Best Machining Part Part Precison
MAACFLOW - Stainless Steel Barb/Barbed Hose Fitting 5/8 Hose ID Barb x 1/4 Male NPT Adaptor/Coupler/Connector Pack of 2
- Passivation process to increase the level of protection against rust and corrosion on the material, thus greatly improve product's durability and lifespan.
- High-speed machining process improves the machining accuracy and the machined part’s surface, to achieve good surface finishing.
- Design for thicker wall, longer on thread and barb, to increase fitting's durability and relliability.
- 100% NPT gage inspection to ensure thread conformity.
- Clamshell packing to protect fitting and thread being damage during transit.
Check StockTE-CO 30502 Serrated End Clamp, For 1/4\
- For workholding during machining applications.
- Made from case hardened 1018 steel with a black-oxide finish.
- Serrated teeth match all TE-CO Step Blocks.
- Bridgeport type milling machines use Part No. 20402.
Check StockHHIP 2208-0625 5/8 X 5\ Right Hand S10K-MGIVR/L2 Internal Grooving Tool Holder
- Tool holder design provides precision clamping and insert indexing accuracy.
- Ideal for external grooving, turning, part-off, relieving and profile machining.
Check StockPanther Marine 55-2600 Auxiliary Motor Steering Kit - Stainless Steel
- Brand New RockJock Jeep TJ/LJ/XJ/MJ/ZJ Currectlync Steering System (Part #CE-9701).
- Compatible with: 1997-2006 TJ/LJ Jeep Wranglers, 1984-2001 XJ Cherokee, 1993-1998 ZJ Grand Cherokee, 1985-1992 MJ Comanche.
- The RockJock Currectlync heavy duty tie rod and drag link system for TJ, LJ, XJ, MJ and ZJ vehicles features, a 1 1/4″ diameter forged alloy drag link, and 1 1/4″ solid alloy steel tie rod bar that is bored and threaded on the ends. All 7/8″ thread tie rod ends with boots are included as well as the RockJock heavy duty steering stabilizer bracket..
- This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary. This unit is rated at 200% stronger than the stock components..
- NOTE: This unit is designed to be used on vehicles with 4″ of lift. It can be used on vehicles with less lift, but the vehicle must have a minimum of a 2″ bump stop (over stock). Also, on vehicles with no lift, 2 of the tie rod ends may need be trimmed to achieve proper adjustment..
Check Stock38 Piece 5/16 Premium C6 Carbide Tipped Lathe Tool BIT Set BRAZED Single Point
- 5/16" Premium C-6 carbide tips designed for long tool life in steel, alloys, etc..
- 8 Pcs Style AR & AL- For general machining applications, turning, facing, boring and chamfering.
- 6 Pcs Style E- 30-degree Lead angle for threading, chamfering, V-grooving, turning, facing & boring.
Check StockVGEBY RC Driveshaft Axle, Driveshaft Axles CVD Upgrade Accessory Fit for Traxxas E?Revo Summit RC Car Model
- High Processing Accuracy-- The RC automobile drive shaft bridge adopts powerful CNC machining, has a 45 hardened carbon steel structure, and has high machining accuracy, stability and reliability..
- Ensure Long Service Life and Best Performance-- The RC car transmission axle can be used to replace the plastic front or rear axle of the original drive to ensure a long service life and optimal performance..
- Strong Polishing Performance-- The RC automobile drive shaft bridge is beautiful in appearance, convenient and practical, strong in light transmission, and good in polishing performance. It is an excellent model car upgrade part..
- Simple Installation and Removal-- The RC car drive shaft bridge is easy to install and disassemble, has a wide range of uses, and can update and modify your remote control car and improve its performance..
- Quality Hardened Steel Material-- The RC car transmission axle is made of high-quality hardened steel, which has higher wear resistance and strength, and is more durability..
Check StockLathe Center, MT2 Precision Rotary Live Tailstock Center Morse Taper 2 Milling Center for Lathe in Medium Speed and Medium Load Environment
- Quenching Hardness 60 ~ 62 HRC: Conical part is made from T10 steel, quenching hardness 60 to 62 HRC, the main body part is made from high-quality steel, durable to use..
- Ultra Precision: High quality bearing design, using high speed bearing for high accuracy. Accuracy is less or equal to .0005..
- Application: The primary use of a center is to ensure concentric work is produced.
- this allows the workpiece to be transferred between machining operations without any loss of accuracy.Designed for lathe in medium speed and medium load environment. Maximum RPM is 5,000.
- High Steel Quality: Well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe. ust proof seal preventing cutting dust enter into bearing thus prolong service time..
- Shipping: This item will ship from USA ,delivery time need about 4-7 days.If there is any questions please feel free to contact with us, our experienced customer service team will response in 24 hours..
Check StockKICK SHAFT ASSEMBLY STARTER GEAR for YAMAHA PW50 PW 50
- Fit for universal 50cc-150cc pit dirt bike ATV four-wheeled motorcycle.
- Size:Diameter of installation hole:13mm,Length:145mm.
- Lightweight and portable for carrying and use. CNC machining ensures sleek surface and standard mounting hole, you can mount it easily.Good replacement for replacing the old broken motorbike start lever.
- If you are unsure about the right model you need, freely contact us with your engine part so that we can help you to choose.
- With always fast and free shipping on every order,focusing on quality and service.
Check StockTE-CO 20413 Machinist Clamp Kit, 1/2\ Table T-Slot x 3/8-16\ Stud, 52 Pieces
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
- For workholding during machining applications.
- 1/2" machine tool table T-slot to fit 1/2" T-slot nuts.
- Bridgeport type milling machines use Part No. 20402.
- Made from case hardened 1018 steel with a black-oxide finish.
Check StockTE-CO 20402 Machinist Clamp Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
- For workholding during machining applications.
- 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
- Bridgeport type milling machines use Part No. 20402.
- Made from case hardened 1018 steel with a black-oxide finish.
Check StockTE-CO 20401 Machinist Clamp Kit, 9/16\ Table T-Slot x 1/2-13\ Stud, 52 Pieces
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
- For workholding during machining applications.
- 9/16" machine tool table T-slot to fit 9/16" T-slot nuts.
- Bridgeport type milling machines use Part No. 20402.
- Made from case hardened 1018 steel with a black-oxide finish.
Check StockTE-CO 20402PL Machinist Promo Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
- For workholding during machining applications.
- 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
- Bridgeport type milling machines use Part No. 20402.
- Made from case hardened 1018 steel with a black-oxide finish.
Check Stock