Categories

Best Magnetic Socket Holder

OEMTOOLS 23127 Portable Magnetic Socket Organizer 3 Pack, 1/4 Inch, 3/8 Inch, And 1/2 Inch Drive Socket Organizer, Magnetic Socket Tray Set of 3

  • Your Socket Solution: House up to 76 sockets with this magnetic and portable socket organizer 3 pack.
  • Always have the sockets you need at your fingertips.
  • Secure Grip: Powerful rare earth magnets in each socket organizer tray holds components securely in place.
  • Never worry about small tools falling out or getting lost.
  • Durable Construction: This magnetic socket storage set works as hard as you do.
  • Each portable socket organizer is designed with high impact plastic and has an integrated handle.
  • Always Accessible: Take your sockets anywhere the job takes you with this magnetic tool organizer set.
  • Fit them in your drawer, toolbox, truck, or even hang them on the walls of your garage.
  • Specifications: Magnetic socket holder 3 pack.
  • Compatible with 1/4 inch, 1/2 inch, and 3/8 inch drive standard, impact, deep, or shallow sockets in both metric or SAE.
Check Stock

Pops Sticky Adhesive Replacement for Car Mount, Volport 6 Pack 3M Dots VHB Sticker Pads Double Sided Tape for Socket Base and Magnetic Dashboard Cell Phone Holder with 2 Pack Round Metal Plate Discs

  • ADHESIVE PADS FOR DASH MOUNT: 6pcs small 3M circles dots kit is designed for the base of expanding socket mount, collapsible grip stand, magnetic dashboard car mount, cell phone finger ring holder, wireless charger mount, dash cam mount, windshield mount.
  • Mini foam glue tapes high temperature resistant, no problem in hot/heat/warmth summer in florida. With this backup stickies adhesion replacement parts, you can replace and reattach phone socket wall mount and magnetic vehicle/truck/uber mount..
  • HOW TO USE 3M VHB ADHESIVE PAD: 1. Remove the used adhesive and clean up the mounting surface with alcohol pad if you have.
  • 2. Peel off the yellow backing film, stick adhesive to the back of mount and press firmly for 3 to 5 minutes for better connecting to the car mount base.
  • 3. Peel off the red backing film, stick on the flat and clean surface you want, then wait 24 HOURS to use after stuck, that’s it..
  • TIPS for USING 3M STICKY ADHESIVE: 1.If the red backing film hard to peel off and the black gel come up with, please repeat this act: peel-if come up-press red film back-peel again. 2.Do not stick adhesive on rugged, texture silicone surface, it may not stick well, clean flat and hard surface will be better. 3. Last but the most important point, please....
Check Stock

Lisle 40210 Black Magnetic Socket Holder for 3/8' Socket,Green

  • Lisle 40210 Black Magnetic Socket Holder.
  • Twenty-eight socket compartments that allow you to keep your 3/8" standard and deep sockets in one convenient holder..
  • Design of holders leaves sockets exposed for easy identification..
  • Powerful magnets securely hold sockets in tray, and tray to any steel surface..
  • Made of strong ABS plastic. Fits most 3/8" socket sets..
Check Stock

Mysterious Airframe

  • BEST MAGNETIC CELL PHONE HOLDER FOR CAR: Using one hand, our sleek and minimalistic universal magnetic car phone mount design features a push-button....
  • SMALL BUT MIGHTY: Weighing in at 1.4 oz, and measuring just 1.75 inches wide, our Airframe Magnetic is one the world's smallest, most portable....
  • HOLDS TIGHT AT ANY ANGLE: Our patented car phone holder mount has a ball-and-socket joint that rotates 360 degrees for landscape or portrait....
  • POCKET-SIZE & PORTABLE: The Airframe Magnetic is uniquely small and lightweight, making it the perfect size to fit comfortably within your shirt or....
Check Stock

MulWark 16PC Magnetic Nut Driver Set - 1/4” Hex Head Impact Driver Bit Set |SAE and Metric Screwdriver, Manganese Phosphate Blackening Nut Setter Drill Bit Tools W/ Impact Socket Adapters & Bit Holder

