Categories

Best Machining Center Accessories

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

  • 【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
  • Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
  • For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
  • 【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
  • 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
  • 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
Check Stock

Beall Collet Chuck, Easy To Replace Lathe Collet Chuck Wear-resistant and Durable for CNC Machining Center

  • Scope of application: This milling chuck holder is used for CNC machining center.
  • This package includes 1pcs milling chuck holder, 1 pcs ER32 wrench and 8pcs ER32 Collet.
  • As milling machine accessories, convenient to replace the broken one.
Check Stock

Beall Collet Chuck, Stable Performance Lathe Collet Chuck with ER32 Wrench Collet Chuck Holder for CNC Machining Center

  • As milling machine accessories, convenient to replace the broken one.
  • Scope of application: This milling chuck holder is used for CNC machining center.
  • This package includes 1pcs milling chuck holder, 1 pcs ER32 wrench and 8pcs ER32 Collet.
Check Stock

Beall Collet Chuck, Wear-resistant and Durable Lathe Collet Chuck 10pcs NT40-ER32-70L for CNC Machining Center

  • As milling machine accessories, convenient to replace the broken one.
  • Scope of application: This milling chuck holder is used for CNC machining center.
  • This package includes 1pcs milling chuck holder, 1 pcs ER32 wrench and 8pcs ER32 Collet.
Check Stock

Beall Collet Chuck, Mill Machine Collet Wear-resistant and Durable with ER32 Wrench Collet Chuck Holder for CNC Machining Center

  • This package includes 1pcs milling chuck holder, 1 pcs ER32 wrench and 8pcs ER32 Collet.
  • As milling machine accessories, convenient to replace the broken one.
  • Scope of application: This milling chuck holder is used for CNC machining center.
Check Stock

Neewer NW-A21 Tripod Extender, 13” Aluminum Alloy Tripod Extension Tube, 2-Section Center Column Handheld Telescopic Stick Rod with 1/4” to 3/8” Screw for Tripod/Gimbal/DSLR Camera, Max Load 33.1lb

  • 003cp003e【Stable Center Column】 With aluminum alloy construction, this center column is stable and corrosion-resistant, suitable for supporting DSLR cameras, video lights, and other devices up to 33.1lb (15kg). The CNC machining makes it smooth to the touch.
  • 003cp003e【Adjustable Height】 The height of this 2-section center column is adjustable from 8.3” to 13” (21cm to 33cm). Two tubes are 0.9” and 1” (22mm and 25mm) in diameter with a 1.8” (45mm) top mounting plate.
  • 003cp003e【Wide Compatibility】 Compatible with tripods, monopods, selfie sticks, and stabilizers to increase their height. The two-in-one 1/4”-20 & 3/8”-16 mounting screw can mount different devices and accessories.
  • 003cp003e【Easy to Carry】 The center column is lightweight (5.6oz/160g) and small in size (8.3”/21cm) when retracted, making it easy to carry and store.
  • 003cp003e【Secure Twist Lock】 Easily and quickly loosen the twist lock and extend the center column to an ideal height. Then, tighten the twist lock and keep the extended section securely in place.
Check Stock

Neewer NW-C21 Tripod Extender, 13” Carbon Fiber Tripod Extension Tube, 2-Section Center Column Handheld Telescopic Stick Rod with 1/4” to 3/8” Screw for Tripod/Gimbal/DSLR Camera, Max Load 44.1lb

  • 003cp003e【Stable Center Column】 With carbon fiber construction, this center column is stable and corrosion-resistant, suitable for supporting DSLR cameras, video lights, and other devices up to 44.1lb (20kg). The CNC machining makes it smooth to the touch.
  • 003cp003e【Adjustable Height】 The height of this 2-section center column is adjustable from 8.3” to 13” (21cm to 33cm). Two tubes are 1” and 1.1” (25mm and 28mm) in diameter with a 1.8” (45mm) top mounting plate.
  • 003cp003e【Wide Compatibility】 Compatible with tripods, monopods, selfie sticks, and stabilizers to increase their height. The two-in-one 1/4”-20 & 3/8”-16 mounting screw can mount different devices and accessories.
  • 003cp003e【Easy to Carry】 The center column is lightweight (5.3oz/150g) and small in size (8.3”/21cm) when retracted, making it easy to carry and store.
  • 003cp003e【Secure Twist Lock】 Easily and quickly loosen the twist lock and extend the center column to an ideal height. Then, tighten the twist lock and keep the extended section securely in place.
Check Stock

