Ankmax USB4 Enclosure for NVMe M.2 SSD, UC4M2 USB4.0 Type-C 40Gbps Interface Compatible with Thunderbolt 4/3 USB4.0/3.1/3.0, Tool-Free Aluminum External Hard Drive Enclosure

  • 【40Gbps High Speed 】With USB4.0 Type-C output interface, it supports the maximum transmission speed up to 40Gbps. The UC4M2's read speeds up to 2505MB/s and write speeds up to 2,454MB/s. (Test Environment: 1TB PCIe4 NVMe SSD 980PRO, Macbook Pro. If the computer's SSD does not support the NVMe protocol, the best speed cannot be achieved) ).
  • 【Multiple Transmission Protocol 】UC4M2 adopts dual-chip master control, equipped with USB4.0 Type-C interface, compatible with Thunderbolt 4/3, USB4.0/3.1/3.0 interface, and supports M1 Pro/Max Mac devices and iPad Pro. Offers the best of both worlds high-speed storage for Thunderbolt and USB devices..
  • 【Only for NVMe M.2 SSD】The UC4M2 SSD Enclosure is specially designed for M Key & B+M Key NVMe SSD up to 8TB capacity. The applicable M.2 SSD size is 2280. A large-capacity external storage expansion device especially suitable for Macbook and other devices..
  • 【Built to be Cool and Durable】Thick aluminum alloy body, unique CNC processing technology, make the product cool and durable, can withstand a drop of up to 2 meters. The all-aluminum body has good heat dissipation performance, which helps to reduce the internal temperature and maintain the best performance of the SSD..
Check Stock

ACASIS USB C 3.2 SSD Enclosure for Apple Flash SSDs 12+16 PIN MacBook Pro,MacBook Air, Mac Pro, iMac from 2013 to 2017 Portable Storage Enclosure Compatible with M.2 Nvme SSD with Adapter

  • [More Compatibility] This USB C 3.2 SSD enclosure support for apple Mac SSD with 12+16PIN which was original factory-installed. NOT SUPPORT Toshiba 12+16PIN SSD and all SATA SSD. NOT compatible with Third-party SSDs, including OWC SSDs. Support M.2 Nvme SSD after installing the enclosed interface adapter..
  • [Faster Data Transmission] 10Gbps transmission speed with USB 3.2 Gen2 interface. Save and transfer data in a seconds. It can also reach 20Gbps transmission speed with USB 3.2 Gen2x2 if the computer supports..
  • [Friendly Design] Aluminum alloy case for quicker heat dissipation. ACASIS USB C 3.2 SSD enclosure is sturdy and portable..
  • [System Requirements] ACASIS USB C 3.2 SSD enclosure supports Windows7/8/10/11,Mac OS 10.0,Linux 2.6 or later.Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro.
  • [Easy Installation] Just take out the PCB board from the enclosure,then fully insert SSD to card slot of the PCB board, put PCB back into the enclosure,tighten the screws.Plug and play, support hot plug.On Windows OS, hard disk will not available on "This PC"/ "My computer.
Check Stock

USB C 3.2 SSD Enclosure for 12+16 Pin MacBook SSDs for MacBook Pro 2013-2015, iMac 2013-2015, MacBook Air 2013-2017, Portable Aluminum SSD Adapter with Adjustable Indicator for MacBook SSD

  • 【MacBook SSD Enclosure】This SSD enclosure is compatible with Apple original Mac SSDs with 12+16 Pins, NOT compatible with Toshiba 12+16PIN SSD,NOT Support for NVMe SSD, SATA SSD..
  • 【 Extreme Speed Transmission】 Type-C to c 10Gbps high-speed transmission with USB 3.2 Gen 1 interface, the perfect solution for data transfer and data backup. One HD movie transfer only takes 2-5 seconds..
  • 【Aluminum Shell & RGB Design】This SSD adapter for Mac adopts an aluminum alloy shell, slim design, and durable and excellent heat dissipation. High-effective system protects your SSD from overheating when trading large files. Adjustable RGB Light shows the data transfer status, cool and nice touch..
  • 【Support Operating System】 Support System Multi OS, Windows, Mac OS, Linux, Android.Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro.
  • 【Easy Installation】JUST Unscrew the four fixing screws on the cover with a screwdriver and remove the cover from the SSD enclosure. Insert the SSD into the card slot, then close the case and tighten the screw. It allows quick and easy installation. play and plug..
Check Stock

