Categories

Best Magnet Wire For Power Supply

Dyna-Living Wind Turbine Generator 400W DC 12V 3 Blade Wind Turbine Motor with Charge Controller for Home Use Boat or Industrial Energy(Not Included Mast)

  • [Low Noise and Durable]- The wind turbine motor adopts a three-phase DC permanent magnet synchronous generator, free running, low noise and long service life. Teflon wire is heat resistant, which is not easy to damage the wire when the machine is overloaded. It is smooth in operation, good wind resistance for double-row bearing..
  • [High Wind Energy Utilization]-The coil is made of Teflon wire, which is resistant to high temperatures. It has effective regulation of current and voltage, with high wind energy utilization factor, which contributes to the annual energy output..
  • [High-Quality Blades]-The blade is equipped with a copper inlay part that does not damage the nylon fiber when the bolt is tightened, the blades are not easily deformed or broken. The working temperature is -40 ° C ~ 80 ° C, do not worry about the temperature being too low and causing the leaves to freeze..
  • [Unique Design]- The wind turbine generator adopts a permanent magnet rotor alternator and with a special kind of stator design, efficiently decreases resistance torque guarantees stability. The blades using reinforced glass fiber helped with optimized structure and aerodynamic shape, it enhanced wind power coefficient and power generating capacity..
Check Stock

Sangean PR-D15 Digital Portable Stereo RDS Receiver Gray

  • 10 station presets (5 AM, 5 FM) with built-in Bluetooth wireless Audio streaming and USB MP3/ WMA playback.
  • Easy to read high contrast LCD display with automatic and adjustable backlight.
  • Clock available for FM rds-ct with 2 alarm timers by radio, buzzer or USB Settable alarm volume hws (Humane wake system) buzzer and radio adjustable Nap, Sleep and snooze timers.
  • Rotary bass and treble controls, dynamic bass compensation for rich bass, loudness on/ off with a single 3-inch 7W full range speaker with enlarged Magnet.
  • Full function infrared remote control, FM wire antenna included. For outdoor use, you can power the radio by using a 12V DC input socket from a DC power supply.
Check Stock

Erbium (Er) 24.26mm Metal Disc 99.9% Pure for Collection or Experiments

  • 250mm x 46mm (internal diameter) solenoid. Wound with insulated copper wire.
  • Operating voltage 12V A.C. or D.C. at 6A. Magnetizing by A.C. or D.C. Demagnetizing by A.C. only.
  • Additional requirements: AC/DC Power Supply (12V, 6A), Magnetic Needle, Cylindrical Bar Magnet, Analogue Multimeter.
Check Stock

Sangean WR-22BK AM/FM-RDS/Bluetooth/USB Table-Top Digital Tuning Receiver (Black)

  • 10 station presets (5 AM, 5 FM) with built-in Bluetooth wireless Audio streaming and USB MP3/ WMA playback.
  • Easy to read high contrast LCD display with automatic and adjustable backlight.
  • Clock available for FM RDS-CT with 2 alarm timers by radio, buzzer or USB Settable alarm volume HWS (Humane wake system) buzzer and radio adjustable Nap, Sleep and snooze timers.
  • Rotary bass and treble controls, dynamic bass compensation for rich bass, loudness on/ off with a single 3-inch 7W full range speaker with enlarged Magnet.
  • Full function infrared remote control, FM wire antenna included. For outdoor use, you can power the radio by using a 12V DC input socket from a DC power supply (not Included).
Check Stock

