Categories

Best Machinery For Frp Panels

INEXRUD Fiberglass Plastic Hard Tri Folding 4'6\ / 54\ Truck Bed Cover Compatible For 2022 2023 Ford Maverick Tonneau Cover

  • ...e Usage by Pushing Or Pulling The Handle Clamps, And Folding Or Unfolding The Tarp.Noted:The First Panel Near The Cab Can't Folding Or Stand Up..
  • Inventory: Hard FRP Tri Fold Tonneau Cover Assembly,Full Set of Installation And Replacement Kits And Instruction Manual,1pcs Free Motion Sensor Led Light.
  • Cover Features: Panels Made Of excellent Fiberglass Reinforced Plastic surface with PP honeycomb.
  • Rails/Frame:Made Of 6063 T5 Aircraft Grade Alu Alloy.FRP material is Light weight,high-intensity,Anti-impact/vibration and more scratch resistant than aluminum alloy,and has higher compressive strength. excellent performance in water proof/Anti-moisture,strong resistance to chemicals/corrosion,easy to clean the surface..
  • Quality & Service: 3 years Against Defects In Materials And Workmanship Under Its Intended Use.Pls Contact With Our Professional Service Team If You Are Not Sure About The Cover Fit For Your Car Model or Any Installation Problem.
Check Stock

BAK BAKFlip FiberMax Hard Folding Truck Bed Tonneau Cover | 1126601 | Fits 2005 - 2015 Honda Ridgeline 5' Bed (60\)

  • Fits 2005 - 2015 Honda Ridgeline 5' Bed (60").
  • The panels are held in place by an automatic latching system. When you need to open the cover, use the strings located on either side to release the latches and fold the cover up.
  • The FiberMax is built using FRP (fiberglass reinforced polymer) panels. This material is highly resistant to dents and scratches.
  • The FiberMax can be installed with a wrench and socket. Leave the drill in your toolbox.
  • The cover can be opened up to your truck's bulkhead when you need to carry oversize cargo. Struts hold the cover in place so you can drive safely with the cover open.
Check Stock

Reign of Fire

  • ... This kit(hull) comes with almost everything that needs to build an RC running model. Kit includes a hull, decks, Injection parts, CNC-sheets, decals, brass photo etch, instructions and other parts for WTC installation. WTC（water tight cylinder）is a sealed cabin that accommodates all machinery and electronic equipment, such as motors, water-Piston, solenoid valve, servo, ESC, ERS, RC, battery etc. WTC supplies submarine the ability of running, diving, and floating..
  • Already Including Double Piston Tank WTC KIT Already including servos,esc,bcu.
Check Stock

3M 08115 Panel Bonding Adhesive - 200 ml

  • 3M Panel Bonding Adhesive is a two-part epoxy adhesive which provides extended work-time but can be rapidly cured with heat..
  • It is packaged in a 200 ml cartridge and is to be used in conjunction with our 08117 Premium Manual Applicator and the 08193 Static Mixing Nozzles..
  • Panel Bonding Adhesive has excellent adhesion to a wide variety of plastic and metal substrates..
  • When the manufacturer’s directions are followed, this product can be used to bond door skins, roof skins, quarter panels and box sides..
  • In addition, product can be used for bumper cover repair under certain conditions. Typical substrates include cold roll steel, aluminum, SMC, and FRP..
Check Stock

BAK BAKFlip FiberMax Hard Folding Truck Bed Tonneau Cover | 1126203 | Fits 2002-2018 2019-21 Classic Dodge Ram 1500 2003-21 2500/3500 6 6 Bed 78

  • Fits 2002-2018, 2019-21 Classic Dodge Ram 1500, 2003-21 2500/3500 6' 6" Bed (78").
  • The panels are held in place by an automatic latching system. When you need to open the cover, use the strings located on either side to release the....
  • The FiberMax is built using FRP (fiberglass reinforced polymer) panels. This material is highly resistant to dents and scratches.
  • The FiberMax can be installed with a wrench and socket. Leave the drill in your toolbox..
  • The cover can be opened up to your truck's bulkhead when you need to carry oversize cargo. Struts hold the cover in place so you can drive safely with....
Check Stock

BAK BAKFlip FiberMax Hard Folding Truck Bed Tonneau Cover | 1126126 | Fits 2015 - 2023 Chevy/GMC Colorado/Canyon 5' 3\ Bed (62.7\) , Black

  • Fits 2015 - 2022 Chevy/GMC Colorado/Canyon 5' 3" Bed (62.7").
  • The panels are held in place by an automatic latching system. When you need to open the cover, use the strings located on either side to release the latches and fold the cover up.
  • The FiberMax is built using FRP (fiberglass reinforced polymer) panels. This material is highly resistant to dents and scratches.
  • The FiberMax can be installed with a wrench and socket. Leave the drill in your toolbox.
  • The cover can be opened up to your truck's bulkhead when you need to carry oversize cargo. Struts hold the cover in place so you can drive safely with the cover open.
Check Stock

OA-BRES 7-1/4-Inch 60-Tooth Circular Saw Blade with 5/8-Inch Arbor, TCT ATB Finish Blade for Wood Cutting (2-Pack)

  • DIMENSIONS: 2 PACK 7-1/4 Inch 60T Finish Saw Blade, 5/8 inch Arbor, with a nice storage case..
  • DURABLE: OA-BRES circular saw blades are made of durable premium alloy steel material, with hardened and sharper construction-grade tungsten carbide teeth for effective woodworking. Fully Polished and Chrome Plated Surface provides a long-lasting usage life..
  • EFFECTIVE: Incorporates an ATB (Alternating Top Bevel) offset tooth design, sharp saw blade cutters with thin kerf ensure smooth, fast and accurate cutting with impressive results..
  • APPLICATING: General purpose Hard & Soft wood cutting saw blade. for long-lasting cuts in plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP..
  • COMPATIBILITY: Can used in corded and cordless circular saws, miter saw and table saw..
Check Stock