USB C 3.2 Enclosure for 12+16 PIN MacBook SSDs, PCle SSDs Enclosure Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro, 2014 Mac Mini

  • ✅【Applicable SSD】- -USB 3.2 Type-C SSD enclosure is Compatible for original and INDMEM 12+16 PIN MacBook SSDs. NOT compatible with Toshiba 12+16PIN SSD..
  • ✅【Outstanding Transmission】- -Type-C to c 10Gbps high-speed transmission with USB 3.2 Gen 1 interface,measured continuous reading and writing. Read speed up to 950MB/s, write speed up to 850MB/s,steady and efficient..
  • ✅【Easy Setup 】- -Tool-free design allows quick and easy installation of your SSD Enclosure Adapter, support plug and play and hot-swap.Less than 3 minutes to install SSD and plug in..
  • ✅【Support Operating System】- -USB C Enclosure SSDs Compatible for Mid 2013-2017 MacBook Air, Late 2013 - Mid 2015 MacBook Pro Retina, Late 2013-2017 iMac, 2013 Mac Pro, 2014 Mac Mini..
  • ✅【Aluminum Alloy Shell】- - Adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, reduced power consumption.be portable and easy to carry..
Check Stock

FLEANE MZ13C 1TB 1024GB PCIe NVMe SSD Compatible with 2013-2017 MacBook Air, 2013-2015 MacBook Pro, 2013-2017 iMac A1418 A1419, 2014 Mac Mini A1347

  • [Compatible with] MacBook Air A1465 A1466 Mid2013-Mid2017, MacBook Pro A1502 A1398 Late2013-Mid2015, iMac A1418 A1419 Late2013-Mid2017.There is a very detailed table of supported models in the listing images. Please check carefully.The EMC number is the best way to match.
  • [Important note] macOS 10.13 High Sierra (or later OS) must be installed on the Mac before installing the new ssd. These OS versions include an EFI firmware update for your Mac. Without the update, the new SSD will not be recognized..
  • [Write and Read] 1TB NVMe 3D TLC NAND PCIe 3.0 x4 SSD fast speed up to: Read 1850MB/S, Write 1400MB/S. 1: 1 design according to the original SSD interface, it provides a perfect upgrade solution for your Macbook Air/Pro/iMac without using adapter card. (Different models of machines may test different read and write speeds.).
  • [Item contains] 1 x 1TB SSD, 1 x 16GB USB Bootable Installer (with OS Big Sur), 2 x Screwdrivers, 1 x SSD installation guide card..
  • [About warranty] We provide 3-year worry-free warranty. If you have any other questions, please feel free to contact us, we will provide the most professional service.(Before replacing the SSD, please disconnect the battery cable from the mainboard, Otherwise the computer may be damaged).
Check Stock

MAIWO MacBook SSD Enclosure, Type-C to 12+16 PIN Apple Flash AHCI Hard Drive Adapter for 2013-2017 MacBook Pro, MacBook Air, Mac Pro, iMac, USB3.2 GEN2x2 Max 20Gbps

  • 【Compatibility】This External Hard Drive Enclosure for 12+16 PIN AHCI SSD is compatible with original 12+16 PIN MacBook SSDs including 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro, 2014 Mac Mini. (If you need this enclosure to support PCIe NVMe SSD, please make sure your NVMe SSD also supports AHCI and you need an adapter to connect it to this enclosure.).
  • 【20Gbps Transmission Speed】Equip with JMS586A chipset and USB 3.2 GEN2x2 output interface, the transmission speed can reach 20Gbps..
  • 【Excellent Heat Dissipation】This 12 16 pin mac ssd enclosure is made of aluminum alloy with CNC progress, very durable and compact, comes with a silicone pad for quicker heat dissipation to protect the hard disk..
  • 【Easy Installation】This 12+16 pin ssd adapter equips with screw and screwdriver. Just take out the ABS bracket from the enclosure, then insert SSD to the slot and fix it with screws..
  • 【Wide Application】Support Windows XP/7/8/10/11, Linux and Mac OS. Work with Desktop, Laptop, Xbox, PS5/PS4/PS3, Smart TV, Router, etc..
Check Stock