BONYTOOL Dovetail Milling Cutter HRC55 Coated Tungsten Steel Carbide Slotting End Mills 75° 60° 45° Chamfering CNC 4 mm -60°

  • Material: Tungsten steel, high hardness and good toughness.
  • Rugged construction, durable with long service life.
  • Milling cutter end mills machining hardness: HRC up to 55 degree.
  • Applicable machine tools: CNC machining center, CNC machine tool, engraving machine, fine engraving machine, high speed machine, etc.
  • Applicable materials: stainless steel, die steel, ductile cast iron alloy steel, mixing steel, titanium alloy, etc..
Check Stock

sjlerst RC Spring RC Accessory, Upgrade Shock Absorber, Car Shock Absorber, Front&Rear for Axial for SCX10

  • ✿【Nice Replacement Accessories】☀Nice replacement accessories for the old or broken one..
  • ✿【Fine In Workmanship】☀Fine in workmanship and high in quality..
  • ✿【Double Spring Design】☀Double spring design for best performance..
  • ✿【CNC Machining Aluminum】☀CNC machining aluminum with anodizing, which makes it solid, durable and of exquisite appearance..
  • ✿【Widely Used】☀Suitable for Axial / SCX10 / D90 / TRX-4 RC crawler car..
Check Stock

Acratech GXP Ball Head w/ Knob Clamp

  • 【Low Profile More Stable】The ball head is designed with a low center of gravity, CNC machining, 44MM large ball diameter, making it extremely....
  • 【Excellent Quality】The low profile ball head adopts all-metal structure, 0.1MM machining tolerance, anodic anodized, ultra-high-strength aviation....
  • 【Excellent Design】Double grooves and lightweight design. The maximum load-bearing capacity of this low profile ball head camera mount is 44....
  • 【Precision Adjustment】4 * 90 degrees, 5 degrees per scale, and double spirit bubbles to meet the needs of accurate photography and Panoramic....
  • 【Widely Applicable】3/8"screw holes at the bottom of the ball head and easy to install tripod, monopod, camera slider and mini tripod. With 1/4"....
Check Stock

THK Cross Roller Guide V6-600 VR6-600×41Z 6600T

  • There are 10pcs of this center drill bit, which is convenient and practical for user, easy to use..
  • This centering drill bit is made of high‑speed steel with high hardness and hardness..
  • The center drill is suitable for bench drills, milling machines, and machining centers..
  • The 3mm center drill is incisive, wear‑resistant, heat‑resistant, and has a long service life..
  • Adopt enlarged chip flute design is conducive to high‑speed operation and accelerate chip removal..
Check Stock

Carbon Fiber Heavy Duty Tripod ARTCISE 81'' Professional Tripod for Camera, 10-Layer Carbon Fibre Tube, 32.5mm Leg with Low Profile Tripod Ball Head for Canon Nikon Sony, DSLR SLR Digital Camcorder

  • ..., panoramic design is easier to take panoramic pictures, 40mm ball diameter, low center of gravity design, solid and stable..
  • 【Humanized Design】The tripod legs are covered with high quality natural rubber grip, allowing users to protect the user’s hands when grabbing in cold environments. 1/4 female Thread for accessories，phone mount and LED iaht can be mounted on the tripod. Gravity Hook can hang backpack, tripod bag and other items. 8 years warranty. If you have any questions you can contact us at any time..
Check Stock

High Hardness Household Carbon Steel Sliding Barn Door Floor Roller Guide with Bearing Hardware Fittings

  • Adopt enlarged chip flute design is conducive to high‑speed operation and accelerate chip removal..
  • The center drill is suitable for bench drills, milling machines, and machining centers..
  • The 3mm center drill is incisive, wear‑resistant, heat‑resistant, and has a long service life..
  • There are 10pcs of this center drill bit, which is convenient and practical for user, easy to use..
  • This centering drill bit is made of high‑speed steel with high hardness and hardness..
Check Stock