Categories

Best M5 m20 Tap Set

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

  • Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
  • Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
  • Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
  • Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
  • Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock

CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8

  • Product Name: CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8.
  • ✔ Type Size: M3: 3 mm * 0.5 , M4: 4 mm * 0.7 , M5: 5 mm * 0.8 , M6: 6 mm * 1 , M8: 8mm * 1.25.
  • ✔ Material: HSS 6542 Titanium coating, cutting will not be left. Have good machinability. High hardness, fast cutting, wear high temperature.
  • ✔ Spiral groove is reduced to remove crumbs, not easily broken tap. Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and Sticky materials processing.
  • ✔Applicable Workpiece: tensile strength 750N / mm 2 or less the low-carbon steel, copper, aluminum, hardwood, plastic.
Check Stock

Happybuy 86PC Tap and Die Set Combination Metric Tap and Die Sae Tap and Die Set Tungsten Steel Titanium SAE and Metric Tool (86PC Tap and Die)

  • Premium Quality: High-duty heat-treated Tungsten steel construction, high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Ta wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Most Popular Sizes Included: This tap and die set comes with 86 pieces in total: 39 pcstaps,39 pcs dies, 2 tap holders (M6 to M20 - 1/4" to 3/4"& M3 to M12 - 1/16" to 1/2"), 2 die holders (M25 - 1") & (M38 - 1-1/2")and 1 T-bar tap wrench, most popular sizes included..
Check Stock

45 Pc Tap & Die Set Metric Mm Titanium Tungsten Steel Jumbo Thread Renew Tool

  • 86 Piece Tap and Die Set Bearing Steel Sae and Metric Tools, Titanium Coated with Metal Carrying Case.
  • Size:14.8 x 10.7 x 2.2"inch / 37.6 x 27 x 5.6cm. Weight:12lb / 5.4kg. Material upgrading:Alloy Steel 55¡ã- 60¡ã, Sizes Stamped Engraved-etched On the Metal.
  • SAE TAP SIZES and SAE DIE SIZES: 1/8"-27NPT, 4-40, 6-32, 8-32, 10-32, 10-24, 12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16-24, 3/8"-16,3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18.
  • METRIC TAP SIZES and METRIC DIE SIZES: M3-0.5, M4-0.7, M5-0.8, M6-1.0, M7-1.0, M8-1.0, M8-1.25, M9-1.25, M10-1.5, M10-1.25, M11-1.5, M11-1.25, M12-1.75, M12-1.5, M14-2, M14-1.5, M16-2, M16-1.5.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
  • Easy Storage: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
Check Stock

Prolinemax 18 Pc Metric HSS Tap & Drill Set

  • Tap Sizes: M2.5 x 0.45, M3.0 x 0.50, M3.5 x 0.06, M4.0 x 0.70, M5.0 x 0.80, M6.0 x 1.0,M8.0 x 1.25,M10.0 x 1.50,M12 x 1.75.
  • Drill Metric Sizes: 2.05,2.50,2.90,3.30,4.20,5.00,6.70,8.50,10.2mm.
  • Case Overall Dimension: 8''L x 4-3/8''W x 1-1/4''H *Estimate Only*.
Check Stock

Toolly 32pcs Tap and Die Set, Metric Hardened Steel Tool Set, Essential Threading & Rethreading Tool with Storage Case Perfect for Auto and Machinery Repair

  • 【32pcs Tap and Die Set】The package includes 28pcs (each size including 1x taper tap, 1x second tap, 1x plug tap and 1x die): M3 X 0.5, M4 X 0.7, M5 X 0.8, M6 X 1.0, M8 X 1.25, M10 X 1.5, M12 X 1.75.
  • 1 x Tap Wrench, 1 x Die Stock Wrench, 1 x Thread Pitch Guage, 1 x Screwdriver, to cover all your needs..
  • 【Product Function】Tap and die set in metric is perfect for rethreading fasteners, fastener holes for auto and machinery repair. Threading tool with storage case, can greatly increase your productivity and act as an important part to your work..
  • 【Tapered Teeth Design & Versatility】Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily. Perfect for creating new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel..
  • 【High Quality & Durable】Tap and die set adopts premium hardened steel material. The screw thread tapping tool is durable to use. The better the material the tougher the tap and die so they ensures durability and tool longevity to withstand professional uses..
  • 【SIZE LABLED】All of them are clearly labled with size for you to find quickly, and be able to pull the right size out of the box when you ....
Check Stock

