Categories

Best Machinist Reaming Tool

Berard Olive-Wood Handcrafted Lemon Reamer

  • This tool makes the task of reaming lemons and limes effortless.
  • Use the tip to remove seeds before reaming.
  • Perfect tool to turn to when making anything from lemonade to margaritas.
Check Stock

Milwaukee 48-22-3108 Quick Adjust Reaming Pliers, 8-Inch

  • Exposed Reaming Handles - Up to 1-Inch Conduit (Patent Pending).
  • Reaming Head Design - Smooths out rough edges of up to 1-1/2-Inch Pipe (Patent Pending).
  • Quick Adjust Jaws - V-groove jaws create a more precise fit with up to 1-1/2-Inch Jaw Capacity.
  • Forged Alloy Steel - For Maximum Tool Strength.
  • Rust Protection - Increases tool life by reducing corrosion.
Check Stock

PAGOW 1/2\ Hand Reamer, High Speed Steel H7 6 Straight Groove Reamer, Straight Flutes Hand Milling Cutter Tool

  • Premium Material: The material is low alloy steel with high hardenability and low hardenability. The reamer has the characteristics of high wear resistance, less severe cutting and less deformation..
  • Hand Reamer: Reamer for reaming holes have been drilled after processing (or reaming) on the workpiece, mainly to improve the precision of the hole, reducing its surface roughness, is finishing and semi-finishing tool for the hole..
  • Straight Flute Tool: 6 Flutes & Straight Shank. Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts..
  • Application Object: Installed in the lathe for cutting of metal tools. Straight flute hand reamers is used in ferrous metals and most nonferrous metals. Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
  • Application: Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications..
Check Stock

Engineer Square Machinist Square Set Mechanical Steel High Precision Square Woodworking Wide Base Square Tool Wide Sitting Angle Square L-type Measuring Tool for Engineer Student (5 x 3.2 Inch)

  • Nice craftsmanship: our machinist square has bright surface color and smooth base surface, as well as quality material.
  • Without trace, it will let you have a nice and comfortable use experience.
  • Proper size:this machinist square rule is 5 inches in whole length, bottom length is 3.2 inches.
  • The proper size will ensure the accuracy of the measurement data, also allow you to hold the rule easily and firmly.
  • Safe and reliable: this precision square tool use rivet links design, so it will not endanger your safety.
  • Besides, its chassis is heavy, upright and stable, as well as not inclined, so the measurement data is more accurate and easy to read.
  • Nice work performance: the testing machinist square can be applied to various engineering measurements, it can accurately measure the vertical deviation of internal and external angles.
  • The accurate 90 degree angle has no difference, assuring the measurement data correct without error.
  • Easy to identify: machinist steel square is engraved with dimensions and clear numbers, so you can quickly identify the data, which ensures that you can easily measure each right angle.
Check Stock

Machinist Flag Tools - CNC Machine Operator Machining T-Shirt

  • The Machinist Flag Tools - CNC Machine Operator Machining Shirt is perfect for you who are a Machinist. Proud to be a Machinist. Perfect Machinist Gifts, Machinist shirts..
  • A unique gift for your beloved machinists on National Machinist Appreciation Day, Parents' Day, Father's Day, Mother's Day, Christmas or birthday.
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

PAGOW T Handle Taper Reamer, 5-16mm Tapered 6 Hand Held Fluted Chamfer Reaming, Repairman's Bridge Pin Hole Reamer Woodworker Cutting Tools

  • Material: Made of hardened ball bearing steel (#9027) with precision ground cutting edges..
  • Tapered Reamer Diameter:1/8"-1/2"(3-13mm).
  • T-Handle Grip: Provides greater leverage and easier reaming. Provides leverage for easier operation and rotation,saving effort. Removable handle for compact storage..
  • Perfect tool kit for every DIY users to enlarge holes in wood. Suitable for reaming taper holes on wooden boards,chamfering,deburring,easy to screw counterbore..
  • Precision machined cutting edges smooth metal surfaces with little effort. Useful tool for removing burrs from steel, brass, aluminum, plastic, wood and wallboard..
Check Stock

T Handle Tapered Reamer Tool 3-13mm(1/8-1/2 ), 6 Fluted Chamfer Bridge Pin Hole Handheld Chaser, 45# Steel 1/4\ Hex Shank Durable for Chamfering Taper Holes Countersink Latches Guitar

