Categories

Best Machined Pin Header

ALITOVE Addressable RGB LED Strip for PC , 5V WS2812B Rainbow Digital Light Strip for ASUS AURA SYNC, MSI MYSTIC LIGHT SYNC, ASRock POLYCHROME RGB 3 pin 5V ADD Header on Motherboard, 40cm 24 LED, 2pcs

  • Designed for motherboard with 5V 3pin ADD_HEADER ALITOVE Addressable RGB LED strips are compatible with ASUS Aura Sync, MSI Mystic Light Sync and ASRock POLYCHROME RGB motherboards with 3 pin +5V ADD_Header (+5V,DATA,N/A,GND). Please NEVER connect it to 4pin 12V RGB_HEADER (12V, G,R,B). Otherwise you will destroy the entire led strip..
  • Individually Addressable RGB LED Strip ALITOVE WS2812B LED strip allows for control of each individual LED to display colors independently for nearly unlimited combination of colors and gradients. When attached to motherboards with +5V 3-pin addressable RGB support, it can display many cool dynamic color effects, such as rainbow, wave, breathing,strobing,gradual change, color cycle, comet, music sync etc..
  • User-friendly Design The full kit comes with all the essential parts you may need for your computer. All in one kit, just hook them up, plug and play. Chainable design, you can expand the length by adding more strips. 3M VHB Heavy-duty foam adhesive tape on the back, easy to install..
  • A must have for PC DIY illumination ALITOVE Digital Rainbow LED Strip takes PC DIY illumination to the next level with addressable RGB LEDs, increasing lighting possibilities with multiple colors on one strip. It comes with high build qual....
Check Stock

Airgoo PWM ARGB Fan Hub, 8 Fan Ports with pwm Temperature Control sync with Motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Powered

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

9pin USB Header Male 1 to 2 Female Extension Splitter Cable Connector Adapter Male 1 to 2 Female

  • This listing is for 1pc multiplier, One connect to motherboard 9pin(10pin) port, Split to 2x 9-Pin(10-pin).
  • Connector(s) B: 2X 9Pin USB Header Female.
Check Stock

Airgoo PWM ARGB Fan Hub, 2022 New Upgrade 8 Fan Ports with pwm control sync with motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Power

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

USB Front Panel Adapter, JoyReken Vertical USB C Header Adapter, USB 3.1 Type-E Key-A to USB 3.0 20Pin Header Converter for Type C Motherboard

  • Supports all motherboards with USB 3.0/ 3.1 19-pin header.
  • Motherboard: USB 3.0 Internal 19 Pin MB Male Housing Header.
  • Front Panel: USB 3.1 A-Key 20 Pin Front Panel Female Header / NOTE: Does not convert from 5GB/s to 10GB/s.
  • Easy way to access USB-C and support front panel header, doesn't require to have latest motherboard to experience USB-C technology..
  • ** Note on USB current over limit issue: The power from the USB 3.0 header on the motherboard has a power rating at 4.5W (0.9A x 5V). However, many USB-C devices can withdraw power up to 100W (20A x 5V). This may result in a power shut down to protect the motherboard and its components..
Check Stock

Cooler Master R4-ACCY-RGBS-R2 1-to-3 RGB Splitter Cable for LED Strips, RGB Fans, 5pcs 4-Pin Header Computer Cases, CPU Coolers and Radiators RGB Fans

  • Extend Multiple RGB LED fans and LED Strips.
  • Flexible 58 cm or 22.83 inches in Length for Cable Routing.
  • 5-pin and 4-pin RGB Header Compatibility.
  • Both 4-pin RGB Header and 5-pin RGBW Header Without Requiring Any Adapter.
Check Stock

Cable Matters 2-Pack 3 Way 4 Pin PWM Fan Splitter Cable - 12 Inches

  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans.
  • PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans.
  • PWM fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans.
  • 3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans.
  • Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer.
  • Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with t....
Check Stock

ZYAMY 10pcs 2.54mm 40Pin Round Female Socket Pin Header Strip 1x40P Single Row Straight Female/Male Socket/Pin Header Strip Connector Black

  • Type: 2.54mm 40 Pins Single Row Straight Round Female Socket Pin Header Strip.
  • Use: Be widely used in Arduino Electronic DIY, such as: electronic circuit, electrical appliances, instrumentation ,PCB circuit board etc. electronic project..
  • Package: 10pcs 40 Pin Black Round Female Socket Pin Header.
Check Stock

upHere 3-Pack High Airflow Quiet Edition White LED Case Fan pwm 4in for PC Cases T4WT4-3

  • PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
  • 1 to 2 case fan splitter connects an additional fan to....
  • Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using....
  • Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed....
  • Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
  • Sleeved and wrapped black 4-inch PWM Y cable provides a....
  • 3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler....
Check Stock

60 Pieces Breakaway Pin Header, 40 Pin 2.54mm Straight Single Row Male Pin Header Connector for Arduino Prototype Shield

  • Break Away Headers: Pcb pin head is a straight single row connector, the size of pin pitch is 2.54mm/0.1 inch and there are totally 40 number of pins on each..
  • Easy to Cut: Our male pin header connectors can be cut to different lengths according to your needs, easy to break off and solder on..
  • Electric Component: The pcb pin strip plays the function of bridge in the circuit, and takes up the task of current or signal transmission. It is one of the indispensable components of PCB board and circuit board..
  • Wide Application: Straight single row male pin header is widely applied in the computer and breadboard, suit for Arduino, Raspberry pi and other electronic projects..
  • What You Get: Comes with 60pcs male header connecter strips, sufficient quantity to meet your different needs..
Check Stock

Cable Matters 2-Pack 2 Way 4 Pin PWM Fan Splitter Cable - 4 Inches

  • PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
  • 1 to 2 case fan splitter connects an additional fan to increase airflow in your computer case.
  • Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
  • The computer fan splitter omits the RPM signal pin for tandem fan speeds with both fans.
  • Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
  • Sleeved and wrapped black 4-inch PWM Y cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler Master Blade Master 80 / Master 92, Cooler Master Hyper 212 EVO 120mm, Cooler Master JetFlo 120mm, Cooler Master SickleFlow 120mm, Cooler Master MegaFlow 200mm, Noctua NF-F12, Thermaltake WATER 3.0 Dual 240.
Check Stock

ARGB Splitter Cable, 1 to 3 ARGB Extension Cable, 5V 3 Pin Addressable RGB Splitter Cable with 3 Pin Connector for Computer Chassis, CPU Cooler and 5V ARGB Fan, 11.8 Inches, 2 Pack

  • Package: 2PCS of ARGB 1 to 3 splitter cable 5V 3-pin (11.8 Inches), 8PCS of 3 Pin Connectors..
  • Function: ARGB splitter cable allows to extend and connect its addressable ARGB LED or ARGB fan through a single motherboard +5V 3 pin ARGB header. Addressable RGB - ARGB Splitter Extension Cable compatible with 5050/3528 RGB LED strip lights or ARGB fans..
  • Material: Genuine new copper cores, no recycled materials..
  • ARGB splitter cable compatible with ASUS, MSI, GIGABYTE and ASROCK addressable RGB motherboards..
  • Note: Only supports 3 pin 5V addressable rgb motherboard header, does not support 4 pin 12V RGB header..
Check Stock

Mill Max 310-43-164-41-001000 Sip Socket, 64Pos, Through Hole

  • Total Size : 101 x 8.5x 7mm/ 4"x 0.33"x 0.28"(L*W*H).
  • Package Content : 10 x Right Angle Pin Header.
Check Stock