Categories

Best Machined Cylinders

NEW SOUTHWEST SPEED RACING BRAKE & CLUTCH PEDAL ASSEMBLY WITH MASTER CYLINDERS & BALANCE BAR, REVERSE SWING MOUNT, SHORT 5 TO 1 RATIO

  • Brand New Southwest Speed Short Reverse Swing Mount Brake & Clutch Pedal Combo Kit With 3 Aluminum Master Cylinders (SWS Part # 301-2663). This combo is very similar to the Wilwood Part # 340-4828X3, only about $50 cheaper..
  • Southwest Speed High Volume Aluminum Master Cylinders | * High pressure die-cast from high-grade aluminum, fully machined and assembled with extreme precision * Features the highest fluid capacity of any integral reservoir design * With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands * More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long runs.
  • Kit includes: | * 1 - Reverse swing mount dual pedal, short design, 5:1 ratio (# 301-266) * 1 - Aluminum clutch master cylinder, 3/4" bore (# 301-290) * 1 - Aluminum brake master cylinder, 7/8" bore (# 301-291) * 1 - Aluminum brake master cylinder, 1" bore (# 301-292).
  • Find more Pedals as well as many other high performance auto parts by visiting the Southwest Speed Amazon Store..
  • Southwest Speed Dual Brake and Clutch Pedal | * This pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside t....
Check Stock

Brazing and Soldering Kit

  • Professional torch kit used in Plumbing, HVAC, Refrigeration and heating applications.
  • Kit includes Target Tips that solder and braze copper or steel pipe faster than conventional tips.
  • Heavy brass regulator, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
  • Also includes: HA3-12-Feet (A) hose, GG-4 quick disconnect handle, MA-2 cylinder wrench and EA-1G brass regulator for B acetylene cylinders.
Check Stock

JET JHJ-12-1/2, 12-1/2-Ton Hydraulic Bottle Jack (453312)

  • Stable Platform: Heavy-duty base is electrically welded..
  • Added Safety: Complies with ANSI/ASME B30.1 and PALD-1 standards..
  • Leak-Free Performance: Precision-machined and polished cylinders..
  • Extreme Climates: Operating temperature range from -4°F to 158°F..
  • Increased Versatility: Upright, horizontal, or angled operating positions..
Check Stock

A-Team Performance - Complete Distributor - Compatible with Chevy GM EFI VORTEC 1996-2002 Small Block 5.0L 5.7L 305 350 Tahoe C1500 K1500 C2500 K2500 Black Cap

  • EFI Vortec 1996-2002 Complete Distributor replacement for stock units with improved features such as Zinc-coated steel hold down clamp for a secured fit.
  • Compatible With Chevy / GM 5.0 L / 305 in3 commonly referred to as Vortec 50005 and .7 L / 350 in3 commonly referred to as Vortec 5700.
  • CNC-Machined — High-quality EFI distributor with CNC-machined aluminum housing, steel internal, and chromoly steel gear material construction.
  • Specification - Magnetic Pick-Up Trigger, Computer-Controlled Advance Type, Crab-Style Female Cap, and 6 Cylinders.
  • Direct replacements for stock units, but with improvements throughout.
Check Stock

Sadlak Industries M14 Aluminum Scope Mount

  • The aluminum edition is machined from CNC from a density of ½ aircraft quality aluminum (6061), treated using heat. The material which is denser as....
  • Extra Big Wrench For gas cylinders created abroad, we provide an edition which is extra big, just in an aluminum thickness of ½ and olive drab color..
  • Drill Set for Cleaning The drill set for cleaning consists of drill 180 dia No. 15 and .323 dia Letter ‘P’ for rubbing off carbon deposits from....
  • Plug Cleaning Drill for Gas Cylinder (Dia .316 Letter ‘O’ Drill) Following extraction of the gas plug by utilizing Gas Cylinder Wrench from Sadlak....
Check Stock

Harris 45KPOP Brazing Kit, 1225-1370 F, w/1.75 oz Flux

  • Professional torch tool kit used in Plumbing, HVAC, Refrigeration and heating applications.
  • Kit includes Target Tips that solder and braze copper or steel pipe faster than conventional tips.
  • Heavy brass regulator, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
  • GA-3 tip soft solders up to 1-Inch. GA-11 soft solders up to 3-Inch. Compare with Turbo Torch.
  • Also includes: HA3-12-Feet (A) hose, GG-4 quick disconnect handle, MA-2 cylinder wrench and EA-1G brass regulator for B acetylene cylinders.
Check Stock

MILLION PARTS Exhaust Stainless Shorty Manifold Headers with Bolt Small Block Compatible with Chevy SBC 350 SDD-HDSSBCSB AGS0077

