Categories

Best Magnet Wire Resistance

Dyna-Living Wind Turbine Generator Kit 400W DC 12V Wind Turbine Motor 3 Blades Wind Power Generator with Charge Controller for Home Marine Industrial Energy(Not Included mast)

  • [High-Quality and Durable]- The 400W wind turbine motor adopts a three-phase AC permanent magnet synchronous generator, free running, low noise and long service life. Teflon wire is heat resistant, which is not easy to damage the wire when the machine is overloaded. It is smooth in operation, good wind resistance for double-row bearing..
  • [Excellent Heat Resistance]-The coil is made of Teflon wire, which is resistant to high temperatures. It has effective regulation of current and voltage, low start-up speed but high wind energy utilization factor, which contributes to the annual energy output..
  • [High-Quality 3 Blades of Wind Turbine Generator]-The blade is equipped with a copper inlay part that does not damage the nylon fiber when the bolt is tightened, the blades are not easily deformed or broken. The working temperature is -40 ° C ~ 80 ° C, do not worry about the temperature being too low and causing the leaves to freeze..
  • [Unique Design]- The wind turbine generator adopts a permanent magnet rotor alternator and with a special kind of stator design, efficiently decreases resistance torque. And the wind turbines match the generators quite well, the blade is designed with aerodynamics to make the rotor run smoothly, quietly and with high wind energy u....
Check Stock

Dyna-Living Wind Turbine Generator 400W DC 12V 3 Blade Wind Turbine Motor with Charge Controller for Home Use Boat or Industrial Energy(Not Included Mast)

  • [Low Noise and Durable]- The wind turbine motor adopts a three-phase DC permanent magnet synchronous generator, free running, low noise and long service life. Teflon wire is heat resistant, which is not easy to damage the wire when the machine is overloaded. It is smooth in operation, good wind resistance for double-row bearing..
  • [High Wind Energy Utilization]-The coil is made of Teflon wire, which is resistant to high temperatures. It has effective regulation of current and voltage, with high wind energy utilization factor, which contributes to the annual energy output..
  • [High-Quality Blades]-The blade is equipped with a copper inlay part that does not damage the nylon fiber when the bolt is tightened, the blades are not easily deformed or broken. The working temperature is -40 ° C ~ 80 ° C, do not worry about the temperature being too low and causing the leaves to freeze..
  • [Unique Design]- The wind turbine generator adopts a permanent magnet rotor alternator and with a special kind of stator design, efficiently decreases resistance torque guarantees stability. The blades using reinforced glass fiber helped with optimized structure and aerodynamic shape, it enhanced wind power coefficient and power generating capacity..
Check Stock

AVAN?100W Permanent Magnet Generator Electric 3-Phase AC Alternator, Rare earth NdFeB Electric Three-Phase alternator Permanent Magnet Generator(Without Rectifier 48V)

  • ...on material, which is called the king of magnets. It is wound with high-grade pure copper wire, which makes the permanent magnet generator more efficient, more stable and safer. reliable..
  • [Good heat dissipation performance]: The three-phase AC generator adopts a special stator and rotor design, and has low starting resistance torque and good heat dissipation performance. The generator has no gears, is directly driven, stable operation, and high safety factor..
  • [Surface spraying technology]: The permanent magnet generator adopts advanced surface spraying technology, which is not only energy-saving, efficient, safe and reliable, but also bright in color and beautiful in appearance..
  • [Die-cast aluminum alloy shell]: The three-phase AC permanent magnet generator adopts a die-cast aluminum alloy shell, and the permanent magnet generator shell is treated with anti-corrosion, which is more resistant to acid, alkali and salt, corrosion, and has a longer service life..
Check Stock

Heyiarbeit 26 AWG Magnet Wire Enameled Copper Wire Enameled Magnet Winding Wire 0.015' Diameter 49 ft Temperature Rating 155¡æ Magnetic Coil for Motors Transformers Inductors 1Pcs

  • 【Parameters】- Inner Diameter: 0.38mm/0.01".
  • 【Material】- The magnet wire is made of high-quality copper, and the insulating coating is polyurethane, which can protect the coiled wire from short circuit and is durable.
  • 【Feature】- Enameled wire has excellent adhesion, thermal stability, mechanical strength, solvent resistance and electrical properties.
  • 【Advantage】- High-quality enameled copper wire, will not break when winding, suitable for your scientific projects, experiments or personal DIY, engineers and enthusiasts can use.
  • 【Application】- The magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire.
Check Stock

Electric Deep Well Solar Submersible Water Pump DC 12V 180W Farm Ranch Submersible Deep Bore Well Water Pump Pure Copper Motor 5.3 GPM Large Flow 82ft High Lift