Polk Audio MM 1242 SVC 12 1260 Watt Car/Marine Subwoofer Sub+Amplifier+Amp Kit

  • ... Mounting Height: 0.55" (14.06mm). Mounting Depth (Top): 4.64" (118mm). Mounting Depth (Bottom): 5" (132mm). Peak Power Handling: 1260 Watts. Continuous Power Handling: 420 Watts RMS. Nominal Impedance: 4 Ohms. Frequency Response: 26Hz-200kHz. Sensitivity: 87 dB. Magnet Weight:54.4 oz. Magnet Material:Ceramic. Magnet Size:140mm x 60mm x 25mm. VC Diameter: 2". Enclosure Volumes: Minimum Sealed: 1.25 cu. ft. Maximum Sealed: 3.5 cu. ft. Minimum Vented: 1.75 cu. ft..
  • Maximum Vented: 2.25 cu. ft. RockviIle RXA-T1 1500 Watt Peak/750w RMS 2 ChannelCar StereoAmplifier. CEA Compliant Power Ratings: 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD 1 x 370 Watts bridged @ 4 Ohms < 1% THD. 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x 370 Watts bridged @ 4 Ohms < 1% THD.
  • RMS Power Ratings 750 Watts (2 x 375 Watts RMS) @ 2 ohms 1 x 750 Watts @ 4 ohm Bridged Mono 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. 750 Watts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts ....
Check Stock

Hifonics ZG-1800.1D ZEUS Gamma 1800w Car Audio Class D Mono Amplifier+Amp Kit

  • Crossover Type: Onboard electronic crossover, Electronic Equalizer: Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers, Class/Topology: "Class D, High efficiency with big power in a small footprint, Output Device Technology: PWM MOSFET Power Supply, Stable power through the PC board with minimal heat generation, Heat Sink: Aluminum, Old School Hifonics Heat sink for Superior Heat Dissipation..
  • Power Supply: Simpatico Coil Design, The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices, Output Connections: RCA Outputs, Daisy chain multiple amplifier to eliminate additional signal cables from the source unit, Connection Type: Secure molded connection terminal for all Power, Ground and Speaker connections. Angled for ease of access while creating a clean wire mangement profile..
  • Features of RWK41: 1 - 17' High Grade Twisted Pair of 100% Copper RCA Cable, 17' - 4 Gauge Translucent Blue SuperFlex Power Cables, 17' - 18 Gauge Blue Remote Cable, 17' - 16 Gauge Clear Speaker Wire, 3' - 4 Gauge Clear SuperFlex Ground Wire, Gold Plated AGU Heat Resistant Fuse Holder, 60 Amp AGU Gold Plated Fuse, 7' Split Tube Loom, Accessories Included: ....
Check Stock

TOWODE Wired Magnetic Surface-Mounted Door Window Contact Reed Switch Personal Gap Alarm, Cabinet Strip Light Switch NC DIY Kit, Pack of 10 with 40 Screws

  • 【Reed Switch】 ：IMPORTANT : When the magnet is near it makes connectivity, when the magnet is removed connectivity is broken.Wired magnetic door/windows contact can be added to wireless/wired Alarm Systems.(some wireless system has wired zones).
  • 【No External Power Needed】 ：Connect to wired alarm control panel, GND (Positive) Connect with NC(Negative) ports directly which make signal stability and no trouble for the battery. These Wired Reed Switches means it needs wire to connect with the alarm control panel, but wire is not including in the package..
  • 【Install Distance】 ：Gap between 2 pieces more than 15mm, less than 25mm.White color make home great and beautiful. Anti-fire ABS material..
  • 【Install Attention】：Item CAN NOT connect directly to power, it works with your alarm system provide a switch signal.Working current under 12V..
  • 【What NO NC Means】:NO means Normally Open: when the magnet separate, the circuit is conductive.
  • When the magnet together, the circuit is not conductive. NC means Normally Closed:When the magnet together, the circuit is conductive.
  • when the magnet separate, the circuit is not conductive..
Check Stock

24/20-Pin ATX DC Power Supply Diagnostic/Breakout Board Module

  • 24-pins Standard ATX Connector, support 20 / 20+4 / 24 pins wire header. With latching button switch to control ATX power supply output ON/OFF..
  • Total 16 LEDs, it is convenient for you to diagnose the functions of all pins except COM/GND, therefore, if the output of any one wire of your ATX power supply is faulty, it can be seen at a glance..
  • High quality screw terminal blocks. Each terminal position support current output maximum 10 Amp. Pitch 5.0mm/0.197 inch, Wire range 26AWG to 12AWG / 2.5mm square..
  • Packing list: 1x Diagnostic breakout board, 4x Screws, 4x Nylon spacers..
  • Special Note: The PS_ON LED lights up when the output is OFF and goes out when the output is ON, this is just the opposite of the indication status of other LEDs. Since many new ATX power supplies no longer provide output -5V, the NC/-V LED will not light up when connected to this type ATX power supply..
Check Stock

Bissell Vacuum Cleaner Power Supply Cord

  • 30′ Long Vacuum Cleaner Main Power Supply Cord, 2 Wire, Color Black, 17/2 Wire.
Check Stock

HiLetgo VOT-8 Voltmeter Kit Voltage Meter Electronic Production Suite DIY Kit for Student Electronic Exercise

  • A good exercise for students in electronic production.
  • VOT-8 voltmeter kit by the key switch control in two-wire system or in the three-wire state work..
  • Two-wire system (measured voltage is VOT-8 power supply), the measurement range of 3.5 to 25..
  • Three-wire system (a set of 3.5 ~ 25V voltage for the VOT-8 power supply), the measurement range of 0 ~ 30V..
Check Stock

MLLIQUEA 2500W Long-line Mining Power Supply, 2U Mining Power Supply for 8 GPU BTC/ETH Rig Miner Machine, 110V-264V PSU with 12000 RPM Violent Fan

  • Eth Mining Rig PSU – MLLIQUEA 2500W mining power supply can be the perfect tool for your cryptocurrency mining equipment. Low noise design, about 75dB. Above 110V, output rated power 2000W, above 220V, output rated power 2500W. Supports simultaneous use of multiple graphics cards. NOTE: The power supply cannot be used for ASIC miners with protocols or software. ASIC miners L3+, S9, S9i, S9K, 851/852, H0.1, H0.3 can be used..
  • Upgrade Material – Our mining PSU shell is made of high-quality steel, sturdy and durable, and reusable. The internal wire adopts an upgraded copper core, which is resistant to high temperatures and is more durable than other types of copper core wires, the external material of the power cord fully protects the wire from wear and tear and prevents the interface and graphics card from being burned, reducing your use cost..
  • Energy Saving – This power supply has a conversion efficiency of up to 89 percent , high efficiency, and energy-saving, using new large-capacity large magnetic ring materials, very stable performance, and can be equipped with more powerful mining machines, which is safer.DC circuit design, and is equipped with multiple power protections, offers your system more reliable and stable output voltages, providing ....
Check Stock

2000W Mining Power Supply PSU, ABSKY Mining Rig PSU ATX PC Power Supply for 8 GPU ETH Rig Ethereum Miner, Mining Machine Power Supply with Adapter Cable

  • UNIQUE DESIGN - This mining power supply can be a perfect tool for your Cryptocurrency mining rig. DC circuit design, with stable voltage output..
  • PURE COPPER WIRE - The wire has a copper core that is resistant to high temperatures and more durable than other types of copper core wire..
  • COMPREHENSIVE PROTECTION - Current/Voltage/Power/Temperature Protection, Under Voltage Protection, and Short Circuit Protection provide maximum safety to your critical system components..
  • STABLE AND EFFICIENT - Double Ball Bearings are the industry standard for any power supply expected to carry heavy loads on a regular basis due to their durability and low noise level. Compatible with quality, efficiency and stability balance, pursuing continuous real power output..
  • ENERGY SAVING - The power supply rated output power 2000W, With up to 90% conversion efficiency, high efficiency and energy saving, Using a new large-capacity large magnetic ring material, the performance is very stable, Widely used in variety of mines and high-power single 12V industrial equipment..
Check Stock

Saihisday 12V Car Auxiliary Heater, 4 Ports Universal Underdash Compact Auxiliary Heater, Winter Automotive Air Conditioner for Heating&Defrosting

  • Function: Designed with powerful blower motor and 4 vent holes, this car air conditioner is used as windscreen defroster, demister and heater in winter..
  • Type: 4 Ports Universal Underdash Compact Auxiliary Heater.
  • Fitting Required: 5/8"(16mm) inner diameter water hose..
  • Switch Instruction 1: The red wire of the speed control switch is connected with positive pole of power supply and motor..
  • Switch Instruction 2: The blue wire of the switch is connected with negative pole of motor..
  • Switch Instruction 3: The black wire of the speed control is connected with negative pole of power supply..
Check Stock