  • CHAMFER REAMING TAPER REAMER: 3-13mm (1/8-1/2) six-blade taper reamer, taper hole, chamfer deburring and other functions, convenient for screw sinking, convenient and quick..
  • PURPOSE 1: Removal of burrs: remove from wood, cut pipes, pipes and ducts. Internal deburring edge tool, the capacity is 1/8" to 1/2"..
  • PURPOSE 2: Enlarged bridge pin hole, headstock, hole for tuner and volume/tone knob.
  • LABOR-SAVING AND CONVENIENT: T-shaped handles can provide leverage, making reaming easier, stronger control, and easier turning.
  • effortlessly processing in sheet metal, plastic and other materials..
  • SIZE: 45#steel, 1/4” Handle 85mm Length + 128mm Length Reamer 3-13mm Reaming diameter range..
Check Stock

RIDGID 29993 227S Stainless Steel Pipe Reamer Tool, 1/2-inch to 2-inch Inner/Outer Reamer

  • Ideal for reaming on stainless steel and copper tubing.
  • 45 cutting edges on the interior cone allow for fast, clean inner reaming and outer deburring and beveling of tubes.
  • Hardened steel construction for maximum durability.
  • dual inch and metric measurement bar for ease of use.
  • Pipe reamer has a 1/2-inch to 2-inch (12 mm to 50 mm) outside diameter capacity.
  • RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.
Check Stock

8 Pcs Swaging Tool Drill Bit Set HVAC Repairing Set Air Conditioner Manual Copper Pipe Swage Tube Tool with Copper Pipe Cutter and Deburring Tool for Copper Aluminum and Thin Stainless Steel Tube

  • ...eburring tool, complete set of tools, very suitable for air conditioning copper pipe flaring operation during HVAC installation, no complicated learning, easy to use..
  • 【Drill size】: 6 different sizes of drill bits, including 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
  • Handle diameter: 7 mm (hexagonal handle), pipe reaming tool is a necessary accessory for repairing air conditioners..
  • 【Mini copper pipe cutter】: 3-28mm (1/8" - 1 1/8") copper pipe cutter can cut copper pipe, steel pipe, stainless steel pipe, aluminum pipe PVC and iron. Note: Cutting PVC pipe is not recommended because it is much more difficult to cut..
  • 【Deburring Tool】: The blade is mounted on the handle can rotate 360 degrees, this tool helps to clean the top of the pipe or tube, it has a compact size and can easily be carried anywhere..
  • 【Why Do You Need HVAC Tools Drill Bit Set】: When connecting copper pipes of air conditioners, the soft copper pipes are expanded by the rotation of the drill bit, so that the two copper pipes are connected without leakage. When used in combination with electric drill and impact drill, it works more efficiently than the round head reaming tool. (The drilling speed should not be too fast.) The drill bit is made of durable and wear-resistan....
Check Stock

VASTOOLS Swivel Head Deburring Tool 6-1/2\ Metal Handle Chamfer Tool Removing Burr from Aluminum Copper Brass Resin and Plastic Pipes

  • This hand deburring tool designed for removing burr from steel, aluminum, copper, brass and plastic pipes.
  • This pipe deburring tool havs a 5" aluminum handle allows for a firm grasp and comfort during extended use.
  • This hole deburring tool makes a great all-purpose finishing tool not only in pvc plastic pipe, but the copper tube as well.
  • This burr removal tool has M2 HSS blade which rotates 360°, swivel head deburring tool delivers high performance and quality.
  • This metal deburring tool can be used for home use, plumbing applications or as a machinist tool in the shop.
Check Stock

uxcell Chucking Reamer 1/4\

  • Specifications: Cutting dia.: 5.6mm / 0.22".
  • accuracy: D4. High-speed steel tool with cobalt is good for general purpose applications.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock.
  • Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Reamer is with high hardness, toughness, wear resistance, long service life.
  • Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

Utoolmart Chucking Reamer 3/4\

  • Specifications: Cutting dia.: 3mm / 0.12".
  • accuracy: H7. Tungsten carbide tool is hardened to 50HRC, good for general purpose applications.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock.
  • Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for applications in shallow cuts. Tungsten carbide reamer is with high hardness and strong wear resistance for long service life.
  • Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

VASTOOLS Deburring Tool Kit 6-1/2 Metal Handle Chamfer Tool for Resin Aluminum Brass Plastic Pipes Tube Hole with Extra 10 HSS Blades

  • This pipe reamer kit contain extra replaceable 10 blades comes in a handy plastic storage case..
  • This hand deburring tool designed for removing burr from steel, aluminum, copper, brass and plastic pipes.
  • This pipe deburring tool havs a 5" aluminum handle allows for a firm grasp and comfort during extended use.
  • This burr removal tool has M2 HSS blade which rotates 360°, swivel head deburring tool delivers high performance and quality.
  • This metal deburring tool can be used for home use, plumbing applications or as a machinist tool in the shop.
Check Stock