve M8 Female Thread M12 Male Thread Conversion Kit Suitable for for Plumbing Connections Compressed Air Hydraulic Automobile

  • Made of 303 Stainless Steel: The reducer nut is made of durable 303 stainless steel, which is resistant to high temperature, strong and wear-resistant.
  • Wide Range of Uses: Repair nut is an industrial fastening part, mostly used in conjunction with screws or bolts. If a thread error occurs or a damaged threaded hole is repaired, a repair nut can be used to effectively repair the threaded hole.
  • Recommendations for Use: If the M8 thread is very slippery, if you want to continue to use the M8 thread after the repair, use this method to expand the M8 thread to M10 thread, and then use the M8-M10-12 length reducer to change it back to M8, because this reduces the diameter The material is stainless steel, which will make the M8 thread stronge.
  • Wide Range of Applications: These repair nuts are widely used in aviation, automobiles, electronic communications, computers, molds, mechanical equipment and other manufacturing fields.
  • Thread Size Standard: Internal thread M8 x 1.25.
  • length: about 18 mm/0.7 inches. The thread is clear, and the thread sliding tooth restoration is more accurate.
Check Stock

Irwin Hanson 9740 1\ 10mm-1.5 Hexagon Metric Die

  • Threading Dies and Tap Size: Metric Size M3×0.5, M4×0.7, M5×0.8, M6×1.0, M7×1.0, M8×1.0, M8×1.25, M9×1.25, M10×1.25, M10×1.5, M11×1.25, M11×1.5, M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
  • SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
  • Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
  • Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
Check Stock

Aramox Tap Tool,2Pcs Carbon Steel Spark Plug Thread Insert Tap Set M101.0 / M121.25 M141.5 / M181.5

  • 100% brand new and high quality spark plug thread insert tap repair tools.
  • With the size of M10 * 1.0 / M12 * 1.25, M14 * 1.5 / M18 * 1.5.
  • A nice tool kit for repair damaged spark plug installing threads.
  • Made of hardened carbon steel, these accessories are of strong strength and long durability.
  • Easy to use and operate. Come and have a try.
Check Stock

ABN Professional Thread Repair Kit - 131pc SAE Drill Thread Restorer Kit for Restoring External or Internal Screw Holes

  • [Restore Stripped Screws]: Repair stripped threads with the ABN Thread Repair Tool Set.
  • 131pc long rethreading kit is ideal for repairing 1/4, 5/16, 3/8, 7/16, or 1/2-inch internal or external screw holes.
  • [Use for Any Job]: Fix up your engine or restore automotive wear and tear with the rethreading tool kit.
  • Complete any drilling, tapping, and tang removal jobs with the thread chaser set.
  • [Carry With You Anywhere]: Spark plug thread chaser and bolt hole thread repair kit comes in a steel case to keep all 131 pieces neatly organized and labeled for your convenience.
  • Lightweight 5lb (2.3kg) case is easy to transport between job sites and takes up little room making it easy to store.
  • [Rely on Maximum Strength]: Thread fixer tools are constructed of chrome vanadium steel to withstand repeated use and to help prevent corrosion.
  • Inserts are heat-treated for long-lasting strength.
  • [Package Details]: Bolt thread cleaner tool standard thread repair kit includes 5 twist drills, 5 screw taps, 5 installation tools, 5 breaking pin tools, 111 thread inserts, and a carrying case.
Check Stock