  • Package Included: The magnetic nut driver set contains commonly used models Metric: 8mm, 10mm, 11mm, 12mm, 13mm, 14mm( 1pc of each), SAE: 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″( 1pc of each), 3pc impact socket adapters( 1/4″, 3/8″, 1/2″) and 1pc 1/4″ hex shank magnetic bit holder.
  • Manganese Phosphate Blackening: Nut setter set is made of CR-V steel construction with manganese phosphate blackening for good stability and rust resistance, besides, its corrosion resistance is 10-20 times better than traditional blackening.
  • Strong Magnetism: Magnet inside sockets retains bolt head or nut in socket and the socket is deep enough so you don't drop screws, this lets you use these hand tools with just one hand for convenience and makes it easier to secure a bolt or screw.
  • Smart Storage: Nut driver bit set comes with a plastic storage organizer strip labeled which is printed with the model number for identification. Keep your nut driver set organized and easily notice when one piece is missing.
  • Impact Socket Adapter: 3 sizes impact socket adapters and 1pc magnetic bit holder are included and they can meet the requirements of a variety of impact drivers include the power drill, spanners, drills, detent balls, and so on..
Check Stock

WORKPRO 3/8-inch Magnetic Socket Organizer Set 2-Piece SAE & Metric Socket Holders Holds 52 Standard and Deep Sockets for Tool Box Tool Carts Sockets Not Included

  • Powerful Magnetic to Store Sockets Anywhere: Magnetic socket organizer keeps your sockets neatly stored in drawers or mounted on the side of a tool cart. The sturdy ferrite magnet base has a strong magnetic force to keep your socket in the tray and secure the tray to any ferromagnetic surface..
  • High Capacity & Clear Specifications: The WORKPRO Magnetic Socket Organizers accommodate both SAE and metric sockets, and can store up to 52 metric and SAE sockets (6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"). Bring all the sockets together in one organizer for efficient and orderly work..
  • Scratch-Free Mounting: Choose this magnetic socket organizer to protect other items in your garage or tool room from fraying with the storage sleeve. The material of PP+PVC soft magnet can avoid scratches to the greatest extent, and the magnetic base with rubber at the bottom will not scratch any of your tool surfaces..
  • Fit for Standard & Deep Sockets: Each magnetic socket holder is designed to securely store deep and standard metric&SAE sockets. Multiple size options allow your sockets to take their place and keep your work environment....
Check Stock

WORKPRO 1/4-inch Magnetic Socket Organizer Set, 2-Piece SAE & Metric Socket Holders, Holds 52 Standard and Deep Sockets for Tool Box, Tool Carts (Sockets Not Included)

  • Powerful Magnetic to Store Sockets Anywhere: Magnetic socket organizer keeps your sockets neatly stored in drawers or mounted on the side of a tool cart. The sturdy ferrite magnet base has a strong magnetic force to keep your socket in the tray and secure the tray to any ferromagnetic surface..
  • High Capacity & Clear Specifications: The WORKPRO Magnetic Socket Organizers accommodate both SAE and metric sockets, and can store up to 52 metric and SAE sockets (4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8" ). Bring all the sockets together in one organizer for efficient and orderly work..
  • Scratch-Free Mounting: Choose this magnetic socket organizer to protect other items in your garage or tool room from fraying with the storage sleeve. The material of PP+PVC soft magnet can avoid scratches to the greatest extent, and the magnetic base with rubber at the bottom will not scratch any of your tool surfaces..
Check Stock

Magnetic Phone Charger Cigarette Lighter-[Upgraded Clip] Portable Car Wireless Cigarette Lighter Charger Fast Charge Magnetic Phone Stand Bracket Universal Dashboard car Mount

  • ⭐ UNIVERSAL COMPATIBILITY : Magnetic Phone Holder suitable for most vehicles, it combination of wireless charger, mobile phone holder and USB charging interface..
  • ⭐RELIABLE and DURABLE: This unique product is made with the best innovative materials - a high-quality flexible ABS for the perfect four-clamp grip, strong metal frame built to last, and a quality flat silicon surface for page and strong hold, this all-in-one product will keep your phone healthy from a bumpy road. The rubberized exterior increase grip power and protect air vent from scratching..
  • ⭐QUALITY ASSURED：Magnetic Phone Stand with over current, over voltage, high temperature, short circuit and over charge protection. The wireless charger can be rotated 180 degrees, you can adjust it to the proper angle and tighten the knob..
  • ⭐ATTENTION: Easy to install, you can easily clip this magnetic car bracket to the cigarette lighter socket and it's easy to install with a simple snap..
  • ⭐SUPER STRONG : Cigarette Lighter Charger is mini size, but the magnetic car mount comes with extremely strong Magnet, providing strong magnet suction power. It can hold big phones steadily. Meanwhile, the closed magnetic field would not affect the phone signal. Totally free your hands and keep healthy wh....
Check Stock

DURATECH 4 Pack 12' Magnetic Tool Holder Strip, Heavy Duty Magnetic Tool Bar, Magnetic Space Saving Tool Organizer with Mounting Screws for Garage, Workshop, Kitchen

  • 【GET RID OF MESSY TOOLBOX】The magnetic tool holder keep your tools and other metal objects organized and in one place. The magnetic bar takes very little space, and using it will help you get rid of messy toolbox, easily hold your wrenches, screwdrivers, spanners and keep them organized..
  • 【MAGNETIC TOOL HOLDERS】 12 inch heavy duty tool holder bars with strong magnet, each bar can hold about 22 lbs. For having a larger weight capacity, you can install multiple magnetic tool bars side by side. Our magnetic tool bar is made of premium alloy steel, which guarantees magnetic tool organizer is sturdy and durable..
  • 【EASY TO INSTALL】Simply use the included mounting screw to fix the tool organizer bracket to the wall of your garage, workshop or shed. The magnetic tool holder is also expandable by connecting multiple strips..
  • 【WIDE APPLICATION】The heavy-duty magnetic tool rack is efficient magnetic tool organize for garages, workshops, kitchens. You can use them hold knives and cutlery in your kitchen, or screwdrivers, saw blades in your workshop, or socket and ratchet handle in your garage..
  • 【PACKAGE INCLUDING】The magnetic tool bar set including 4 pieces of 12-inch strips, brackets, and mounting screws. Save counter and drawer space with ....
Check Stock

Car Charger Car Wireless USB Cigarette Lighter Charger Adapter Splitter Fast Charge Magnetic Phone Stand Bracket Holder

  • ...e stand provides the best viewing angle.
  • ❤️[Multi Protection]-Car wireless cigarette lighter charger with over current, over voltage, high temperature, short circuit and over charge protection..
  • ❤️[Easy to install]-This wireless car charger cigarette lighter holder is easy to install, you can easily clip this magnetic car holder to the cigarette lighter socket..
  • ❤️[2 in 1]-a combination of wireless charger, mobile phone holder and USB charging port. Small size, light and portable, easy to carry and store..
  • ❤️[Easy to carry]: The car charger is light and portable, easy to carry and store. It is a combination of wireless charger, mobile phone holder and USB charging interface.
  • ❤️[Angle Adjustable]-The wireless charger can be rotated 180 degrees, you can adjust it to ....
Check Stock

enGMOLPHY Compatible with iPhone 12/13Mag-Safe Base Plate, Magnetic POP Base【Removable for Wireless Charging】, Mag Safe Accessories Designed for P-Sockets or Phone Ring Stand （Silver）

  • Compatibility: With built-in magnets that align perfectly with iphone12/13/12/13mini/12/13Pro/12/13 Pro Max,as well as Compatible with magsafe cases only..
  • Wireless Charging Achievable：If you needed a method to install a ring holder or grips on it and still be able to use your magnetic charger.Strong magnets securely hold your P-socket in place and makes wireless charging a snap. Mag-safe metal plate offers a magical attach and detach experience (NOTE:grip not included).
  • Small, Slim and Portable: Overall setup is Only 0.1in thickness. Seamless magnetic attachment doesn’t slip and the aluminum also makes this product very premium. This was the perfect accessory and defiantly replaced having the normal adhesion of a socket..
  • Multifunctional: You can hassle-free be used for various DIY Mag-Safe accessories to the iPhone 12. Except P-socket & phone ring holder, you can also use it for DJI Osmo 4 camera gimbal and car magnetic stand (Need stick a metal plate on the Mag Safe Base)..
  • What You Get：1* Magnetic Ring Stand Base. As well as our Lifetime Warranty Service. Offering you a FULL REFUND or NEW REPLACEMENT for any quality-related problems. Any dissatisfaction, please feel free to contact enGMOLPHY first via Amazon message and we promise we will ....
Check Stock

26Pcs Flexible Drill Bit Extension Set,Drill Bit Holder Extension,105° Right Angle Drill Attachmentt,1/4 3/8 1/2"Impact Driver Rotatable Socket Adapter,Bits Holder,Bendable Drill Bit Extension

  • ...vy-duty chrome vanadium steel. Set of drill including 1 x Screwdriver Bits Holder Set(6pcs 1/4 hex shank handle keychain extension rod with a black metal hanging buckle)2 x flexible drill extension, 1 x 105° right-angle drill bit extension, 3 pieces of (1/2, 3/8,1/4) universal socket adapter kit, 3 x quick release magnetic drill extension Pieces, 10 in 1 set combination screwdriver bit set, durable, and can be used for a long time..
  • [1/4inch Hex Shank Screwdriver Bits Holder Set] ---- Bits hold/quick change, Can avoid accidental dropping of tools and facilitate high-altitude operations.Application--Universal 1/4" quick hex shank and 1/4" hex socket keep different commonly used 1/4 bits handy. Fit most electric drivers, hand-held drivers and bits, like t25 and t20 bits etc.Large Load-- cancarry bits tools up to 500g in weight. To keep the drill bits not easy to fall.It is made of aluminum alloy, nice durability, lightweight, sturdy, which ensure their longevity..
  • [105° Right Angle Drill Attachment] ---- 105° Bend Narrow Space Available--Use in which you use when you have hard places to get to, can to connect a drill, rechargeable drill or manual wre....
Check Stock

VOLPORT Extra 3M Super Sticky Adhesive and Phone Magnet Sticker Disc Replacement Strong for Reusing Grip Stand Socket Base, Circle Double Sided Car Mount 3M Tape Glue Pads Round Magic Metal Plate Disk

  • DESIGN FOR PHONE SWAPPABLE GRIP&STAND: VOLPORT brand multiple 3M circular double side tapes sticky adhesion disk is designed for repairing expanding phone ring holder and replace magnetic phone car mount. Heavy duty two sided circle stickies adhesives fit regular size collapsible socket stand base & replaceable dashboard car holder’s back.
  • metal plates can be fit inside of lids or outside of the caps top. Best backup replacement adhesive parts to reattach socket grip to new iphone 11 case..
  • STRONG DOT ADHESIVE STICKY REPLACEMENT: We adopt original 3M VHB super adhesive black gel, stickiness is 40% stronger than cheap universal glue, high temperature resistance in hot Summer. 6pcs big round double side tape sticky foam adhesive tabs stuff for resticking collapsible grip and finger rings stand.
  • 2pcs additional high bond small dots mini circle discs attachment for reusing the bottom of phone socket mount, repositionable magnetic dashboard car phone mounts, reinforce dash cam mount..
  • HOW TO REPLACE ADHESIVE: 1. remove old adhesive and clean surface with alcohol prep pads, let dry, then stick adhesive on holder. 2. peel off the red backing film, this is the most difficult part, many customer said the adhesive part with come up with when pe....
Check Stock