wesleydrill Titanium Combination Tap Drill Bit Set 6 Pcs M3-M10 Screw Tapping Bit Multi-Function Bit Set Fit for Light Metal Aluminum Board Iron etc

  • [Specifications and packaging]: 6 Piece multi-function drill bit set.Include size:M3X0.5,M4X0.7,M5X0.8,M6X1,M8X1.25,M10X1.5..
  • [Fitment]: Tap drill bit set is a convenient hex shank drill tap bits set that can simultaneously complete hole drilling, tapping, deburring and countersinking.Suitable for drilling tapping cutting on light metal aluminum board iron etc..
  • [Material]: Thread drill bit set is made of HSS4341 (high-speed steel) +titanium coating for capability and durability..
  • [Advantage]: Drill tap bits set's 1/4 inch hex shank fits into power tools more easily and securely.When using M3-M6, the most suitable speed of the electric drill is 1200/sec, the M7-M10 is 1000/sec..
  • [Quick Replacement, One-Click Drilling]: Metric tap drill bits fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
Check Stock

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • ...of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
  • Use the breaking pin tool to remove tang from insert.
Check Stock

Aceteel 1/2\-28 UNEF HSS Tap And Die Set, 1/2 x 28 UNEF Machine Thread Tap And Round Thread Die Right Hand

  • Durable material: the tap and die set is made of alloy steel and metal, rugged and durable, can be applied for a long time.
  • Equipped with storage box, tap die tool set is easy to store and organize and use..
  • Practical repair tools: the thread tap set can help you to repair partially damaged nuts, bolts and threads.
  • When your worn-out screws are rusty and can no longer match your machine, this set can help you easily eliminate the flaws on the threads.
  • Fine craftsmanship: the polished thread tap kit is made with advanced technology and craftsmanship, which can fit nicely with screws.
  • In addition, after being treated with a corrosion-resistant satin finish, the thread cutting friction is smaller and the surface becomes stainless steel, making it to be more bright and textured.
  • Size information: the package comes with 9 x metric taps and 9 x metric dies in different specifications, namely, M3 (0.5 mm)/ M4 (0.7 mm)/ M5 (0.8 mm)/ M6 (1 mm)/ M7 (1 mm)/ M8 (1.25 mm)/ M9 (1.25 mm)/ M10 (1.5 mm)/ M12 (1.75 mm).
  • Adjustable tap wrench handle measures about 19.5 cm/ 7-11/16 inch long, suitable for M3 to M12 (1/16 to 1/2 inch), and the die wrench handle is about 20 cm/ 7-7/8 inch long, suitable for M25 (1 inch).
  • Suitable for beginners and skilled people: this tooth ....
Check Stock

6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC（Golden）

  • Complete Set: Set of 6 pcs drill bit tool, 6 different size tap drill bit, M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch, a variety of specifications to choose from, convenient for work..
  • 3-in-1 Combination Tap: Drilling - tapping - chamfering, three-in-one composite tap with hexagonal handle can be achieved in one step without frequent replacement, and the operation is more convenient and faster, high processing efficiency..
  • Professional Tools: The standard 1/4 inch hex shank can be installed on ordinary electric drills and bench drills, with strong locking force and not easy to slip. The pointed tap can be tapped to the bottom of the blind hole, large helix angle, better chip removal performance.
  • Premium Material: Our tapping bits are made of high-speed steel with titanium coating. They have high hardness, sharpness and wear resistance, high heat resistance and strong cutting performance. They are a good helper for cutting high-hardness materials..
  • Widely Application: Our tap drill bits have strong cutting toughness, suitable for various cutting series, processing range: copper, aluminum, brass, iron plate, steel, metal sheet, plastic and other metals..
Check Stock