Amoolo 6-1/2\ 24T Circular Saw Blade for Cutting Wood, Plastic and Wood Composite with 5/8\ Arbor (6.5\-2pcs)

  • 【DIMENSIONS】- Includes 2pcs of 6-1/2" & 5/8" arbor 24T TCT circular saw blade..
  • 【WIDE APPLICATIONS】- Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP. Providing a high degree of finish edge. The blades also can rip cut along the grain..
  • 【FULLY HARDENED STEEL BLADE BODY】- Delivers accuracy and resists bending and deflection for true cuts..
  • 【ATB TEETH DESIGN】-Incorporates an ATB (Alternating Top Bevel) offset tooth design, The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood..
  • 【TUNGSTEN CARBIDE TEETH】- Provides excellent wear and heat resistance. The positive cutting angle which provides fast and efficient removal of chips and swarf..
Check Stock

Luckyway 2-Pack 6-1/2 Inch 18T&24T with 5/8 Inch Arbor TCT Circular Saw Blade for Cutting Wood

  • DIMENSIONS - Includes 1pc 6-1/2*5/8*18T & 1pc 6-1/2*5/8*24T TCT saw blade..
  • APPLICATION - Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP. Providing a high degree of finish edge. The blades also can rip cut along the grain..
  • MATERIAL - Fully hardened steel blade body – delivers accuracy and resists bending and deflection for true cuts..
  • FEATURES - Incorporates an ATB (Alternating Top Bevel) offset tooth design, The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood..
  • Tungsten carbide teeth provide excellent wear and heat resistance. The positive cutting angle which provides fast and efficient removal of chips and swarf..
Check Stock

Amoolo 4-1/2\ 24T Arbor Circular Saw Blade for Cutting Wood, Plastic and Wood Composite with 5/8\ Arbor (4.5\-3pcs)

  • 【DIMENSIONS】- Includes 3pcs of 4-1/2" & 5/8" arbor 24T TCT circular saw blade..
  • 【WIDE APPLICATIONS】- Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP. Providing a high degree of finish edge. The blades also can rip cut along the grain..
  • 【FULLY HARDENED STEEL BLADE BODY】- Delivers accuracy and resists bending and deflection for true cuts..
  • 【ATB TEETH DESIGN】-Incorporates an ATB (Alternating Top Bevel) offset tooth design, The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood..
  • 【TUNGSTEN CARBIDE TEETH】- Provides excellent wear and heat resistance. The positive cutting angle which provides fast and efficient removal of chips and swarf..
Check Stock

Luckyway 2-Pack 12 Inch Miter Saw Blades 32T&80T with 1 Inch Arbor TCT Circular Saw Blade for Cutting Wood

  • DIMENSIONS - Includes 1pc 12*1*32T & 1pc 12*1*80T TCT circular saw blade..
  • APPLICATION - Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP. Providing a high degree of finish edge. The blades also can rip cut along the grain..
  • MATERIAL - Fully hardened steel blade body – delivers accuracy and resists bending and deflection for true cuts..
  • FEATURES - Incorporates an ATB (Alternating Top Bevel) offset tooth design, The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood..
  • Tungsten carbide teeth provide excellent wear and heat resistance. The positive cutting angle which provides fast and efficient removal of chips and swarf..
Check Stock

Luckyway 2-Pack 7-1/4 Inch 24T&60T with 5/8 Inch Arbor TCT Circular Saw Blade for Cutting Wood

  • DIMENSIONS - Includes 1pc 7-1/4*5/8*24T & 1pc 7-1/4*5/8*60T TCT saw blade..
  • APPLICATION - Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP. Providing a high degree of finish edge. The blades also can rip cut along the grain..
  • MATERIAL - Fully hardened steel blade body – delivers accuracy and resists bending and deflection for true cuts..
  • FEATURES - Incorporates an ATB (Alternating Top Bevel) offset tooth design, The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood..
  • Tungsten carbide teeth(TCT) provide excellent wear and heat resistance. The positive cutting angle which provides fast and efficient removal of chips and swarf. Tougher tungsten carbide teeth stays sharper longer life..
Check Stock

MaxMate Soft Tri-fold Truck Bed Tonneau Cover Compatible with 2020-2022 Jeep Gladiator JT | 5' (60\) Bed | TCJ371060

  • 【Fitment】2020-2022 Gladiator JT, Fleetside 5ft(60.3in) Bed. (NOTE: Fit For Models with or Without The Deck Rail System.
  • 【Material】Consists of PP Honeycomb and FRP panels. Panels are coated with a scratch-resistant, UV-protective black powder coat finish. High-quality materials can withstand up to 500 lbs of impact, preventing theft from thieves..
  • 【Multiple Protection】Whether you need to protect tools, toys, luggage, fishing equipment, or anything else from the elements on the road, please give FeeTUO as a wonderful gift to your family, or to yourself..
  • 【Patent Design】FeeTUO Tri-Fold Truck Bed Cover has a unique quick-release clamping system, it can be folded easily into thirds at the hinges when you need to load some higher goods, such as ladders or building materials..
  • 【Easy to Install】No drilling, Easy to Install /Take off the truck bed cover, it needs about 10-15 minutes just. (Provide 3 years warranty).
Check Stock