USB C Docking Station Dual 4K Monitor for MacBook Pro/Air, USB C Dock with 65W Power Supply, 10Gbps USB 3.1, SSD Enclosure, Docking Station with 2 HDMI,7 USB Ports, VGA, RJ45, SD/TF, Power Button

  • Plenty of Ports Apple Docking Station MacBook Pro: With a compatible Thunderbolt 3 MacBook Pro/Air, this docking station MacBook pro can charge your MacBook, and connect up to 2 extended monitors via HDMI or VGA. It also adds all of the following: multiple USB ports including USB C at 10 Gbps, USB A ports, USB 2.0 ports for your wireless devices, a Gigabit Ethernet connection, 3.5mm headphone, and microphone jacks, and even an SD/TF card slot to your MacBook.Plug-and-play MacBook Air dock for multi-monitor usage..
  • MacBook Pro Docking Station Dual Monitor with 65W Power Supply: This apple MacBook pro dock station comes with a 65W power supply, it charges your MacBook at about 58W with the provided charger using 7W to power to dock, which would provide you a stable charging for your MacBook and connected devices. If you use the original Apple USB-C charger it had a higher wattage of an 87W power supply, which charges at 79W. Because the PD port supports a max of up to 100W..
  • Up to 8TB of additional Capacity for your MacBook: This MacBook SSD enclosure is equipped with an SSD card slot (SSD Card not included) which can easily add up to 8TB of additional storage to simplify your work-from-home setup. SSD is very simple - just plug and play! M.2 SSD support....
Check Stock

M.2 NVME SSD Convert Adapter Card for Upgrade MacBook Air ( 2013-2017 )

  • ➤ This NVME SSD Convert Adapter is DIY kit for assembling a upgraded SSD replacement for MacBook with large capacity NVME SSD.
  • ➤ It is compatible with MacBook Air 11” A1465 & MacBook Air 13” A1466 (Mid 2013-2017), MacBook Pro (Retina) 13" A1502 & 15" A1398 (Late 2013 - Mid 2015), Mac Pro ME253 MD878.
  • ➤ Require macOS 10.13 High Sierra or Later.
  • DO NOT compatible with earlier than macOS 10.13 versions. Please use your original SSD to upgrades your macOS before installation.
  • ➤ Used to upgrade your storage capacity, perfect for tech enthusiasts, high-end gamers, 4K & 3D content designers.
  • ➤ Support M.2 NVME/AHCI SSD such as Samsung 960 EVO, Samsung 970 EVO/PRO, WD Black, Crucial P1, HP EX920, ADATA SX8200, Intel 600p series NVME SSD and so on.
Check Stock

Willhom M.2 NVME SSD Convert Adapter Card for Upgrade MacBook Air (2013-2017)

  • 1* M.2 NVME SSD Convert Adapter Card + 1* Screwdriver + 3* Screws included. The NVME SSD Convert Adapter is DIY kit for assembling an upgraded SSD replacement for MacBook with large capacity NVME SSD. ( DO NOT fit external SSD enclosure ).
  • Compatible with MacBook Air 11” A1465 & MacBook Air 13” A1466 (Mid 2013-2017), MacBook Pro (Retina) 13" A1502 & 15" A1398 (Late 2013 - Mid 2015), Mac Pro ME253 MD878.
  • Require macOS 10.13 High Sierra or Later, NOT compatible with earlier than macOS 10.13 versions( 2010 2011 2012 27’’ and 21.5’’ iMAC A1419 A1418). Please use your original SSD to upgrade your macOS before installation.
  • Support M.2 NVME/AHCI SSD such as Samsung 960 EVO, Samsung 970 EVO/PRO, WD Black, Crucial P1, HP EX920, ADATA SX8200, Intel 600p series NVME SSD and so on..
  • Tips: macOS failed on resume from hibernating with some NVME SSDs of some brands. Have to turn off laptop all the time instead of close the lid and go.
Check Stock

XtremeAmazing PCIe SSD to M.2 Key M Adapter Card, HDD Hard Drive Converter to PCIE M2 for MacBook Air Pro Retina A1465 A1466 A1398 A1502

