Categories

Best Machinery Brass Parts

12 Pieces Wire Brush (Stainless Steel + Brass) Scratch Brush, Curved Handle Masonry Brush Wire Bristle for Cleaning Welding Slag and Rust

  • 6 Pieces Stainless Steel Wire Brushes: wire brush handle length is 13 cm or 5.1 inches, the brush head length is approx 4 cm or 1.6 inches, and the brush head width is 1 cm or 0.4 inch.
  • 6 Pieces Brass Wire Brush: large size brush handle length is 13 cm or 5.1 inches, the brush head length is approx. 4 cm/ 1.6 inches, and the brush head width is 1 cm or 0.4 inch.
  • Durable Material: Stainless steel and Brass copper each 6 pieces, strong and durable, can clean rust and detail completely, Hang up hole for convenient storage.
  • Wide application: welding wire brushes are suitable for cleaning steel parts, machinery, the unfinished metal parts, paint stains, special corrosion without damaging surfaces or fine features.
Check Stock

Ram-Pro Stainless Steel Wire Brush for Power Drill Impact Brass Driver - Cleaning Brush Hex Shank

  • ...le Material: Stainless steel + Brass copper, strong and durable, can clean rust and detail completely, Hang-up hole for convenient storage..
  • ✓ Design: Designed for easy access into narrow holes and confined areas, Designed for use on right angle grinders. welding wire brushes are suitable for cleaning steel parts, machinery, the unfinished metal parts, paint stains, special corrosion without damaging surfaces or fine features.
  • ✓ USES: Innovative spiral knotted wires construction for a narrow face and precision deburring, rust, spatter and paint removal, surface conditioning and preparation. Wire brushes are made of brass, stainless steel, strong and durable, can clean rust and detail completely..
Check Stock

TUFF-Blast Neoprene Gloves for Sandblasting Sandblaster Sand Blast Cabinet - 6\ x 24\ Made in USA

  • Sandblaster Nozzle Assembly: Includes two high quality ceramic tips, nozzle seat and a brass NPT ball valve with a 1/2" connector for long life..
  • Alumina Ceramic Nozzles: Our secret to longer blasting times is to use the included Alumina Nozzles, which are approximately 2-1/2" (63mm) in length to provide more material wear. Our premium tips are higher density and last longer..
  • Long Lasting High Performance : Durable ceramic sand blaster nozzles that can be used to blast high speed media particles, which quickly remove paint, rust, corrosion and scales..
  • Sandblasting to remove rust and surface treatment. Good use performance, strong wear resistance, long life and high efficiency. Mainly used for the surface deoxidation treatment of machinery, industrial machinery parts, metallurgical castings, etc..
Check Stock

ZEP ZU0856128 Industrial Purple Cleaner and Degreaser Concentrate 128 Ounces

  • For use on: Heavy machinery, engine parts, construction equipment, fiberglass, unfinished concrete, masonry and asphalt.
  • Not for use on: Painted surfaces, aluminum, brass, chrome, copper, marble, slate, granite, natural stone, wood and other alkaline sensitive surfaces as damage may occur.
Check Stock

LIFETORE 10 PCS Mini Brass Wire Brush Set，Wire Bristle Scratch Brush Set for Cleaning Welding Slag and Rust

  • 5 Pieces Stainless Steel Wire Brushes: Wire brush handle length is 13 cm or 5.1 inches, the brush head length is approx.4 cm or 1.6 inches, and the brush head width is 1 cm or 0.4 inch.
  • 5 Pieces Brass Wire Brush: Large size brush handle length is 13 cm or 5.1 inches, the brush head length is approx 4 cm or 1.6 inches, and the brush head width is 1 cm or 0.4 inch.
  • Durable Material: Stainless steel and Brass copper each 5 pieces, strong and durable, can clean rust and detail completely, Hang-up hole for convenient storage.
  • Wide application: Welding wire brushes are suitable for cleaning steel parts, machinery, the unfinished metal parts, paint stains, special corrosion without damaging surfaces or fine features.
  • Intimate design: The brush handle is made of non-slip design, which can better hold, the curve is beautiful and smooth, and the appearance is generous.
Check Stock

MaximalPower 5-Pack Double-Ended Firearm Brass Wire Bristle Brush Set, All Purpose Gun Cleaning Brushes 7" inch for Pistol, Revolver, Rifle & Shotgun

  • Brass Double-ended brushes, Versatile cleaning brushes with large and small end, perfect for cleaning all sorts of hard-to-reach spaces..
  • Brass brushes are essential tools for cleaning all firearms, shotguns and pistols, fits perfectly into tiny spots on just about any weapon and has stainless steel assortment to help clean heavy deposits..
  • DOUBLE ENDED brush for more complete and detailed cleaning. You can use the wide ends for scrubbing large surfaces and the other ends are practical for cleaning detailed parts. You only need one to clean it all!.
  • Suitable for cleaning and descaling in different industries, like steel parts, machinery, unfinished metal parts, paint stains, Welding Slag, and won't damaging the surface or fine features, it can also be used for cleaning the gaps in door frames, sliding doors, floor tiles, etc..
  • USA Based brand with Warranty and Customer Service. Your satisfaction is our highest priority. Please feel free to contact us if you have any questions..
Check Stock

The Silent Service in World War II: The Story of the U.S. Navy Submarine Force in the Words of the Men Who Lived It

  • ... This kit(hull) comes with almost everything that needs to build an RC running model. Kit includes a hull, decks, Injection parts, CNC-sheets, decals, brass photo etch, instructions and other parts for WTC installation. WTC（water tight cylinder）is a sealed cabin that accommodates all machinery and electronic equipment, such as motors, water-Piston, solenoid valve, servo, ESC, ERS, RC, battery etc. WTC supplies submarine the ability of running, diving, and floating..
  • Already Including Double Piston Tank WTC KIT Already including servos,esc,bcu.
Check Stock

Turboom Wire Brush Set Scratch Brush Set for Cleaning Welding Slag Rust and Dust Curved Handle Stainless Steel and Brass Black 10-Pack

  • [Package Included]: 5 Pieces of Stainless Steel Wire Brushes and 5 Pieces of Brass Wire Brush(6 pieces of small brushes and 4 pieces of large brushes).
  • [Two Size]: Large brush handle length is 8.5 inches, the brush head length is 3.9 inches, and the brush head width is 0.95 inches.
  • small brush handle length is 6.7 inches, the brush head length is 1.6 inches, and the brush head width is 0.45 inches.
  • [Durable Material]: strong and durable Stainless steel + Brass copper, can clean rust and detail completely, Hang-up hole for convenient storage.
  • [Wide application]: welding wire brushes are suitable for cleaning steel parts, machinery, the unfinished metal parts, paint stains, special corrosion without damaging surfaces or fine features.
  • [Easy to Hand]: There is a hole on the end of each wire brush handle, special design is convenient for users to hang and store, you don't worry about drop down. The convex groove on the inside of handle, convenient for you to hold and control.
Check Stock

Amazon Basics 10-Inch Scratch Wire Brush, 6 Pack

  • Wire brush set for cleaning tough surfaces.
  • great for removing paint, rust, corrosion, welding slag, and more.
  • Includes (3) 10-inch steel wire brushes and (3) 10-inch brass-coated steel wire brushes.
  • Suitable for cleaning metal and non-metal surfaces, like steel parts, machinery, doors, windows, floor tiles, and more.
  • The brush head part is provided with a protective head cover to increase safety and reduce the risk of injury.
  • Durable plastic handle offers extended reach, a comfortable non-slip grip, and a hole for hanging.
  • Product dimensions: 9.75 x 1.25 x 2.5 inches (LxWxH).
Check Stock

Weiler 44067 0.014\ Wire Size, 7-1/4\ X 2-1/4\ Block Size, 6 X 19 No. Of Rows, Flat Face Fill, Block Type Scratch Brush, Made in the USA

  • 3 Styles of brushes: the package contains 6 pieces brass brushes, 6 pieces stainless steel brushes and 6 pieces nylon brushes, 18 pieces in total, different styles can easily cater most people's needs.
  • Wide usages: these curved handle wire brushes can clean steel parts, machinery, unfinished metal parts, paint stains, special corrosion without damaging the surface or their fine features, also can clean doors, windows, sliding doors and floor tiles, etc..
  • Small spaces cleaning helper: these mini scratch wire brushes are made of stainless steel, copper brass and nylon, durable to use, their plastic hunchbacked handles give helps to clean small and narrow places.
  • Crooked handles: these cleaning wire brushes feature non-slip finger grip handles, providing comfy gripping experience and saving user's efforts.
  • Small holes designed at the end of handles, allowing to be hung from to save space.
  • Proper size: Total length of the scratch wire brush is 6.7 inch, handle length is 5.1 inch, brush head is 1.6 inch, handle width is 0.4 inch , easy to store and carry.
Check Stock

30PCS Mini Wire Brush Brass Brush,Curved Handle Masonry Brush Wire Bristle for Cleaning Welding Slag and Rust (Brass)

  • Package includes: 30 pieces of Brass wire brush.
  • Wire Brush Size: The total length is 17cm/ 6.7inch. the handle length is 13cm/ 5.1inch, the wire bristle head length is 4cm/ 1.6inch, the head width is 1cm/ 0.4inch..
  • Durable Material: strong and durable, can clean rust and detail completely..
  • Comfort Toothbrush Design: It is mini brush, similar to a toothbrush, non-slip finger grip handle design makes the user feel comfortable when using it, there is a small hole at the end can hang up to save space..
  • Designed for use in hard-to-reach areas, suitable for cleaning steel parts, machinery, the unfinished metal parts, paint stains, special corrosion, doors, windows, sliding doors, floor tiles, etc.
Check Stock

4pcs Long Reach Rotary Burr Double Cut Tungsten Carbide Bit Grinding head 1/4\ Shank 6\ Set Rotary Tool set

  • This rotary burrs milling cutters set is designed for rotary tools..
  • Can be used to machine cast iron, cast steel, bearing steel, high carbon steel, chrome-nickel alloy, bronze, brass and other metals or tile, marble, jade bone and other non-metallic..
  • Mechanical parts chamfering, rounding and groove processing..
  • Dual Chamber is crossover lines, not easy to block the lines, more suitable for the object of relatively low density material..
  • Ideal for car, marine, craft carving, machinery, etc..
Check Stock

MXBAOHENG M3-M12 Pneumatic Tapping Machine Air Drill Tapper for Universal Flexible Arm Portable for Using Chuck Size: M3,M4,M5,(M6),M8,M10,M12 (400rpm)

  • 【Tapping Range】M3-M12, Bracket can be installed,bracket need to be prepared by yourself, suitable for pipeline mechanical tapping..
  • 【Application】This pneumatic tapping machine is applicable to all machinery manufacturing industry, machine tools, tooling machinery, plastic machinery, printing machinery, packaging machinery, engineering machinery, automobile and motorcycle parts, aircraft engines and other general purpose machinery industries. Tapping for copper, iron, aluminum, steel, stainless steel, plastic and wood, and other material..
Check Stock