Categories

Best Machine Screw

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

uxcell M8 Hanger Bolts Length 2\(50mm) Double Headed Bolts Self-Tapping Screw 8mm Wood Joint Furniture Legs 8pcs

  • Wood Screw Thread Length: 12.5mm / 0.49".
  • Machine Screw Thread Length: 12.5mm / 0.49".
  • Material: Carbon Steel construction with zinc plated, provides great corrosion resistance and antirust ability for long service life..
  • Advantage: Good for wooden furniture jointing. Wood screw thread on one end and a machine screw thread on the other end..
  • Applications: Iron furniture, outdoor furniture, household furniture, stair post, wooden guardrail, solid wood furniture, custom furniture, office furniture..
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

El Tornillo Y La Tuerca

  • √ [More US Models, K Kwokker Phillips Round Head Machine Screws, More to Meet Your Various Needs] Slotted/Phillips Combo. Diameter thread size: #8-32, #6-32, #2-1/2. Thread coverage: full thread.
  • √ [More Quantity, More Economical, 651Pcs Truss Head Machine Screws, Bolts Nuts and Washer Assortment Kit] Includes: A.8-32 machine screw: Screw: 25pcs 8-32*1 1/2", 25pcs 8-32*3/4", 25pcs 8-32*1/2", 100pcs flat washers, 100pcs nuts.
  • B. 6-32 machine screws: Screw: 25pcs 6-32*1 1/2", 25pcs 6-32*3/4", 25pcs 6-32*1/2", 100pcs flat washers, 100pcs nuts.
  • √ [Reliable Zinc-Plated Steel. More Than 20 Years of Experience in Fastener Tool Production] Knob and Pull machine screws are zinc-plated steel construction. Zinc-Plated Truss Head Combo Drive Cabinet and Knob Screws will provide durability and corrosion resistance..
  • [Purpose] Assorted nuts and bolts suitable for common project applications: renovation, fence, storage, cabinet, frame and DIY projects. Commonly used in machinery and electrical appliances. Connect the knob or knob to the surface of the cabinet door or drawer..
  • √ [Come With A High Hardness Storage Box, Easy To Use And Stor....
Check Stock

BoltHold - SP12-38 Zinc Plated Steel Asphalt Anchor (5/8\ x 12\) - with 1\ Hex Bolt & Washer - Chemical Anchors - for Installation of Sheds, Carports, Bike Racks, & More - 2000 lb Pull Rated - 6 PK

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

HHIP 3902-4020 1/2\ Expanding Arbor, 3\ Length

  • Tighten expanding screw so that arbor expands 005 inch.
  • Machine arbor to Length and Size required.
  • Position part on arbor and tighten expanding screw.
Check Stock

K Kwokker 651Pcs #8-32#6-32#2-1/2 Machine Screw Phillips Pan Head Set Screws Assorted Nuts and Bolts and Washers, Cabinet Door and Drawer Screws

  • √ [More US Models, K Kwokker Phillips Round Head Machine Screws, More to Meet Your Various Needs] Slotted/Phillips Combo. Diameter thread size: #8-32, #6-32, #2-1/2. Thread coverage: full thread.
  • √ [More Quantity, More Economical, 651Pcs Truss Head Machine Screws, Bolts Nuts and Washer Assortment Kit] Includes: A.8-32 machine screw: Screw: 25pcs 8-32*1 1/2″, 25pcs 8-32*3/4″, 25pcs 8-32*1/2″, 100pcs flat washers, 100pcs nuts.
  • B. 6-32 machine screws: Screw: 25pcs 6-32*1 1/2″, 25pcs 6-32*3/4″, 25pcs 6-32*1/2″, 100pcs flat washers, 100pcs nuts.
  • √ [Reliable Zinc-Plated Steel. More Than 20 Years of Experience in Fastener Tool Production] Knob and Pull machine screws are zinc-plated steel construction. Zinc-Plated Truss Head Combo Drive Cabinet and Knob Screws will provide durability and corrosion resistance..
  • [Purpose] Assorted nuts and bolts suitable for common project applications: renovation, fence, storage, cabinet, frame and DIY projects. Commonly used in machinery and electrical appliances. Connect the knob or knob to the surface of the cabinet door or drawer..
  • √ [Come With A High Hardness Storage Box, Easy To ....
Check Stock

QWORK 2 Pack T8 600mm Lead Screw and Brass Nut (Acme Thread, 4 Starts, 2mm Pitch, 8mm Lead) Used in 3D Printer

  • 304 Stainless steel lead screw + Brass Nut..
  • T8 brass nut, with 4 holes to fix to the machine.
  • Lead Screw Length - 600mm, Lead Screw diameter - 8mm, Lead Screw spacing - 2mm..
  • Suitable for 3D Printer, stepper motor, machine tools, and other equipment..
  • Enjoy a smooth&worry-free return service within a month. Any questions feel free to contact us..
Check Stock

BIQU 300mm 8mm T8 Lead Screw Set Lead Screw+ Copper Nut + Coupler + Pillow Bearing Block for 3D Printer

  • ☘️【Material】Our stainless steel adopt high quality stainless steel, this lead screw is rust and corrosive resistant, durable and stable..
  • ☘️【Smooth Movement】It has low friction that helps the nut move smoothly on the lead screw. It also helps the lead screw work precise and accurate..
  • ☘️【T8 Brass Nut】 There are 4 holes on the T8 brass nut which can easy to fix to the machine..
  • ☘️【Bearing Pillow Block】Bearing Pillow Block have a certain bearing capacity, can hold in ordinary precision rack, strong adaptability, and widely applied..
  • ☘️【Widely Usage】 T8 lead screw can cover a wide usage in 3D printer, stepper motor and CNC 3D engraving machine and other DIY kit..
Check Stock

JUKI MO-6714S Industrial 4-Thread Overlock Sewing Machine

  • ✅Thank you! see below full info. on this machine,--- Get your sewing job done real fast with the Juki DDL-8700H sewing machine that can do up to 5500 stitches per minute. This Juki sewing machine has a large 11-inch arm space that lets you work with even large quilts. The stitch length of this 5500 SPM sewing machine goes up to 5mm which gives you a lot of freedom in doing your job..
  • ✅The sewing machine complies with the "Juki Group Green Procurement Guidelines" on the use of hazardous substances, will be delivered in 3 boxes. 1) machine head, & some accessories* 2) servo motor & v belt 3) table top/legs/drawer/*2 spool-Thread Stand Bobbin Winder Oil Pan/Knee Lifter 1 Bobbins 1 Needles Instruction Manual Screw Driver Machine Oil 2-Euro Hinges & 2 Euro Rubber Mounts Table Rest Pin Safety Belt Guard.
  • ✅1) machine head, & some accessories* 2) servo motor & v belt 3) table top/legs/drawer/*2 spool-Thread Stand Bobbin Winder Oil Pan/Knee Lifter 1 Bobbins 1 Needles Instruction Manual Screw Driver Machine Oil 2-Euro Hinges & 2 Euro Rubber Mounts Table Rest Pin Safety Belt Guard.
Check Stock

ReliaBot 2pcs 400mm T8 Tr8x8 Lead Screw and Brass Nut (Acme Thread, 2mm Pitch, 4 Starts, 8mm Lead) for 3D Printer Z Axis

  • 3D engraving machine lead screw 200mm length with nut.
  • Lead Screw are widely used for machine tools, like 3D printing.
Check Stock

Adjustable Furniture Levelers Screw Stainless Steel Screw Leveling Feet 1/4' Threaded Screw Table Levelers Chair Levelers Furniture Feet for Table Chair Cabinet Patio Furniture Legs-12 Packs

  • [Stainless Steel Furniture Leveler Screw] Made of real stainless steel,this 1/4 inches-20 UNC threaded screw is anti-rust and anti-corrosion, offering you a long servie life.Widely used in furniture table, chair,cabinets,washing machine base,bathroom cabinets,outdoor patio furniture and more.[This is a small screw leveler, please check before you purchase!].
  • [Standard Size] This stainless steel 1/4 Inches-20 UNC thread furniture feet screw has a shaft that is 3/4"(0.75 inches) long. The diameter of the nylon base is 0.6 inches.(1/4"-20 UNC thread is a common size for American made furniture. If you are unsure about your furniture size,you can ask local hardware store to help you identify the correct replacement size.).
  • [Easy To Use] Simply screw in the leg leveler to adjust the height.Or pre-drill a 1/4" hole,screw in the levelers and adjust to the desired height.This furniture leg screw can adjust tables and chairs easily to keep balance,keep your furniture and floors from being scratched and damaged, reduce noise while moving furniture..
  • [Strong Protective Base] These furniture leveling feet have a non marking nylon base with special anti-slip design for easier & more accurate height adjustment. They will not leave marks on your floor surface..
Check Stock