Categories

Best Machine Screws Passivated

Stainless Steel Replacement Allen AR Grip Screw with Interior Washers - Set of 4 - Black Oxide Coated

  • Mil-spec Passivated Black Oxide Allen (4).
  • Hex Key Size: 3/16", high grade zinc plated steel tooth interior lock washers included.
  • Great replacement for slotted / hex screw on rifle platforms.
  • Compatible with A2 and aftermarket including B5, BCM, Ergo, Hogue, and Magpul grips.
  • All screws, packaging and material made to last!.
Check Stock

Stainless Steel Replacement Allen AR Grip Screw with Exterior Washers - Set of 4 - Black Oxide Coated

  • Mil-spec Passivated Black Oxide Allen (4).
  • Hex Key Size: 3/16″, high grade zinc plated steel tooth lock washers included.
  • Great replacement for slotted / hex screw on rifle platforms.
  • Compatible with A2 and aftermarket including B5, BCM, Ergo, Hogue, and Magpul grips.
  • All screws, packaging and material made in the USA.
Check Stock

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

  • ...t offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..
Check Stock

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • ...t offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..
Check Stock

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • ...t offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..
Check Stock

890pcs M6 M5 M4 M3 Metric Screw Assortment,Metric Bolts and Nuts Kit（with Lock&Flat washers・Wrenches）Socket Head Cap Screws 304 Stainless Steel Hex Head Metric Screws Assortment Set with Case

  • ...ts, nuts and lock&flat washers，4*10mm & 4*20mm self tapping screws. Includes 8mm 12mm 16mm 20mm M3 M4 M5 M6 metric bolts assortment..
  • 【Bolts and nuts kit - High quality】Made of high quality 304 Stainless Steel, This product has passed the international stainless steel inspection.No rust for 50+ years，Passivated Surface，reinforced rust resistance, please feel free to use it in humid and high temperature environments..
  • 【Metric bolt kit - 2-year warranty】Our products have undergone several quality checks and many tests and come with a 2-year warranty! If you need assistance, please contact us by email or Q&A. Money back or exchange. Accept Customization.Satisfaction guaranteed..
  • 【Metric Bolts and Nuts Kit - Wide Application】 Widely used in bicycle, furniture, car license plate, automobile, electrical connections on the power source of household and commercial appliances, and other places of indoor or outdoor..
  • 【Metric screws - Package】1. Screw sorting box Wrop in bubble film.
  • 2. Then wrap into a special screw outer box.
  • 4. Three layers of protection, so that the exquisite products can be delivered to your hands intact..
Check Stock

J.W. Winco 6NXF2/A DIN71802 Ball Joint, 10 mm Diameter, M6 x 1.0 Tapped Right Hand Thread, M6 x 1.0 Threaded Shank, 12.5 mm Thread Length

  • M6 x 1.0 Threaded Shank, 12.5mm Thread Length.
  • Housing and Threaded Shank: Steel, Zinc - Plated, Blue Passivated Finish.
  • Ball: Hardened, Ball Socket: Lubricated, Hex Nut: Metric, ISO 4032, Steel, Zinc-Plated, Blue Passivated Finish.
Check Stock

NINDEJIN 910pcs M3 Male Female Hex Brass Standoff Spacer with Pan Head Screw Nut and Washer Assortment Kit PCB Motherboard Standoff Screw Nut Assorted Kit

  • ...e to female hex brass standoff spacer, with pan head screw, hex nut, washer, it's convenient for your electronics working, such as printed circuit board and motherboard..
  • [Quality of Standoff Screws]: Standoff spacers are made of brass, screw, nut and washers are nickel-plated, have good corrosion resistance and are passivated for enhanced protection. They may be mildly magnetic. The flat sides of the hex ensure a firm grip when tightening with a wrench..
  • [Motherboard Standoff Screw Using]: In electronics, they are frequently used to raise a printed-circuit board above a surface. Standoffs are ideal fasteners for keeping printed circuit boards both stationary and elevated away from surfaces, such as the interior of a computer chassis..
  • [Standoff Screw Nut Assorted Kit Package ]: Included Male-female, Female-female series, Hex nuts, and flat washers. These fasteners stored in a transparent plastic box, convenient for your storage and use..
  • [NINDEJIN After-sales Service]: If you have any problems with NINDEJIN screws assortment kit, please contact us by email or Q&A, we will give you a professional service and reply to you within 24 hours. We will provide Lifetime technical supports and the best customer service..
Check Stock

ROOWINTOO 20Pcs of recessed Light Clips for retrofitting recessed Light canisters, Downlight recessed Light Clips for use with Torsion Springs

  • Recessed light clips are used to retrofit 5-6 inch retrofit cans, ideal for downlight retrofits, which can help you save a lot of money on replacing and repairing light bulbs..
  • Installation method: The recessed light clip of the light tube is equipped with self-tapping screws, which can be easily drilled into the recessed light tube to replace the missing or damaged C-type clip hook of the light tube shell..
  • The recessed light clip is made of high-quality metal, which is not easy to bend, and is treated with galvanized process without rust, and the corners are passivated..
  • 2+1: Two dots with grooves can fit the downlight installation more closely and fit the arc design of the concave can downlight..
  • We Guarantee: Full-refund with any dissatisfaction. With any question, please contact us. We offer quality service..
Check Stock

