Categories

Best Machine For Tapping

Threading & Tapping attachment-lathe tailstock die holder set Machine Tools MT2

  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
  • Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
  • Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
Check Stock

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

  • LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....
Check Stock

CoCud Thread Milling Taps 1/4-32 UNEF Thread 2B High Speed Steel Machine 3 Straight Flutes Screw Threading Tool - Applications for Tapping Drilling Machine 1-Piece

  • ★ Wide Application --- For threading through holes or shallow blind holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic..
  • ★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. Drill holes with a twist drill before tapping..
  • ★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications..
  • ★ Useful Tips --- Control speed based on material hardness. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). The tapping angle should be 90 degrees vertical and stable..
Check Stock

US STOCK SFX M16R M3-M16 Electric Tapping Machine 1200mm Arm 360° Universal Electric Tapper 0-375RPM/min With 9pcs ANSI Imperial Collets Tap Collets

  • ...ersal Workhead Servo Motor And Reducer ( One Set). Universal Joint(Tapping For a Vertical/Horizontal ) Tap Holder M3-M16 (One Set)9pcs ANSI Collets:1/4", 5/16", 5/32 ",1/16", 3/16 ",7/32 ",3/8", 7/16", 1/2"..
  • Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
  • Free Shipping.ETA:7-12 days.No Import Duty.1 year warranty.Customer and Technical Support.English User Manual and Demo Video offered with the machine.Returnable for Non-human-induced Malfunction Machine..
Check Stock

MXBAOHENG M3-M12 Pneumatic Tapping Machine Air Drill Tapper for Universal Flexible Arm Portable for Using Chuck Size: M3,M4,M5,(M6),M8,M10,M12 (400rpm)

  • 【Tapping Range】M3-M12, Bracket can be installed,bracket need to be prepared by yourself, suitable for pipeline mechanical tapping..
  • 【Application】This pneumatic tapping machine is applicable to all machinery manufacturing industry, machine tools, tooling machinery, plastic machinery, printing machinery, packaging machinery, engineering machinery, automobile and motorcycle parts, aircraft engines and other general purpose machinery industries. Tapping for copper, iron, aluminum, steel, stainless steel, plastic and wood, and other material..
Check Stock

uxcell M8x1.25mm Straight 4 Flutes Metric Bottoming Taper Hand Taps 3pcs

  • Tap Size: M12 x 0.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Metric Machine Tap M3 Thread 0.5 Pitch H2 3 Flutes Hex Shank High Speed Steel

  • Tap Size: M2 x 0.4 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

6Pcs 2-in1 Combination Drill and Tap Set TOPINCN Titanium Coated HSS Metric Hex Shank Screw Taps Tool Set

  • ¡¾HIGH QUALITY¡¿ - 100% brand new and high quality. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
  • ¡¾USE FOR TAPPING VARIOUS THREADS¡¿- There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
  • ¡¾SPIRAL FLUTES¡¿ - Taps are designed with spiral flutes and the chip clearing process would be better. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • ¡¾SMOOTH TAPPING¡¿ - They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
Check Stock

INTBUYING Pneumatic Air Tapping & Drilling Threading Machine Air Drill Tapper Flexible Arm (M3-M12 Tap Collets Vertical)

  • Tapping Ability of Pneumatic Tapping Machine: steel/aluminum: M3-M12, stainless steel: M3-M8, Range of Rotation: 400rpm(stepless speed regulation), Working radius:39.37"（1.0m）,Working pressure:0.6-0.8Mpa.
  • Pneumatic Tapping Machine: Avoid the limitations of manual tapping, time-saving and labor-saving, no damage to thread, and the tap is not easy to break. Wide range of activities, heavy workpiece do not need to be moved.Smaller gas pressure and gas (5-8Kg / cm2), large torque output..
  • Premium Quality: M3-M12 Pneumatic Air Tapper adopts high strength aluminum alloy, smooth running, low noise, stable performance, simplified operation. Clamping cylinder with overload protection device can avoid tap damage.
  • Applicable Materials: M3-M12 Air Tapper can be used for copper, iron, aluminum, steel, stainless steel, plastic, wood and other materials..
  • Heavier work matter does not need positioning device or mobile, installed plus universal head can easily get.Rapid fast positioning and high cutting speed, increased production capacity..
Check Stock

ATOPLEE 1pc Metric HSS 6542 Left Hand Thread Tap (M16x2.0)

  • {High Quality Material} The tap is made of HSS6542 material, which is stronger and more durable than ordinary taps..
  • {Size}Total Length:101mm,Shank Diameter:12mm,Pitch:2mm..
  • {Note}This is a small straight groove tap, which can be used for tapping of round through holes or shallow blind holes. Pay special attention to not being used for blind hole tapping..
  • {Widely Usage}Tapping can be done on stainless steel, iron, aluminum, copper, general steel and other materials. It can be used with manual equipment or special processing consoles, such as tapping machine, driller's integrated bench drill, CNC numerical control lathe, machining center, etc..
  • {Package Included} 1x Left hand Thread Tap.
Check Stock

uxcell Thread Milling Taps 7/16-14 UNC High Speed Steel HSS 4 Straight Flutes Machine Screw Thread Threading Tap 5 Length Extra Long

  • accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy..
  • High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping..
  • Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min.
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..
Check Stock

uxcell Thread Milling Taps 3/8-24 UNS High Speed Steel HSS 3 Straight Flutes Machine Screw Thread Threading Tap 5 Length Extra Long

  • accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy..
  • High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping..
  • Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min.
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..
Check Stock

uxcell Thread Milling Taps 1/2-13 UNC High Speed Steel HSS 4 Straight Flutes Machine Screw Thread Threading Tap 5 Length Extra Long

  • accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy..
  • High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping..
  • Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min.
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..
Check Stock