  • Precision machined steel flanges that provide a tight seal at the head and allows a high flow rate through the primary tubes.
  • Reduce the exhaust resistant, avoid interference between cylinders, can improve the efficiency of the engine.
  • NOTICE - PLEASE PUT YOUR VEHICLE MODEL in "Your Garage" and it will verify the fit..
Check Stock

MILLION PARTS Exhaust Manifold Header Compatible with Chevy Small Block SB V8 262 265 283 305 327 350 400 SDD-HDSCC63 AGS0075

  • Precision machined steel flanges that provide a tight seal at the head and allows a high flow rate through the primary tubes.
  • Reduce the exhaust resistant, avoid interference between cylinders, can improve the efficiency of the engine.
  • NOTICE - PLEASE PUT YOUR VEHICLE MODEL in "Your Garage" and it will verify the fit..
Check Stock

Goss KX-5B Soldering Brazing Torch Kit for \B\ Acetylene Tanks with GA-5 Target Tip with Hot Turbine Flame

  • Professional torch kit used in Plumbing, HVAC, Refrigeration and heating applications.
  • Kit includes Target Tips that solder and braze copper or steel pipe faster than conventional tips.
  • Heavy brass regulator, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
  • GA-3 tip soft solders up to 1-Inch. GA-8 soft solders up to 2-Inch. Compare with Turbo Torch.
  • Also includes: HA3-12-Feet (A) hose, GG-4 quick disconnect handle, MA-2 cylinder wrench and EA-1G brass regulator for MC acetylene cylinders.
Check Stock

Goss KX-6MC Soldering Brazing Kit for \MC\ Acetylene Tanks with GA-3 and GA-8 Target Tips and Hot Turbine Flame

  • Professional torch tool kit used in Plumbing, HVAC, Refrigeration and heating applications.
  • Kit includes Target Tips that solder and braze copper or steel pipe faster than conventional tips.
  • Heavy brass regulator, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
  • GA-5 tip soft solders up to 1 1/2-Inch. GA-14 soft solders up to 4-Inch. Compare with Turbo Torch.
  • Also includes: HA3-12-Feet (A) hose, GG-4 quick disconnect handle, MA-2 cylinder wrench and EA-1G brass regulator for B acetylene cylinders.
Check Stock

Zebra DNA Luxfer L6X Aluminum CO2 Tanks with CGA320 on/off Valve (Natural, 5 LB)

  • Cylinders are made from Luxfer’s exclusive L6X® alloy, a proprietary version of 6061-T6 specially optimized by Luxfer metallurgists to improve its durability, fracture toughness and resistance to tearing and cracking. More than 40 million L6X cylinders in service around the world have an exemplary record for safety and dependability..
  • Highly corrosion-resistant interior and exterior—ideal for wet gases.
  • Cylinders perform well at low temperatures..
  • Lightweight––up to 40 percent lighter than comparable steel cylinders..
  • Cylinders meet or exceed all regulatory standards worldwide..
  • Luxfer’s exclusive “Safety First” training program that provides manuals, inspection guides, safety bulletins, reference materials, shop posters, videos and other training materials free of charge to promote safe use, storage and inspection of aluminum beverage cylinders. Consistent with Luxfer’s position as the world’s leading manufacturer of high-pressure aluminum gas cylinders, educational offerings are available in multiple languages and formats..
  • Cylinders cycle-tested in excess of 100,000 cycles at service pressure..
  • Minimum burst pressure tested to 2.5 times service pressure without failure....
Check Stock

MOSTPLUS 11127522159 Engine Valve Cover w/Gasket Hardware LH Driver Side Compatible for BMW 5 6 7 Series X5 Cylinders 5-8

  • Fitment: Compatible with 2004-05 BMW 545i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2006-10 BMW 550i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2004-05 BMW 645Ci Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2006-10 BMW 650i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2002-05 BMW 745i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2002-05 BMW 745Li Driver Side Cylinders #5 - 8 Valve Cover.
  • Package Includes: 1 x Engine Valve Cover Set(.
Check Stock

A-Team Performance - Complete HEI Distributor 65K Coil 7500 RPM - Compatible With Chevrolet Chevy GM GMC Truck Late Model Inline 6 Cylinder 230 250 292 One Wire Installation Red Cap

  • Complete HEI Distributor 65K Coil 7500 RPM One Wire Installation Red Cap.
  • Compatible with Chevrolet Chevy GM GMC Truck Late Model Inline 6 Cylinder 230 250 292 , Cast Iron Hydraulic or Solid Flat Tappet Camshafts.
  • Heavy Duty — Complete HEI Distributor constructed from CNC-machined billet aluminum housing and hardened steel dual bushing construction built to....
  • Specifications — Magnetic Trigger Style, Mechanical and Vacuum Advance Type, Male Cap Style, Internal Coil Type, and 6 Cylinders.
  • Coil Spark of 7,500 RPM — High voltage of up to 65,000.
Check Stock