AZUNO 60-Piece Metric&SAE Tap and Die Set, GCr15 Bearing Steel with T-Handle/Wrench/Gauge/Screwdriver in Storage Case, Master Threading Toolkit

  • 【60 Piece Tap and Die】: Set includes 54 taps & dies, 1 die handle, 1 T-tap wrench, 2 screw-pitch Gauge, 1 screwdriver, 1 tap wrench. Constructed by quality GCr15 bearing steel with pronounced performance in threading..
  • 【Common Sizes in Metric & SAE】: 10MM Dies&Taps: M3x0.5,M4x0.7,M5x0.8,M6x1.0,M7x1.0,M8x1.25,M9x1.25,M10x1.5,M10x1.0,M12x1.75.
  • 10UNC Dies&Taps: 4-40,6-32,8-32,10-24,12-24,1/4,5/16,3/8,7/16,1/2.
  • 6UNF Dies&Taps: 10-32,1/4,5/16,3/8,7/16,1/12.
  • 【Performance and Durability】: CNC machined Tap and Dies made by industry-grade GCr15 bearing steel with pronounced hardness and balanced ductility..
  • 【Easy for Storage】: Comes with a heavy-duty storage case, convenient for storage and carrying. It has identified slot for each piece so that to keep neat and easy finding..
  • 【Versatile Threading Tool Set】：This MASTER set is perfect for cutting and renewing external and internal threads to exact standards. Durable to process on hard metal such as alloy, steel and brass, for all-day performance in the shop or home project..
Check Stock

NEIKO 00908A Tap and Die Set | 76 Piece Threading Tool | Standard & Metric |Alloy Steel | Hexagon T Type Wrench | SAE and MM

  • [APPLICATION]: Taps and dies are tools used to create purpose screw threads, which is called threading. Use the tap to cut threads on the holes where threads fasteners are positioned and use the die to cut threads..
  • [DURABLE]: Tap and dies are constructed of durable alloy steel for a long life to build new tools or repair damaged and worn threads..
  • [SAE & METRIC]: 34pc tap & 34pc die: M3x0.5, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x1, M7x1, M8x1, M9x1, M10x1.25, M10x1.5 ,M11x1.5, M12x1.5, M12x1.75, M8x1.25, M9x1.25.
  • [SIZES]: 4-40UNC, 6-32UNC, 8-32UNC, 10-24UNC, 10-32VNF, 12-24UNC, 1/4-20UNC, 1/4-28UNF, 5/16-18UNC, 5/16-24UNF, 3/8-16UNC, 3/8-24UNF, 7/16-14UNC.
  • [SIZES]: 7/16-20UNF, 1/2-13UNC, 1/2-20UNF, 1/8-28BSP, 1/8-27NPT | 2pc screwdriver pitch gauge, 1pc screwdriver, 2pc T type tap wrenches: 1/4" and 1/2" capacity.
Check Stock

uxcell Thread Milling Threading Tap 1/4\-28 UNF, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 3 Straight Flutes 2B Tolerance Grade

  • Specifications: M3×0.5, M4×0.7, M5×0.8, M6×1.0, M8×1.25, M10×1.5, M12×1.75 that you can use for tapping various threads..
  • Material: high speed steel 4241/ bearing steel, suitable for soft metal, such as aluminum plate, iron plate. High speed steel 6542, suitable for ordinary stainless steel and other hard materials..
  • Standard thread distance design, clear and tidy, no burr..
  • One set including 8 tools：M3 M4 M5 M6 M8 M10 M12 with Adjustable Tap Wrench 1/16-1/2''..
  • These machine hand taps are used for machining nuts or other common thread on the machine..
Check Stock