Categories

Best Magnetic Sheet Metal Welding Clamp

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

BAYTORY Upgrade Magnetic Welding Support Ground Clamp Tools, Welding Magnet Head Strong Magnetism Large Suction, Copper Tail Welding Accessories Stability Clamps

  • Check out this handy Fix-tite Magnetic Welding Ground Clamp. A device that speeds up grounding chores for welders..
  • NO-HASSLE SAFETY SETUP - You no longer have to waste your time finding, placing or removing a ground point for a welding job. This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld..
  • STRONG MAGNETIC GRIP - This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Now that you've got this, you won't have to take minutes searching for a good ground or attaching grounding tabs..
  • OFFERS CONVENIENCE - Sometimes you're faced with a welding job that has limited options for ground points. You don't want to have to damage a car's paint job simply to affix a safety line. This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table..
  • Material: Copper / insulation board. Durable and solid.With copper tail with good welding stability..
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

200A Magnetic Welding Ground Clamp, 200A On/off Adjustable Magnetic Welding Ground Clamp Rare Earth Switchable Magnet Welding Holder,Grounding Magnet Connector

  • Magnetic Welding Ground Clamp: Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces..
  • 200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off..
  • Easy to Use: Strong grip on flat or round iron surfaces. The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use..
  • Package Included:1 x Welding Ground Clamp.
  • Warm Tips: Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials..
Check Stock

4Pcs 4\ 55 lbs Arrow Welding Magnets Metal Working Mig Tools and Equipment Magnetic Welding Clamps Workshop Welder Soldering, Can be used for household, industrial welding, iron metal bracket fixing

  • STRONG POWER: The suction power is strong, the material is solid, it is 2.5 times the suction power of the ordinary fixator, and the suction power reaches 55LBS.
  • Safety & Safety: These welding fixtures clamp the metal to keep it at the angle you need to work safely and effectively. The welding fixture adopts strong and durable galvanized sheet, which is sturdy, corrosion-resistant and has stronger magnetic force..
  • THREE ANGLES: Heavy-duty arrow design steel magnet supports material at 45°, 90°, and 135° for easy access. Can be used as double sided holder for welding, assembly and marking work.
  • MULTIPURPOSE: They connect parts, freeing up your hands for efficanciacy work and improve work safety, and it can also be used as a floater to separate steel plates.
  • Regarding service: SHANGHUI Magnet provides unconditional return and exchange of goods in question. If you need help, please contact us by email, and we will provide solutions within 24 hours..
Check Stock

TRRAPLE Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, 2/4 Pcs Durable Stainless Steel Tab Holder Corner Butt Welding Panel Clamps Tools

  • HIGH QUALITY WELDING CLAMPS -- Our v-type magnetic welding clamps are made of made of high quality stainless steel, sturdy and durable, can be used for a long time..
  • MAGNETIC HOLDERS -- One rare earth magnets in each pad provide secure gripping power for rapid, and convenient, holding and positioning..
  • EASY TO USE -- Pads pivot to hold onto round, square, or flat metal surfaces, easy to install and apply..
  • PERFECT SPOT WELDING CLAMP -- Hold tabs, gussets, plates and odd shaped pieces in position for tack welding..
  • WIDELY APPLIED -- Widely used on doors, tool boxes, windows, wooden case, furniture and so on..
Check Stock

OBPSFY 5 PCS Magnetic Welding Clamps Set,Adjustable V-Pads Fixture Clamp Hand Tools,Magnets On Both Pad Face and Bottom

  • 【Welding Clamp】* Hold tabs,pipe, gussets, plates and odd shaped pieces in position for tack welding.Light duty & tight spot holding! Build, Hold, and Position Steel.Magnetic tack welding Tool，make welding easier..
  • 【Strong Hand Tools】* Adjustable welding magnet, Magnetic welding holder, hold and position round, flat, and square parts in light duty substructure applications! Time saving magnetic tools for welding..
  • 【Material】* The magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.Magnets on both pad face and the bottom,Can hold the workpiece well for welding work..
  • 【Note】* Avoid Pronlonged exposure to high heat. The Magnets may demagnetize with temp. exceeding 185°F.（Heat Warning）.
  • 【Package】* 5 Pack Magnetic Welding Clamps（2" ，Pull Force 12 lbs.）.
Check Stock

VIVOHOME MIG Welder 130 Flux Core Wire Automatic Feed Welding Machine Portable No Gas 110V DIY Home Welder w/Free Mask Black

  • NO REACTION WELDER – With convenient flux-cored wire to self-release metal inert gas while welding, this welding machine prevents oxidation of the welded part.
  • A great choice for home repairs and hobby projects on light gauge steel.
  • WELDING PROCESS – This welding machine is particularly well-suited for projects of mild steel and stainless steel.
  • It delivers a professional finish for any thin steel welding or auto body work you may need, being powerful and efficient.
  • ADJUSTABLE WELDING SPEED – The VIVOHOME MIG Welder features 4x current flow settings.
  • Adjust the current and 10-speed variable feed controls for perfectly managed flux-cored welding of thin steel, stainless or aluminum sheet metal, or even thicker steel.
  • PORTABLE DESIGN – Lightweight and compact design, with a comfortable hand grip that makes it easy to carry wherever you want.
  • It only weighs 34.6 lbs., so you can effortlessly take it as far as you can.
  • ACCESSORIES INCLUDED – The VIVOHOME MIG Welder package includes all the accessories you need to weld like a pro: 1x 6.6′ welding gun with on/off safety control.
Check Stock

VIVOHOME MIG Welder 130 Flux Core Wire Automatic Feed Welding Machine Portable No Gas 110V 120V AC DIY Home Welder w/Free Mask Yellow

  • NO REACTION WELDER - With convenient flux-cored wire to self-release metal inert gas while welding, this welding machine prevents oxidation of the welded part.
  • A great choice for home repairs and hobby projects on light gauge steel.
  • WELDING PROCESS - This welding machine is particularly well-suited for projects of mild steel and stainless steel.
  • It delivers a professional finish for any thin steel welding or auto body work you may need, being powerful and efficient.
  • ADJUSTABLE WELDING SPEED – The VIVOHOME MIG Welder features 4x current flow settings.
  • Adjust the current and 10-speed variable feed controls for perfectly managed flux-cored welding of thin steel, stainless or aluminum sheet metal, or even thicker steel.
  • PORTABLE DESIGN - Lightweight and compact design, with a comfortable hand grip that makes it easy to carry wherever you want.
  • It only weighs 34.6 lbs., so you can effortlessly take it as far as you can.
  • ACCESSORIES INCLUDED – The VIVOHOME MIG Welder package includes all the accessories you need to weld like a pro: 1x 6.6' welding gun with on/off safety control.
Check Stock

TEKTON Locking Pliers Set, 6-Piece (Straight Jaw, Curved Jaw, Long Nose) | PLK99903

  • Includes 2-pc. straight jaw locking pliers: 5, 10 in..
  • 2-pc. curved jaw locking pliers: 5, 10 in..
  • 2-pc. long nose locking pliers: 6, 9 in..
  • Straight jaw pliers clamp flat stock, L-angle, and sheet metal for welding or assembly.
  • Curved jaw pliers with straight tips grip round, square, and hex shapes, flat stock, and sheet materials.
  • Long nose pliers reach into narrow spaces to hold thin flat stock and sheet metal in position.
  • Pull-type release lever works like a trigger for controlled one-handed operation and fast repositioning.
  • Generously sized tension adjustment knob offers a large, nonslip knurled surface and a through hole for added leverage with a second tool.
Check Stock