Categories

Best Magnetic Sticky Pad

Scosche MPRNDRK-SP MagicMount Phone Replacement Plate Kit - for Magnetic Car Phone Mount Holder with Extra Strength Hold Universal with All Devices Black - Round

  • Replacement Kit - These metal magnetic stickers work with any magnet car phone holder mount. Simply stick the magnet plate pad to the backend of an....
  • Strong Hold - The hold acts like sticky pads and are made with a heat resistant automotive grade formula. Designed to provide a strong backing in all....
  • Universal Compatibility - Our metal phone plate works with any magnetic car cell phone holder. These round plates act like PopSocket sticky pads and....
  • Protective Film - Double sided sticky pads are designed to easily mount and remove the magnetic plate without damaging your phone. Ensure you apply....
  • Accessories Included - Large MagicPlates, small MagicPlates, protective film and user manual..
Check Stock

TAGVO Phone Ring Holder Finger Ring Kickstand and 3M Sticky Adhesive Replacement Set Including Metal Plates - 360°Rotation Metal Grip Holder for Magnetic Car Mount Compatible with Cell Phone

  • 【Metal Plate with Strong Adhesive】Super thin metal plate is designed to use with magnetic mobile phone car mount, magnetic air vent mount and other magnetic cellphone car mount. 1, Advanced surface treatment. 2, Storng adhesive on the back. 3, Scratch-Resistant Protective Films Included, simply stick magnet sticker for phone mount behind films to your case/battery cover, on a rugged case, or directly to your device. Then device will automatically suck as it closes to the car mount..
  • 【3M sticky adhesive replacements compatible with Phone Holder, Metal Plates, Magnetic Car Mount Holder】IMPORTANT NOTE: Here are some problem customer may encountered frequently. 1. Hard to peel off the red backing film, in this situation, please repeat this act: peel-if come up-press red film back-peel again. 2. Adhesive can’t stick well on phone case, please don’t not stick adhesion on rugged, texture surface silicone phone case, it may not stick well. 3. Last but the most important rule, wait.
  • 【Easy to use】You need to remove the used 3M tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3M adhesive sticky circles on the back of grip mount or phone case and pres....
Check Stock

3M Sticky Adhesive Replacement for Magnetic Dashboard Car Mount Holder Base, VOLPORT 5 Pack Rectangle Heat Resistance Double Side Tape VHB Sticker Pads for Dash Magnet Phone Mounts & Ring Grip Socket

  • For Dashboard Magnetic Mount Base: Volport rectangular 3M adhesive sticky replacement fit 95% stick-on dash magnetic phone car mount holder with rounded rectangle base on the market. When your magnet dashboard car holder lost its viscosity, these 3M double-faced tapes backup replacement parts mounting adhesives is a good way to re-stick/reuse dashboard car phone mount & Phone Dock. Size: 1.85″ * 0.87″, the thickness is 0.047″. Can be cut circle disk/disc to fit ring grip socket car mount’s back..
  • Heat Resistance Car Holder Adhesive: These iphone dashboard car mount backing stickers is high temperature(120℃+) resistance in hot Summer Texas. Extra strong both side squares 3M VHB dashboard cell phone mount replacement adhesion pads’s stickiness is 40% stronger than original 2 side sticky glue, easy to fix your car magnetic phone holder base, heavy duty dashboard mount 3M vertical adhesive sticker tab for car mount base, stable and secure driving uber, truck, jeep, vehicle in bumpy roads..
  • NOTE TO USE 3M CAR MOUNT ADHESIVE: 1.Please don’t stick the 3M replacement sticky adhesive pads on rugged, texture, grease or leather surface. 2.Make sure the desired surface is clean and dry, that means no wax, dirt or porous....
Check Stock

3M Sticky Adhesive Replacement APPS2Car Dashboard VHB Sticker Pads for Magnetic Phone Car Mount,Car Phone Holder Parts,4 Pcs Double Sided VHB Mounting Pads Car Phone Mount Base Sticker Tapes

  • ...uitable for stick many kinds of material with flat hard surface.It can be used in home bathroom mirror, refrigerator,bed post, wall, locker, office, driving personnel and other related equipment replace..
  • ➣Rectangular 3M VHB sticky adhesive tape can be used on the bottom of the most dashboard 360 degrees Rotation magnetic car phone mount holder, which is stable even in bumpy roads.It is a strong sticky adhesive replacement for phone car mount.Compatible with Wizgear,Bextrix,Scosche ,Trainium ,PLDHPRO ,Ailun etc.magnetic phone car mount..
  • ➣This 3M VHB adhesive pad is high temperature resistance and low temperature resistance,water-proof,Tear off non-trace..
  • ➣NOTE:(1),Please don’t stick the 3M adhesive pad on very soft, rugged, texture,grease surface or leather surface.(2),Make sure the desired surface is clean and dry.(3),The 3M VHB adhesive pad is one-time use.(4),It is recommended to wait at least 24 hours ensure the sticker get the best stickiness before use.(5),WORRY-FREE:APPS2Car comes with best-in-class customer service,and lifetime warranty.Please contact us immediately if you have any problem..
Check Stock

Extra Large & Thick Sticky Anti-Slip Pad for Car Dashboard, MINI-FACTORY Universal Non-Slip Grip Cell Phones, Sunglasses, Keys, Decoration Gadgets Mat for Car / Home / Office

  • Multi-purpose sticky pad for car, home and office, ideal for holding cell phone, perfume, key, glasses, perfume bottle, camera, laptop other gadgets and decorations..
  • Made of extra thick(3mm) quality anti-slip soft malleable gel, secure objects to your dashboard without worrying things slipping / falling while driving, universal fits for all car dashboard..
  • Extra large size holds most gadgets - 11" X 7" inch, temperature resistant, non-magnetic, no adhesive, no glue needed, can be used for car, home or office..
  • Cut to fit - this non-slip sticky gel pad is designed to use for multi-purpose usages, large size, can be cut down to smaller pieces according to your needs..
  • Reusable - you can use this non-slip pad for many times, to regain stickiness simply rinse the sticky pad using soap and water and you are good to go..
Check Stock

Bysameyee Anti-Slip Pad for Car Dashboard Non Slip Car Magic Sticky Adhesive Mat for Cell Phone Sunglasses Keys Radar Detector Large Size Fixate Gel Pad 10.6 x 5.9 Inch

  • Sticky Non-Slip Mat for Car Dashboard: Large size: 10.6*5.9Inches/27*15cm, universal fits for most car gadgets including radar detectors, cell phones, keychains, sunglasses, and makeup mirrors, coins, pens and etc. No worry about the sliding even when braking or in strong motion..
  • Soft, Stick, and Secure: The sticky mat is made of Environmental friendly material (PVC and silicone) with no adhesives, Reusable, removable, washable, and recyclable. Fix the gadgets securely. Water-resistant, temperature, and tear-resistant. Easy to adjust or reposition without tearing or losing shape..
  • Easy to Use & Long-last: Non-magnetic, no adhesive or glue needed, clings to almost any surface.
  • It can be directly stuck to a car, truck, SUV, etc. Heat resistance, the sticky pad can also be used in the bathroom, kitchen, or office..
  • Reusable & Renewable Tackiness: This fixable gel pads can be used many times, and will not leave any residue or damage to whatever you stuck them on. Rinsing under warm water and soap to clean and renew its stickiness..
  • Remark: To achieve the best-fixed effects, please place objects on the pad and press hard on the pad for 5 seconds.
  • Please keep the contact surface of the sticky gel pads clean and dry..
Check Stock

pop-tech Sticky Adhesive Pad Replacement for Car Dashboard Magnetic Phone Mount Base, 8pcs 3M VHB Double Sided Sticker Heat Resistance Tape for Magnet Cellphone Holder & Windshield Dash Cam

  • 【Compatible with Various Kinds of Dashboard Magnetic Mounts】 Pop-tech's extra adhesive tapes are made with 3M HVB original adhesive. When the base of your dashboard magnetic mount loses its stickiness, replacing the adhesive on the base of the holder is the best way. And our super sticky adhesive tape is your best choice! These magnetic dashboard mount base replacement sticky adhesive compatible with Wizgear, Scosche, Bextrix, APPS2Car, Trainium, etc..
  • 【Adhesive size】 Rectangle : 1.85" * 0.87", the thickness is 0.047". Perfectly suitable for 95% of dashboard mounting bases. It can be pieced together or cut to replace the base sticker tape of driving recorder, dash cam, ring grip mount, automotive windshield sticky mount, smartphone holder, audio DAC! Versatility: Stickers can be affix on flat hard surfaces, such as home bathroom mirrors, refrigerators, bedposts, walls, lockers, offices, dashboards, windscreen..
  • 【Very High Bond Stickiness & Heat Resistance】 Pop-tech's rectangular adhesive tape uses the most advanced silicone adhesive synthesis technology, and its steady viscosity is 40% higher than ordinary adhesive tapes. High tem....
Check Stock

[Newest] VANMASS Magnetic Phone Mount for Car, [Never Fall Off] Super Strong Magnets Car Mount Dashboard Phone Holder for Dash Windshield Air Vent, Compatible with iPhone Samsung & All Phones

  • [Grandmaster Design]: Industry-only made of Solid Aluminum Alloy & KING of Plastic, the 2023 Version took 6 years to optimize 117 models & test 156 kinds of material. Luxury look & streamlined alloy structure is certified by RoHS, CP65, REACH.
  • [No Block Your Driving View]: Millions of Users Prefer 3-stage Telescopic Alloy Arm - Longest, Sturdiest yet, unlike any other BULKY plastic stuff. 360° rotating magnetic head and 270° adjustable telescopic arm for adjusting any angle without blocking your view at all.
  • [4 Technologies for Top Safety]: 1) Extreme 9LB magnetic force for all devices 2) Extreme -40~194℉ resistance 3) Extreme 50 LBS sticky&suction force 4) Extreme 10,000 times vibration resistance. Thanks to Millions of users' voice, we are always keep upgrading.
  • [Never Worry About Your Phone Falling]: VANMASS magnetic phone holder for car brings super sticky suction cup & steel-cored vent clip from 3000+ surveys to accompany you anywhere.
  • [Luxury Present: Top-notch Configuration]: Exquisite magnetic car mount is fully protected in Elegant & Eco-friendly box. 1)Package included (1*suction cup, 1*vent clip, 1*pad, 1*manual, 4*metal plate) 2)Car/Desk/Kitchen/Bathroom/Gym, meet your multi-scenario use needs.
Check Stock

Pops Sticky Adhesive Replacement for Car Mount, Volport 6 Pack 3M Dots VHB Sticker Pads Double Sided Tape for Socket Base and Magnetic Dashboard Cell Phone Holder with 2 Pack Round Metal Plate Discs

  • ADHESIVE PADS FOR DASH MOUNT: 6pcs small 3M circles dots kit is designed for the base of expanding socket mount, collapsible grip stand, magnetic dashboard car mount, cell phone finger ring holder, wireless charger mount, dash cam mount, windshield mount.
  • Mini foam glue tapes high temperature resistant, no problem in hot/heat/warmth summer in florida. With this backup stickies adhesion replacement parts, you can replace and reattach phone socket wall mount and magnetic vehicle/truck/uber mount..
  • HOW TO USE 3M VHB ADHESIVE PAD: 1. Remove the used adhesive and clean up the mounting surface with alcohol pad if you have.
  • 2. Peel off the yellow backing film, stick adhesive to the back of mount and press firmly for 3 to 5 minutes for better connecting to the car mount base.
  • 3. Peel off the red backing film, stick on the flat and clean surface you want, then wait 24 HOURS to use after stuck, that’s it..
  • TIPS for USING 3M STICKY ADHESIVE: 1.If the red backing film hard to peel off and the black gel come up with, please repeat this act: peel-if come up-press red film back-peel again. 2.Do not stick adhesive on rugged, texture silicone surface, it may not stick well, clean flat and hard surface will be better. 3. Last but the most important point, please....
Check Stock

Sticky Adhesive Replacement for Magnetic Car Mount POP-TECH 8PCS Circular Heat Resistant 3M VHB Double Sided Strong Sticker Pads for Magnet Cell Phone Stand & Finger Ring Holder & Socket Grip Mount

  • Used for magnetic phone car mount: Exclusively designed for various magnetic cell phone car mount bases with a diameter about 1 inch (23 mm), the car....
  • Very High Bond 3M Automotive Adhesives Replacement: Selection of high-quality Genuine 3M VHB adhesive pad, 3m circle adhesive tape double sided,....
  • EASY TO USE: Just peel off the paper from both sides and stick the small sticky adhesive 2 sided pad to the item, and convenient to remove it, quick....
  • Extra alcohol pads: to maximize 3m vhb adhesive stickers contact, please clean the 3m double sided adhesive surface with alcohol pad before use and....
  • 100% Satisfactory Service: We provide 12-month warranty and lifetime technical support for best after-sale service. Please do not hesitate to contact....
Check Stock

Car Phone Mount Magnetic,APPS2Car Dashboard,Windshield and Air Vent Mount,Phone Holder for Car,Universal Magnetic Phone Car Mount with Powerful Suction Cup,Built-in Strong 6 Magnets for all CellPhones

  • .... Industrial-strength suction cup base with strong sticky gel and 3M VHB sticky dashboard pad, mounting the car phone mount firmly on the dashboard or windshield or other surface.Twist-Lock base, Tighten the nut to clamp the air vent blade firmly, longer air vent gripper base will not block the air outlet..
  • Powerful Magnetic Force: This magnetic car mount build in 6 pieces of N52 strong magnets, magnetic force is much stronger than other mount that only 4 pieces of magnets. Securely holds your phone in place even with your car on the bumpy of roads and with the heaviest of smartphones..
  • Broad Compatible:This car phone holder mount compatible with iPhone 13 13 Pro Max 13 Pro 13 Mini 12 12 Pro Max 12 Pro 12 Mini 11 11 Pro Xs Xs Max, Samsung Galaxy S21+ S21 S20 S20+ S10 S10+ S10e S9 S9+ S8 S8+ S7 S6, Note 20 Ultra 20 10 9 8 6 5, Nokia etc.all smartphones, although with thick case. And the suction cup base and 3M VHB dashboard pad fits well with most flat surface(not include leather, vinyl surface). Twist-Lock air vent base work well with vertical and horizontal air vent..
  • Adjustable View Angle for Safe Driving: 360 degrees rotatable swivel mount head with ball joint design and screw-nut Lock ensures secure positioning and optimal viewing, tighten the nut t....
Check Stock

MU-CN 12 PCS Replacement Adhesive Stickers for Pop Phone Stand Mount Double Sided Adhesive Pads Circle Sticky Compatible with POP Out Phone Collapsible Grip & Stand/Car Magnetic Phone Mount Holder etc

  • Cell Phone Holder Adhesive: 12 PACK VHB 3m sticky adhesive exclusively designed for grip holder back and various magnetic cell phone car phone mount base. This adhesive replacement kit is a good choice to remount your phone wall mount and magnetic phone mount. With your adhesive cell phone holder, you can position the phone anywhere there’s a flat and hard surface in the car dashboard.
  • Strong 3M Sticky Adhesives: With this car mount replacement parts, you do not worry about purchasing another grip mount. Just remount your expanding stand with this vhb 3m double sided adhesive pads. Best sticker replacement pads for your phone adhesive mount.
  • For best result, please make sure the mounting surface and base of mount adhesive clear cleaned completely before attaching a new 3m adhesive stickers. As for the 3m adhesive tapes, if you find the phone holder adhesive hard to peel, please try to press it back and peel again.
  • Easy to use: You need to remove the used 3m tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3m adhesive sticky circles on the back of grip mount and press firmly for 5 to 10 minutes for better connecting to the car mount base. please wait 24....
Check Stock

LISEN Magnetic Phone Holder for Car Fit Curved Surfaces Car Phone Holder Mount Flexible & Stable Dashboard Magnetic Phone Car Mount with 3 Metal Plates Fit All iPhone 14/13/12/11,Pro,Pro Max,Android

  • LEGENDARY STABLE MAGNETIC PHONE HOLDER FOR CAR: With 2 3M adhesive pads, 6 magnets and an adjustable arch bridge design, this is definitely the most revolutionary magnetic phone car mount on the market. 2 sticky pads firmly stick the mount to any flat or curved surface. 6 magnets can hold all large mobile phones with metal plates. Arch bridge adjustment design can provide a larger and better field of vision. You won’t find a second such powerful and ingenious phone mount for car on the market..
  • DOUBLE ADHESIVE PADS, LARGER STICKING AREA: This magnetic phone mount for car adopts the design of double 3M adhesive pads with a larger area, and the sticking area is at least 200% bigger than other ordinary single adhesive pad one. The larger sticking area can fit the curved dashboard to the maximum extent. Thereby improving the stability and durability of the adhesive magnetic car mount by 200%.That car phone holder mount comes with 2 additional high quality 3M adhesive pads for replacement..
  • GRAPHENE 3M ADHESIVE, EXTREMELY STABLE: The adhesive strength of this upgraded double-pad magnetic car phone mount is over 66 lbs. The graphene-based adhesive pad has gorgeous heat resistance and heat dissipation. Tested by LISEN laboratory, in an atmosphere of 12....
Check Stock