Best Magnetic Coil

Power Acoustik 12" Woofer Dual 4 Ohm 2500W Max

  • Overcompensating Motor Structure for Increased Magnetic Strength, 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics, Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up, Die-Cast Aluminum Heat Sink Dust Cap Absorbs Voice Coil Heat, Aluminum Dust Cap Fins Dissipate Heat & Strengthen Cone.
  • Non-Magnetic Non-Resonate Die-Cast Aluminum Frame, 2.5” 4-Layer Voice Coil w/ Large Gauge Wire Increases Power, High-Temperature Tolerance Adhesives Resist Thermal Failure, Nickel Plated 8ga Spring-Loaded Compression Wire Terminals, Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection.
  • High-Density Polyether Foam Surround w/ UV & Chemical Protection, Dual Poly-Cotton Suspension Dampen Violent Accelerations, Stitched Voice Coil Leads Prevent Potential Damage, 1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included.
  • Efficiency (1w/1m): 86.50, Voice Coil Configuration: 2.50″ Dual 4Ω, Motor Volume: 254oz Re: 7.230Ω Fs: 28.60Hz Qes: 0.416 Qms: 4.722 Qts: 0.383 Diameter: 12”.
  • Vas: 1.69ft3 Bl: 24.55tm Mms: 200.815g Cms: 152.013 Sen: 86.56db MAX Power: 2,500w RM....
Check Stock

ICZW Induction Heater 1500W Magnetic Automotive Flameless Heating Handheld Bolt Removal Rusty Screw Removing Tool 110V

  • 【Induction heater coil kits】This 1.5KW induction heater comes with Φ20mm*1, Φ26mm*1, flat coil*1, DIY coil*1, is suitable for heating various rusty bearings and nuts. Compared with 1000W induction heater, the coil is thicker and more durable.
  • 【Safety】Flameless heating,This induction bolt heater has excellent performance, adopting high frequency magnetic field to heat metal only by induction heating.
  • 【High Efficiency】Separate design that makes this magnetic induction heater can heat continuously for 6 minutes. Heat the object to 800℃ in 5-40 seconds by 1.5KW high power.
  • 【Easy to use】One-touch switch with a handle that conforms to manual mechanics for easy operation and movement.
  • 【Application】 Adopting electromagnetic induction theory, it can fast heat small metal parts of automobiles or machines. Mainly used for heating rusty/frozen/corrosive bolts, nuts, fasteners, suspension nuts, gears, pulleys, bearings, etc., but also helps remove car stickers.
Check Stock

MB Quart - Two Pairs of Formula 5x7 / 6x8 Inch 2-Way Coaxial Car Speakers - FKB168

  • Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact. Voice Coil: Pure Copper voice coil creates a strong magnetic....
  • Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat..
  • Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process..
  • Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response..
  • Cooling System: Over-coil cooling system allows air exchange over the voice coil through the spider..
Check Stock

Soundstream 2000W Peak (1000W RMS) 12' Tarantula Dual 4-Ohm Car Subwoofer

  • Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke and Top Plate Improve Low Frequency Dynamics | Vented T-Yoke and Frame Reduces Voice Coil Heat Build Up.
  • Non-magnetic Non-resonate Die-Cast Aluminum Frame | 3" 4-Layer Voice Coil with Direct Connect Wire Increases Power Handling | High Temperature Tolerance Adhesives Resist Thermal Failure.
  • Non-Transfer Spruce Pulp Cone with UV and Chemical Protection | Stitched and Glued Surround/Cone Joints for Strongest Bonding | Extended Excursion Polyether Foam Surround with UV and Chemical Protection | Dual Poly-Cotton Suspension Dampen Accelerations.
  • 1-pc Gasket / Trim Ring with Concealed Mounting Holes Included | RMS Power Handling: 1,000W | Max Power Handling: 2,000W | Voice Coil Impedance: 4-Ohm + -Ohm.
  • Mounting Depth: 7.25" | Optimum Sealed Box Volume: 1.50ft3 | Optimum Ported Box Volume: 2.50ft3.
Check Stock

MB Quart - Pair of Formula FSB216 6.5 Component Speakers and A Pair of Formula 6x9 Speakers FKB169

  • Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact. Voice Coil: Pure Copper voice coil creates a strong magnetic....
  • Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat..
  • Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process..
  • Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response..
  • Cooling System: Over-coil cooling system allows air exchange over the voice coil through the spider..
Check Stock

Soundstream X5.15 Team 15' Tarantula 7500W Dual 1 Ohm Subwoofer Bass Speaker

  • Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke and Top Plate Improve Low Frequency Dynamics | Vented T-Yoke and Frame Reduces Voice Coil Heat Build Up.
  • Non-magnetic Non-resonate Die-Cast Aluminum Frame | 3" 4-Layer Voice Coil with Direct Connect Wire Increases Power Handling | High Temperature Tolerance Adhesives Resist Thermal Failure.
  • Non-Transfer Spruce Pulp Cone with UV and Chemical Protection | Stitched and Glued Surround/Cone Joints for Strongest Bonding | Extended Excursion Polyether Foam Surround with UV and Chemical Protection | Dual Poly-Cotton Suspension Dampen Violent Accelerations.
  • 1-pc Gasket / Trim Ring with Concealed Mounting Holes Included | RMS Power Handling: 1,000W | Max Power Handling: 2,000W | Voice Coil Impedance: 4-Ohm + -Ohm.
  • Mounting Depth: 9.25" | Optimum Sealed Box Volume: 2.00ft3 | Optimum Ported Box Volume: 4.00ft3.
Check Stock

Power Acoustik BAMF-124 12 Inch 3500 Watt Max 1750 Watt RMS Car Audio Subwoofer Speaker with 3 Inch Dual Voice Coil and Vented T Yoke (2 Pack)

  • 2 PACK OF POWERFUL SUBWOOFERS: 2 pack of 12-inch, 3500-watt subwoofer with an overcompensating motor structure for increased magnetic strength.
  • IMPRESSIVE PERFORMANCE: 12-millimeter T-yoke and top plate improve low-frequency dynamics.
  • 3-inch, 4-layer voice coil with direct connect wire increases power handling.
  • PROTECTION FEATURES: Vented T-yoke and frame reduces voice coil heat build-up.
  • High-temperature tolerance adhesives resist thermal failure.
  • Stitched voice coil leads prevent potential damage.
  • Non-transfer Spruce pulp cone with UV and chemical protection.
  • DURABLE DESIGN: Non-magnetic, non-resonate die-cast aluminum frame is lightweight yet durable.
  • Stitched and glued surround and cone joints for strongest bonding.
  • INCLUDES: 2 1-piece gasket/trim Ring with concealed mounting holes included.
Check Stock

(2) Pairs MB QUART FSB216 6.5' 280 Watt Car Audio Component Speakers

  • ...55 Hz - 20 kHz. Sensitivity: 88 dB. Crossover Point: 2 kHz. Crossover Slope: 12 dB. Tweeter Dome Material: Aluminum dome tweeters deliver great sound with increased reliability.
  • Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact. Voice Coil: Pure Copper voice coil creates a strong magnetic field with a very thin extrusion. Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat. Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process. Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response.
  • Surround/Cone Coupling: The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather. Gasket: A textured ABS gasket assures a rigid linear seal to the mounting surface. Tinsel Leads: Highly conductive while remaining flexible during high power applications. Cooling System: Over-coil cooling system allows air exchange over the voice coil through the spider.
  • External Component Crossover: External Passive Butterworth crossover for a smooth transition of frequencies from midrange/midbass to the tweeter element designed....
Check Stock

Soundstream AF.694 Arachnid Full Range 6x9' 4-Way 500W Speakers,Black and Silver

  • Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke and Top Plate Improve Low Frequency Dynamics | Vented T-Yoke and Frame Reduces Voice Coil Heat Build Up.
  • Non-magnetic Non-resonate Die-Cast Aluminum Frame | 3" 4-Layer Voice Coil with Direct Connect Wire Increases Power Handling | High Temperature Tolerance Adhesives Resist Thermal Failure.
  • Non-Transfer Spruce Pulp Cone with UV and Chemical Protection | Stitched and Glued Surround/Cone Joints for Strongest Bonding | Extended Excursion Polyether Foam Surround with UV and Chemical Protection | Dual Poly-Cotton Suspension Dampen Accelerations.
  • 1-pc Gasket / Trim Ring with Concealed Mounting Holes Included | RMS Power Handling: 1,000W | Max Power Handling: 2,000W | Voice Coil Impedance: 4-Ohm + -Ohm.
  • Mounting Depth: 7.25" | Optimum Sealed Box Volume: 1.50ft3 | Optimum Ported Box Volume: 2.50ft3.
Check Stock

Audio-Technica AT33PTG/2 Dual Moving Coil Turntable Cartridge

  • Moving coil cartridge with Microlinear stylus delivers exquisite, full-range audio reproduction.
  • Advanced tapered boron cantilever and reduced coil weight improve the audio quality, particularly in the higher frequencies.
  • Neodymium magnet and permendur yoke dramatically enhance the magnetic energy.
  • PCOCC (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer.
  • High-separation, wide-response dual moving coil. Recommended Load Impedance: More than 100 ohms (when head amplifier is connected).
Check Stock

Coil Tattoo Machine, Precision Antique Brass Liner Tattoo Machines, Rotatory Tattoo Machine for Liner Shader with 10 Wrap Coils

  • 【Antique Brass Material】: Coil tattoo machine uses antique brass material, strong and durable, good electrical and magnetic conductivity, simple and smoothly lines..
  • 【Strong Magnetic Force】: Coil tattoo machine adopts 10 wraps solenoid valve technology, with strong magnetic force, stable movement, and less jitter.Have good conductive and magnetic properties, simple and smooth lines..
  • 【Long-Time Working】: Tattoo machine has high performance strong motor, can work long hours without burning.Suitable for lining and shading use, great tattoo tool for professional tattoo artists or beginners..
  • 【Stable Voltage】: 8V/7500RPM, 3-5V starting voltage and 6-9V working voltage, convenient to use.Suitable for both cartridge needle tattoo handle and ordinary tattoo handle, satisfy different needs..
  • 【Accurate Size】: Frame is formed by precise linear cutting and machining, ensuring the precision of size and avoid the size error of manual machine..
Check Stock

2 x BXW-124 4800 Watt 12' Subwoofer 4+4 Ohm DVC Pro Car Audio Bass

  • Max Power: 2400W Per Woofer RMS Power: 1200W Per Woofer.
  • Impedance: 4+4 Ohm Dual Voice Coil Voice Coil: 2.00" 4 Layer Voice Coil.
  • 87.5dB EfficiencyOversaturated motor structure for increased magnetic strength 8mm top plate & vented t-yoke improves low-frequency dynamics.
  • Nickel-plated spring-loaded compression wire terminals High-temperature tolerance adhesives resist thermal failure.
  • poly-cotton suspension dampens violent accelerations stitched voice coil leads to prevent potential damage.
Check Stock

PARTSRUN New Ignition Coil for STL MS311 MS391 MS311Z MS391Z Chainsaw Replaces 1140 400 1303 1140 1305 B with Spade connector,ZF-IG-A00174

  • Our factory uses magnetic motor to test the ignition coil angle.
  • Digital microscope inspection circuit board.
Check Stock