  • 【HIGH QUALITY PUMP】Stainless steel fuselage, forming the fuselage once, no rust, corrosion resistance, safety and environmental protection. High quality bearings, quiet, smooth operation. High quality screw, increase flow and efficiency. High quality outlet, overall beautiful, not easy to rust..
  • 【PERMANENT MAGNET COPPER MOTOR】Permanent magnet copper motor, magnet steel copper increased by 1cm/0.4'' positive and reverse protection, connecting with reverse non-burning machine. All copper wire motor, safe and durable. Special T-type universal plug for electric vehicles, beautiful atmosphere, easy to use..
  • 【HIGH PRECISION SEALING】High precision mechanical seal, stainless steel spring, high strength, good sealing, low resistance, sand control. Selected sealing ring, good sealing, long service life. Submersible screw should be used in clear water with particle size smaller than FLmm and solid magazine ratio less than 1%..
  • 【MAIN PARAMETERS】Power: 180W, Voltage: 12V DC, Max flow: 5.3 GPM, Max lift: 82ft, Outlet: 1'', Pump diameter: 3.3'', Pump length: 13.7'', Package size: 15'' x 7'' x 4'', Shipping weight: 10 lbs..
  • 【WIDE APPLICATION】High lift, large flow, small size, easy to carry. Suitable for water intake infactories, mines, enterprises an....
Check Stock

SAPHUE Adjustable Metal Double Coil Electric Guitar Pickups Humbucker Punk Neck/Bridge Pickup (Black)

  • Fits most Strat style electric guitar, middle position. Middle pickup is reverse wound/reverse polarity, delivers a humcancelling feature.
  • Genuine Wilkinson parts. 52mm pole spacing, staggered polepiece, fiber bobbin, wax potted.
  • Vintage voiced tone single coil pickup. Alnico V magnets provide incredible focus and dynamics.
  • D.C. Resistance: 6K. Black wire is ground, yellow wire is hot.
  • Package included: 1 Piece Pickup. Note: Our screws maybe will not fit your usage, please use your own if you can.
Check Stock

KICKER 10PS5250 5.25 Harley Davidson Motorcycle Speakers+Waterproof Wire PS5250

  • ... Features of PS5250: PS5250 Compatible with Harley-Davidson Kicker Powersports 5.25 2-Ohm Coaxial Speakers, Weather-proof, high-efficiency coaxials specifically created as fairing drop-ins on motorcycles, Also used with ATV, UTV, marine, or outdoor systems, Also Available in 4-Ohm resistance for compatibility with 2006-newer Compatible with Harley-Davidson OEM head units (See PS52504), Extremely powerful to be heard over the roar of the road while wearing a helmet.
  • Midbass neodymium magnet structure provides high output at low weight, Incredibly detailed, high-power, 20mm neo-titanium-dome tweeters, Bridge-mounted tweeters suspended over the midbass cone to limit extreme vibration, At a mere 12 ounces per speaker, a bikes center of gravity remains low for proper handling, Weather-proof materials designed to withstand the outdoor elements, Includes specific replacement grilles for Compatible with Harley-Davidsons Bat-wing fairing.
  • Features of MARINE 16G50: RockvilIe MARINE 16G50 OFC 16 Gauge 50 Foot 100% Copper Speaker Wire White, Tinned coating makes this wire marine grade and protects it from corrosion, This is a 100% copper cable....
Check Stock

Fender Custom Shop 62 P Bass Pickups

  • Enamel-coated magnet wire and cloth-covered output wires.
  • Deliver the full, booming lows, punchy midrange and clear high end of the bass that started it all.
  • DC Resistance: 10.5K, Inductance: 5.9 Henries.
Check Stock

American Bass XR15D4 15 3000 Watts Dual 4 Ohm 3 Voice Coil

  • 1500 Watts RMS 3000 watts peak 300 oz magnet coated paper cone direct 8 gauge speaker wire.
  • Superior quality performance and reliabilitySpecifications.
Check Stock

Fender 75 Jazz Bass Bridge Pickup

  • The Original Jazz Bass pickups deliver the low-end growl and up-front midrange punch that makes the Jazz Bass as popular today as it was when it was introduced over forty years ago.
  • These pickups are make with flush-mounted Alnico 5 magnets, enamel-coated magnet wire, and a copper shield.
  • Bridge: DC Resistance: 7.5K, Inductance: 3.35 Hernias.
Check Stock

American Bass TITAN1544 15 Woofer 800w Rms/1600w Max Dual 4 Ohm Voice Coils

  • 1500 Watts RMS 3000 watts peak 300 oz magnet coated paper cone direct 8 gauge speaker wire.
  • Superior quality performance and reliabilitySpecifications.
Check Stock

Wilkinson Variable Gauss Ceramic Traditional Precision Bass Humbuckers Pickups Set for PB Style Electric Bass Black

  • Fits most PB style electric bass, like Fender/Squier Precision Bass or similar bass.
  • Genuine Wilkinson parts. 28.5mm pole spacing, wax potted.
  • Classic tone with our new Var-Gauss technology: Bass frequencies keep their deep growl while the treble sounds are smoother but still defined.
  • Magnet: Ceramic. D.C. Resistance: 8.5K. Two conductor wires, black wire is ground, white wire is hot.
  • Package included: 2 Pieces Pickups. Note: Our screws maybe will not fit your usage, please use your own if you can.
Check Stock

BNTECHGO 28 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0122\ Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 28AWG magnet wire is 4 ounces(527 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 28 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0122"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock