Categories

Best Machining Finished

Milling Face, High Temperature Resistance High Speed Good Impact Resistance Facing Cutter, New Coating Technology for Precision Machining Rough Machining

  • Machining Range: precision machining, rough machining, plane processing and step processing..
  • High speed: rotary and milling feed speeds are 3 times faster than normal milling cutters..
  • Made of cemented carbide, which has high hardness with good impact resistance..
  • New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time..
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

  • 【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
  • Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
  • For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
  • 【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
  • 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
  • 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
Check Stock

2M Soft Copper Tube, OD 4mm x ID 3mm Copper Round Tubing Used in Manufacture of Wire, Cable, Brush, Compass, Aviation Instrument

  • ✔ 【Good Thermal Conductivity】 - The copper pipe used in manufacture of magnetism instruments or meters that need anti magnetic interference, such as compass, aviation instrument, etc..
  • ✔ 【Wonderful Plasticity】 - Easy to machining under hot and cold pressure, can be made into tube, rod, wire, strip, belt, plate, foil, etc..
  • ✔ 【Premium Performance】 - Fine ductility and corrosion resistance and weldability. Can be made into all kinds of semi-finished products and finished products by cold, warm forging..
  • ✔ 【Excellent Electrical oCnductivity】 - The copper hose commonly used in manufacture of wire, cable, brush(electric), etc..
  • ✔ 【After-sales Service】 - If you have any questions about our products, please contact us by email with no hesitate and we will do our best to solve your problem..
Check Stock

Streamline Billetanium Steering Stabilizer (Silver) for 99-08 Honda TRX400EX

  • Made of Heat Treated (Billet) Aluminum [6061-T6] / Improves stability in tight cornering / Easy Installation (fork shields/guards must be removed for install).
  • Manufactured using 100% CNC Machining / Reduces fork flexion / 5-piece design eliminates fork binding when installed.
  • No Casting or Molding are involved in the Manufacturing Process / This listing comes with: (1) Fork Stabilizer Brace with Stainless Steel Bolts.
  • Finished with Anodize Coating / Improves tire life and reduces cupping (uneven thread wear due to bouncing).
  • Reduces low and high speed wobbles / Decreases sensitivity to rough roads surfaces and rain grooves.
Check Stock

1-1/8\ 6061 Aluminum Round Rod 12\ Long Solid T6511 New Lathe Bar Stock

  • 6061 aluminum has excellent corrosion resistance and excellent joining characteristics, easy to machine or weld..
  • 6061 aluminum is an excellent multi-purpose engineering material that will not rust and has a long service life..
  • 6061 aluminum round rod is well finished, the surface is smooth and clean without burrs, no dinks or scratchess..
  • Aluminum rods are widely used in milling or lathe machining, construction and industrial materials, such as the manufacture of marine and automotive parts, railway and so on..
  • The 12" long solid round rod bar is long enough to be cut and applied to different projects..
Check Stock

1-1/2\ 6061 Aluminum Round Rod 12\ Long Solid T6511 New Lathe Bar Stock

  • ✿ 6061 aluminum has excellent corrosion resistance and excellent joining characteristics, easy to machine or weld..
  • ✿ 6061 aluminum is an excellent multi-purpose engineering material that will not rust and has a long service life..
  • ✿ 6061 aluminum round rod is well finished, the surface is smooth and clean without burrs, no dinks or scratchess..
  • ✿ Aluminum rods are widely used in milling or lathe machining, construction and industrial materials, such as the manufacture of marine and automotive parts, railway and so on..
  • ✿ The 12" long solid round rod bar is long enough to be cut and applied to different projects..
Check Stock

WestHunter Optics 30 mm Cantilever Picatinny Scope Mount | Black

  • Position the center of the scope tube at a height of 40 mm/1.57 in from the base.
  • The high profile mount fits 21mm Picatinny rails and for both 30mm and 25.4 mm (1 inch) tube optics with up to a 75mm outer objective diameter.
  • Net weight 150 g / 5.29 oz, 2.48 in/63 mm offset distance.
  • The finishing touch to optics and the rail combination. Combining rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency..
  • Precision CNC Machined from 6063 T5 aircraft-grade aluminum alloy and finished in the anodizing(Disadvantages: The anodizing process uses the general level, please be cautious if you have a high-quality requirement for the appearance).
Check Stock

10 Pieces 1/2\ Aluminum 6061 Round Rod 14\ Long +/-.07\ Solid T6 Lathe Extruded Bar Stock .50\ OD

  • 6061 aluminum has excellent corrosion resistance and excellent joining characteristics, easy to machine or weld..
  • 6061 aluminum is an excellent multi-purpose engineering material that will not rust and has a long service life..
  • 6061 aluminum round rod is well finished, the surface is smooth and clean without burrs, no dinks or scratchess..
  • Aluminum rods are widely used in milling or lathe machining, construction and industrial materials, such as the manufacture of marine and automotive parts, railway and so on..
  • The 12" long solid round rod bar is long enough to be cut and applied to different projects..
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

Mobil 100545 Vactra No.4 Way Oil 1 gal

  • Excellent Metal Wetting & Adhesiveness - Prevents separation of lubricant from machining surfaces.
  • Improved Frictional Properties - Eliminates stick slip and enables accurate machining.
  • Improves Chatter and Scoring - Enables consistant machining operations.
  • Compatible with Multiple Materials - Suitable for wide range of materials.
  • Superior Rust and Corrosion Protection - Enables reduction of sliding surface deterioration.
Check Stock

3PCS BAP300R C10-10-120-1T/C12-12-130-1T/C12-13-130-1T 1Flute Indexable End Milling Holder+ 6PCS APMT1135PDER CNC Inserts+3PCS T8 Wrench (3PCS 300R End Milling Holder)

  • * Package includes ：1PCS 300R C10-10-120-1T +1PCS 300R C12-12-130-1T+1PCS 300R C12-13-130-1T+ 6PCS APMT1135PDER + 3PCS T8 wrench. If you need more APMT1135PDER, please search ASIN：B097RG372M..
  • * High performance replaceable inserts, anti-seismic high-quality alloy steel, can effectively suppress vibration..
  • * It is suitable for rough machining, finish machining, digging machining, groove machining and cutting machining..
  • * The screw offset fastening design makes the inserts and groove closely combined, enhances the rigidity, and the processing effect will be better..
  • * The handle strictly abides by the process of first vacuum quenching and then tapping to avoid the deformation caused by first tapping and then quenching. It is firm and durable and can prolong the service life..
Check Stock

JEGS Pushrod Guide Plates | Fits Big Block Chevy | Made In USA | For 3/8 “ Diameter Push Rods | Steel | Black Oxide Finish | Raised | Heat Treated | 8 Plates Per Package For One Engine

  • DESIGNED AND MANUFACTURED FOR precise fit and function.
  • MADE IN USA with high quality components and assembly.
  • NOTE: cylinder head machining and screw-in rocker arm studs may be required for installation.
Check Stock

HTD 3M 150-5100 Close Loop Timing Synchronous Belt 10/15/20mm Width 3mm Pitch

  • Specifications: 4M11T, outer diameter: 52mm, inner hole: rough machining.
  • Specifications: 4M13T, outer diameter: 60mm, hole: rough machining.
  • Specifications: 4M15T, outer diameter: 68mm, hole: rough machining.
  • Fast Shipping Guarantee: All parcel will be delivered in 7-15 days.
Check Stock