Categories

Best Machine Reaming Tool

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

  • Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • For semi-finishing and finishing operations.
Check Stock

OSCARBIDE 1/2 Round Shank 4 Pieces/Set Boring Bar Set,90 Degree with Indexable Carbide Inserts TCMT21.51 TCMT110204

  • OSCARBIDE Boring Bar Set ,1-1/4”to 2-1/2”Boring Depth ,7/16” to 1/2”Min Bore ,1-3/4” to 4” Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

QWORK Chucking Reamer Set, 8 Pcs HHS H8 Straight Shank Machine Chucking Reamer Milling Cutter, 3/4/5/6/7/8/9/10mm

  • ⭐The reamer set are made of high speed steel, high hardness and good toughness, long service life..
  • ⭐With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting..
  • ⭐This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
  • ⭐The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc.
Check Stock

PAGOW T Handle Taper Reamer, 5-16mm Tapered 6 Hand Held Fluted Chamfer Reaming, Repairman's Bridge Pin Hole Reamer Woodworker Cutting Tools

  • Material: Made of hardened ball bearing steel (#9027) with precision ground cutting edges..
  • Tapered Reamer Diameter:1/8"-1/2"(3-13mm).
  • T-Handle Grip: Provides greater leverage and easier reaming. Provides leverage for easier operation and rotation,saving effort. Removable handle for compact storage..
  • Perfect tool kit for every DIY users to enlarge holes in wood. Suitable for reaming taper holes on wooden boards,chamfering,deburring,easy to screw counterbore..
  • Precision machined cutting edges smooth metal surfaces with little effort. Useful tool for removing burrs from steel, brass, aluminum, plastic, wood and wallboard..
Check Stock

Pneumatic Drill Runs with Air Chuffs and Sputters

  • ECONOMICAL CHOICE: The IR 7807R Reversible Air Drill is a standard, economical pneumatic drill that’s best for service work requiring a compact, low....
  • APPLICATIONS: Use for drilling, reaming, or honing.
  • It's a durable, reliable tool for using on all types of materials, including sheet metal, wood and....
  • MAX POWER: Precision machine gearing ensures maximum power transfer and durability.
  • COMFORT + CONTROL: This air drill model is reversible with convenient control, has a comfortable lever throttle, and a durable Jacobs multi-craft....
  • GREASE PLUG: The drill features a grease plug for easy preventative maintenance.
Check Stock

T Handle Tapered Reamer Tool 3-13mm(1/8-1/2 ), 6 Fluted Chamfer Bridge Pin Hole Handheld Chaser, 45# Steel 1/4\ Hex Shank Durable for Chamfering Taper Holes Countersink Latches Guitar

  • CHAMFER REAMING TAPER REAMER: 3-13mm (1/8-1/2) six-blade taper reamer, taper hole, chamfer deburring and other functions, convenient for screw sinking, convenient and quick..
  • PURPOSE 1: Removal of burrs: remove from wood, cut pipes, pipes and ducts. Internal deburring edge tool, the capacity is 1/8" to 1/2"..
  • PURPOSE 2: Enlarged bridge pin hole, headstock, hole for tuner and volume/tone knob.
  • LABOR-SAVING AND CONVENIENT: T-shaped handles can provide leverage, making reaming easier, stronger control, and easier turning.
  • effortlessly processing in sheet metal, plastic and other materials..
  • SIZE: 45#steel, 1/4” Handle 85mm Length + 128mm Length Reamer 3-13mm Reaming diameter range..
Check Stock

OSCARBIDE 3/4 Shank 8 Pieces/Set Indexable Boring Bars,90 Degree Round Shank Boring Bars with Indexable Carbide Inserts 4 Pieces TCMT21.51 & 4 Pieces TCMT221

  • OSCARBIDE Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of item: B07Q2HNGVF & B07R6M1F3H.
Check Stock

GooM Inner-Outer Reamer,3/16-inch to 1-1/2-inch5mm-35mm) Pipe Reamer,Burr Remover for PVC Tubing,Tubing Chamfer Tool,PVC Pipe Deburring Tool,Red

  • Features 3-cutting edges,Ideal for reaming on copper,aluminum,brass and soft steel tubing.
  • Cutting edges on interior cone allow for fast clean inner reaming and outer deburring.
  • Sturdy plastic construction with stainless steel blades for extended tool life.
  • Pipe reamer has a 3/16-inch to 1-1/2-inch (5mm to 35mm) outside diameter capacity.
  • This Inner-outer reamers can be used for home use, plumbing applications or as a machinist tool in the shop.
Check Stock

RIDGID 29993 227S Stainless Steel Pipe Reamer Tool, 1/2-inch to 2-inch Inner/Outer Reamer

  • Ideal for reaming on stainless steel and copper tubing.
  • 45 cutting edges on the interior cone allow for fast, clean inner reaming and outer deburring and beveling of tubes.
  • Hardened steel construction for maximum durability.
  • dual inch and metric measurement bar for ease of use.
  • Pipe reamer has a 1/2-inch to 2-inch (12 mm to 50 mm) outside diameter capacity.
  • RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.
Check Stock

OSCARBIDE 5/8''by 8''Indexable Boring Bar Right-Hand Sclcr Boring Bar with CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Indexable Boring Bar Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE 1/2'' x 7''Indexable Boring Bar,Right-Hand Sclcr Boring Bar with Carbide Insert CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 1/2" Shank Diameter, Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
  • Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock