Categories

Best Machining Heatsink With Solid

SpeTool 12501 2 Flutes Carbide CNC End Mill For Aluminum (1/4 Shank, 2.5 inch Long) Router Bit Spiral Mill

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The EndMill With Flat Top, 2-Flutes, Large Chip Pocket, Easy Chip Removal..
  • For Aluminum, Non-ferrous Metal, Plastics, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Slot Machining, Side Face Machining, Hole Machining. Please Adjust the Speed, Feed and Cutting Depth According to Actual Cutting Conditions..
Check Stock

PS5 NVMe Heatsink,M.2 2280 Cooler for The Playstation 5 Internal (Black)

  • Specially designed for PlayStation 5 Upgrade M.2 NVME Disk heatsink.
  • Aluminum alloy: high performance a solid aluminum heatsink..
  • 【High-Quality CNC】- Aluminum alloy, silver plating , anodic oxidation surface treatment.
  • Greatly increase the heat dissipation area of M.2 storage disk, with 10°C - 30°C cooling effect..
  • Comes with thermal pad and installation guide..
  • Classic and practical cooling line Offers a steady and effective cooling solution for the PS5..
Check Stock

Sunday 21 NightShift BMX Frame - 20.75 TT Matte Sky Blue

  • Double-butted top and down tubes with proven internal gusseting.
  • Post Weld Machining: The Mid BB and Headtube is machined to its absolute minimum without sacrificing strength or durability–machining happens after welding for a precision bearing fit.
  • Hollow Dropouts with Chain Tensioners: Hollow 8mm wide dropouts are as light as a solid 5mm dropout, but over twice as strong. There is a small internal chain tensioner to hold the wheel in.
  • Removable Brake Hardware: removable brake mounts and cable channel improvements that provides benefits with or without a brake setup.
Check Stock

sjlerst RC Spring RC Accessory, Upgrade Shock Absorber, Car Shock Absorber, Front&Rear for Axial for SCX10

  • ✿【Nice Replacement Accessories】☀Nice replacement accessories for the old or broken one..
  • ✿【Fine In Workmanship】☀Fine in workmanship and high in quality..
  • ✿【Double Spring Design】☀Double spring design for best performance..
  • ✿【CNC Machining Aluminum】☀CNC machining aluminum with anodizing, which makes it solid, durable and of exquisite appearance..
  • ✿【Widely Used】☀Suitable for Axial / SCX10 / D90 / TRX-4 RC crawler car..
Check Stock

Bontok 1 inch Scope Rings 2Pcs 1 inch Diameter Scope Mount Rings for Picatinny Rail 1.00 inch Height

  • 【Perfect Scope Ring Set for All 21mm Picatinny/ Weaver Rails】: Set of 2 Scope include 2 pcs low profile(0.8 inch/20.32mm). 1 inch diameter rings....
  • 【Built-In Extre Tape Protection】: Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion....
  • 【Easy to Install and Remove】:Just twist on/off the rail clamp screw nut via allen wrench and mount the base on rail. Comes with 2 pcs allen....
  • 【Solid But Lightweight Material】:Precision machining of premium 6061 aircraft aluminum alloy, both with black hard coat anodize. Sturdy but....
  • 【Precise Specification】:High quality machining to ensure ultimate accuracy for your mounting..
Check Stock

SpeTool 1/4 Shank Carbide End Mill for Aluminum Cut (3 Flutes, 3.5 inch Long) Non-Ferrous Metal Upcut CNC Spiral Router Bit

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/2 inch Cutting Length, 3-1/2 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool Extra Long End Mill for Aluminum 5/16in CNC Router Bits Metal Cutter 3-Flute Tools, 1-5/8in Flute Length, 4in Overall Length

  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-5/8 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Endmill Suit for CNC Router and Brand Plunge Router with 5/16" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 3 Flute Carbide End Mill for Aluminum Non-Ferrous Cutting Tool Upcut Bit for CNC Machine, 1/2 Inch Shank, Extra Long 4 Inch

  • Solid Carbide Spiral Router Bit with 1/2 inch Shank and 1/2 inch Cutting Diameter, 2 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/2" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Pastall 100 PCS (8 Different Sizes) Heatsink Kit with Conductive Adhesive Tape, Aluminum Heat Sink Cooler and Copper Heatsink for Raspberry Pi A B B+ 2/3/4

  • ❤ The 100 PCS (8 Different Sizes) heatsink kit with conductive adhesive tape, Easy to use and could effectively provide good heat dissipation..
  • ❤ As a Raspberry Pi heat sink (using as raspberry pi 4 heatsink/raspberry pi 3B+ heatsink), it has good heat dissipation performance and compatible with most Raspberry Pi cases..
  • ❤ The heat sink is equipped with high-performance thermal conductive adhesive, high viscosity, durable and long lasting..
  • ❤ This small heatsink kit included : 80 pcs aluminum heatsink + 20 pcs copper heatsink( It Contains 8 different sizes of heat sink,Please check the specific size on the picture)..
  • ❤ the heatsinks also could be used for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator.It is an excellent heat sink for heat dissipation in electronic DIY,You will love it!.
Check Stock

Milling Face, High Temperature Resistance High Speed Good Impact Resistance Facing Cutter, New Coating Technology for Precision Machining Rough Machining

  • Machining Range: precision machining, rough machining, plane processing and step processing..
  • High speed: rotary and milling feed speeds are 3 times faster than normal milling cutters..
  • Made of cemented carbide, which has high hardness with good impact resistance..
  • New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time..
Check Stock

Easycargo 124pcs Heatsink Kit 9 Sizes Multicolor Aluminum Copper + 3M 8810 Thermal Conductive Adhesive Tape, Cooler Heat Sink Cooling VRM VRAM CPU GPU Small IC Laptop Raspberry Pi 4 SSD NVMe M.2 PS5

  • Universal Heatsink Assortment Box,124pcs Multicolor in 9 different size + Pre-applied 3M 8810 Thermal Conductive Adhesive Tape..
  • Variety Aluminum and Copper heat sinks for cooling raspberry pi 4, VRM VRAM RAM CPU GPU MOSFET Small IC Chips PC Components Laptop M2 M.2 SSD NVMe PS5.
  • Includes: 8pcs black anodized aluminum heatsink: 0.56 x 0.56 x 0.26 inch (14mm x 14mm x 7mm).
  • 8pcs green anodized aluminum heatsink: 0.56 x 0.56 x 0.30 inch (14mm x 14mm x 8mm).
  • 8pcs silvertone aluminum heatsink: 0.6 x 0.6 x 0.25 inch (15mm x 15mm x 6.5mm).
  • 8pcs silvertone aluminum heatsink: 0.56 x 0.56 x 0.21 inch (14mm x 14mm x 5.5mm) (L*W*H)..
  • Includes: 16pcs black anodized aluminum heatsink: 0.56 x 0.4 x 0.26 inch (14mm x 10mm x 7mm) (L*W*H).
  • 16pcs silvertone aluminum heatsink: 0.56 x 0.4 x 0.21 inch (14mm x 10mm x 5.5mm) (L*W*H)..
  • Includes: 20pcs black anodized aluminum small heatsink: 0.35 x 0.35 x 0.19 inch (9mm x 9mm x 5mm).
  • 20pcs silvertone aluminum small heatsink: 0.35 x 0.35 x 0.19 inch (9mm x 9mm x 5mm).
  • 20pcs low profile copper pad shim heat sink: 0.59 x 0.59 x 0.02 inch (15mm x 15mm x 0.5mm) (L*W*H)..
Check Stock

EKWB EK-M.2 NVMe Heatsink- Black

  • Materials used: – Aluminium front cover – Aluminium backplate – Stainless steel clips.
  • Enclosed: – EK-M.2 NVMe Heatsink front cover – black – EK-M.2 NVMe Heatsink backplate – black – Mounting clips – Thermal pad 0.5mm – Thermal pad 1mm – Thermal pads.
  • PLEASE NOTE: The heatsink is compatible with all single sided type 2280 M.2 NVMe SSDs (22mm wide, 80mm long). The heatsink is compatible with M.2 (NGFF) connectors 4.2mm heigh.
  • PLEASE NOTE: Its mandatory to mount thermal pads on both sides of the M.2 NVMe SSD. The ASUS HYPER M.2 PCIe card just for showcase it is not included!.
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

  • 【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
  • Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
  • For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
  • 【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
  • 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
  • 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
Check Stock