MNNSOSE Pivot Bushing System 6061 Aluminum Integral Channel Handle with Replaceable Bushing, Stainless Steel Bottle Opener – Green

  • 【Bushing Pivot System】Effective bushings system, the pivot can be tightened with no binding and no gap, professional adjustment brings amazingly smooth flip, ultra smooth and quiet performance gives a satisfying flip experience.
  • 【Aluminum Channel Handle】Made of 6061 aircraft-grade aluminum, strong and light enough to have a good balance to adapt to various maneuvering styles. Both sides are designed with non-slip texture, hard anodic oxidation coloring process, resistant to wear and tear and not easy to fade.
  • 【Stainless Steel Blade】Passivated high quality stainless steel with a stonewashed finish for a safe and sharp free finish. CNC skeletonized for optimal balance and weight reduction for all maneuvering styles. Combines the function of a bottle opener, both a fun toy and a reliable tool.
  • 【Safe & Portable】Perfectly balanced, light weight and easy to carry, friendly harmless looking face, it is perfect for flip on the bus, walking to school, or any other public area.
  • 【Size Information】Full length 9.75″, handle length 5.5″, handle thickness 0.5″, weight 4.25 oz. Comes with spare part bag: Steel bushings, Torx screws, Bronze washers, Screwdriver, Glue. If you have any questions, please let us know.
Check Stock

Chicken Nesting Box, LIVOSA 6 Holes Metal Poultry Nest Box for Chickens, Hens, Ducks Laying Eggs, Rust Proofed Construction with Large Vented Holes

  • 【GET EGGS】Chicken Nest Boxes are a must-have for all poultry lovers looking to start or maintain their sustainable, ecological and homegrown farm..
  • 【OUTSTANDING DETAIL】The sloping roof design prevents hens from perching on top of the nesting box. Numerous vents in the bulkhead provide fresh airflow. And the four bottom feet can increase the height of our chicken egg box to avoid dampness..
  • 【EDGE PASSIVATED DESIGN】Our laying hen boxes have six holes to suit your needs. With passivation, the smooth edges protect you and your chickens from harm..
  • 【PREMIUM MATERIAL】This chicken coop is made of rust-proof hot-dip galvanized steel, durable and easy to clean. The smooth surface ensures the comfort of your chickens..
  • 【EASY INSTALLATION】Comes with screws, bolts and a pair of gloves for easy assembly. All you need is a flat-blade screwdriver and an adjustable wrench, follow the installation steps, and you'll have a complete chicken coop in no time..
Check Stock

POPANU LED Canless Recessed Downlight Ultra-Thin 6 Inch 5 CCT Adjustable Ceilling Light with Junction Box, 12W Color Temperature Selectable Lighting Fixture, Dimmable, 6 Pack, Brushed Nickel

  • Recessed light clips are used to retrofit 5-6 inch retrofit cans, ideal for downlight retrofits, which can help you save a lot of money on replacing and repairing light bulbs..
  • Installation method: The recessed light clip of the light tube is equipped with self-tapping screws, which can be easily drilled into the recessed light tube to replace the missing or damaged C-type clip hook of the light tube shell..
  • The recessed light clip is made of high-quality metal, which is not easy to bend, and is treated with galvanized process without rust, and the corners are passivated..
  • 2+1: Two dots with grooves can fit the downlight installation more closely and fit the arc design of the concave can downlight..
  • We Guarantee: Full-refund with any dissatisfaction. With any question, please contact us. We offer quality service..
Check Stock

El Tornillo Y La Tuerca

  • √ [More US Models, K Kwokker Phillips Round Head Machine Screws, More to Meet Your Various Needs] Slotted/Phillips Combo. Diameter thread size: #8-32, #6-32, #2-1/2. Thread coverage: full thread.
  • √ [More Quantity, More Economical, 651Pcs Truss Head Machine Screws, Bolts Nuts and Washer Assortment Kit] Includes: A.8-32 machine screw: Screw: 25pcs 8-32*1 1/2", 25pcs 8-32*3/4", 25pcs 8-32*1/2", 100pcs flat washers, 100pcs nuts.
  • B. 6-32 machine screws: Screw: 25pcs 6-32*1 1/2", 25pcs 6-32*3/4", 25pcs 6-32*1/2", 100pcs flat washers, 100pcs nuts.
  • √ [Reliable Zinc-Plated Steel. More Than 20 Years of Experience in Fastener Tool Production] Knob and Pull machine screws are zinc-plated steel construction. Zinc-Plated Truss Head Combo Drive Cabinet and Knob Screws will provide durability and corrosion resistance..
  • [Purpose] Assorted nuts and bolts suitable for common project applications: renovation, fence, storage, cabinet, frame and DIY projects. Commonly used in machinery and electrical appliances. Connect the knob or knob to the surface of the cabinet door or drawer..
  • √ [Come With A High Hardness Storage Box, Easy To Use And Stor....
Check Stock