  • For 2013 MacBook Pro retina A1398 A1502,Macbook Pro A1493 A1502.
  • For 2015 MacBook Pro retina A1502 A1398,MacBook Air A1465 A1466.
  • SSD formated in Mac OS system can’t be compatible with Microsoft system, so new SSD without partition, SSD can’t be shown in the table of “My Computer”, please use the Disk Manager in Windows to delete the old partitions and create a new partition.
  • For 2014 Macbook Air A1465 A1466 , MacBook Pro retina A1502 A1398.
Check Stock

USECL M.2 NVME SSD Hard Disk Convert Adapter Card for Upgrade MacBook pro or Air,Use ONLY 2013-2017 Year

  • NVME SSD Convert Adapter is DIY kit for assembling a upgraded SSD replacement for MacBook with enlarge large capacity NVME SSD.
  • Easy installation with a FREE screwdriver for upgrade.
  • It can’t support recovering from internet,important to prepare bootable USB disk driver,M.2 PCIe has no OS systerm inside,it must be erased first,DO NOT fit external SSD enclosure.
  • ATTENTION :DO NOT compatible with earlier than macOS 10.13 versions( 2010 2011 2012 year for 27’’ and 21.5’’ iMAC A1419 A1418). Please use your original SSD to upgrades your macOS before installation.
  • Support disk M.2 NVME/AHCI SSD such as Samsung 960 EVO, Samsung 970 EVO/PRO, WD Black, Crucial P1, HP EX920, ADATA SX8200, Intel 600p series NVME SSD and so on.
  • Make more M.2 NGFF drives available on the macbook,compatible with MacBook Air 11” A1465 & MacBook Air 13” A1466 (Mid 2013-2017), MacBook Pro (Retina) 13″ A1502 & 15″ A1398 (Late 2013 – Mid 2015), Mac Pro ME253 MD878.
Check Stock

JESOT NGFF M.2 NVMe SSD Convert Adapter Card for Upgrade MacBook Air 2013 2014 2015 2016 2017 and Mac Pro Retina 2013 2014 2015, NVMe AHCI SSD Upgraded Kit for A1465 A1466 A1398 A1502

  • [NVME SSD Adapter] - This NVMe SSD convert adapter is DIY kit for assembling a upgraded SSD replacement for MacBook with large capacity NVMe SSD.
  • [High Performance] - Used to upgrade your storage capacity, perfect for tech enthusiasts, high-end gamers, 4K & 3D content designers.
  • [Applicable SSD Hard Drive] - ONLY support PCIe NVMe based based M Key and B+M Key SSD (NVMe & AHCI), such as Adata NVMe SSD: SX6000, SX7000, SX8200, SX8200 Pro etc, Corsair : MP500, MP510, Crucial: P1, HP: ex920, ex950. Intel NVMe SSD: 600p, 660p, 760p, Toshiba XG3-XG4-XG5-XG5p-XG6 line, Samsung: 960 Evo, 960 Pro, 970 Evo, 970 Pro, WD: v1, v2 and v3, MyDigital: SBX - BPX. NOT support any SATA based SSD.
  • [Support System] - It is compatible with MacBook Air 11 “A1465 & MacBook Air 13” A1466 (Mid 2013-2017), MacBook Pro (Retina) 13 “ A1502 & 15" A1398 (Late 2013 - Mid 2015), Mac Pro ME253 MD878.
  • [Please Note] - Require Mac OS 10.13 High Sierra or Later.
  • DO NOT compatible with earlier than Mac OS 10.13 versions.
  • DO NOT support Samsung 970 Evo Plus, PM981, 950 Pro. Please use your ori....
Check Stock

Sintech 24pin to SATA Adapter with USB SATA Cable,Compatible with SSD from MacBook Air Pro 2012 Year NOT fit SSD from 2013-2015 Year

  • Alow 2012 Year macbook Air SSD to work as USB external Storage in desktop or laptop.
  • Alow 2012 Year and Early 2013 year macbook PRO Retina SSD to work as normal SATA SSD in desktop,Not Fit in laptopp.
  • Support SSD from 2012 year MACBOOK AIR MD224 MD223 MD231 MD232.
  • Support SSD from 2012-early 2013 Year MACBOOK PRO Retina MC975 MC976 MD976.
  • Notice: Before buy it, pls check if gold-pins of your SSD is 7+17pins,it can't fit 12+16pin SSD from 2013-2015 macbook..
Check Stock