Categories

Best Magnetic Trailer Light

CZC AUTO 12V LED Magnetic Towing Light Kit for Boat Trailer RV Truck - Magnetic Strength 55 Pounds

  • STRONG MAGNETS: CZC AUTO 55 pounds magnetic trailer lights for towing holded so firmly to automobile metal surfaces, the lights will not fell off during working. You could also tie them to the trailer with zip ties if you need. Protective label on the base avoid surface scratches. Strong magnet but easy to remove by adult when you don't need them.
  • 2 SIDED TOWING LIGHTS: With 4.25'' red & amber lens, our magnet trailer lights work on both side, red on the back, amber on the front. Our portable trailer lights can be seen in the rear-view mirror, so you could check if they are working when you are driving. 12V wiring easily connect to most automotive electrical systems, great for cargo trailers, boat, ATVs, snowmobiles, and campers.
  • WORK OUT OF BOX: Use our towing lights with no splicing, the only wiring you might to do is on the tow vehicle. Wire distance between lights is 7'/84'', ideal for towing applications up to 80'' wide like trailer, truck, RV etc.. Wire harness length between 4 standard pin male connector and light unit is 20'/240'', easily connect. We offer 4 Quick Splice Wire Terminals for quick spli....
Check Stock

Master Tailgaters 19\ Wireless Trailer Tow Light Bar - Magnetic Mount - Ultra Bright LED with 4 pin Flat Hitch Transmitter

  • ...ress the switch of the light to switch to warning mode, during your work, you can warn the surrounding passing vehicles to ensure your safety..
  • EASY INSTALLATION -This wireless towing lights requires 8 x AA batteries (not included) and can be easily installed on the left and right rear of the truck metal. , Powerful magnetic base grips tightly while driving (tested up to 60 mph, but won't come off)..
  • EXCELLENT QUALITY- The magnetic base is made of stronger ABS plastic, which provides great insulation, impact and shock resistance, weather resistance, waterproof IP67 design, strong fog permeability, dustproof and anti-corrosion, working temperature -20℃~65℃, can also work normally in bad weather conditions, service life up to 50,000 hours..
  • WIDE APPLICATION - The magnetic tow lights The magnetic tow lights have a 4-pin to 7-pin wireless transmitter and is suitable for the widest range of vehicles, such as RV, campers, boat trailer, utility trailer, trailers, wrecker, agricultural equipment or jet skis, etc.(Not compatible with 2021 chevy Silverado. ).
Check Stock

FEELOTAM Magnetic LED Trailer Towing Light Kit 24ft Cable with 7 Pin Plug Board Tail Brake Stop Indicator License Plate Light Lamp for Trucks Trailers RVs SUVs

  • ...d brake lights and flashing orange Direction Indicator lights control by the separate circuit.
  • Just the 2 yellow light will lighting (not red brake light lighting)when brake if use it to 4-wire systems car..
  • Trailer towing Light come with 5 functions, 7 Pin Plug and strong magnetic, suitable for USA 5 wire shstems standard 12V trailer, Caravan , Low loaders , Jet ski Boats Break downs etc.
  • Out light come with 5 functions: Rear Position, Direction Indicator, Brake, Reflector, Number plate light(Right light no license plate light), but not has the back up lights, 24ft cable to light with a Standard 7 Pin Plug, fit for 5-7 wire flat Pin Adapter, then 8ft cable to go across to the the next light.
  • IP68 Waterproof and Submersible: All sealed, which means that water will not damage the diodes or circuit board, excellent tightness makes it be definitely waterproof and submersible.
  • Comes with 2 strong magnetic on the lights for quick and easy fitting an removal of the light.they handle bumpy roads without falling off. Easy to use, plug in and go..
Check Stock

Nilight Magnetic LED Trailer Towing Light Kit 24ft Cable with 7 Pin Plug Tail Stop Amber Turn Signal License Plate Light on 12V RV Pickup Trucks Marine Boats Trailers, 2 Year Warranty (5 Wire System)

  • ... IP68 entirely submersible: inside leds and circuit board is fully waterproof sealed to work under water perfectly without electric short risk, excellent tightness makes it be definitely waterproof and submersible.
  • Easy to install: Comes with 2 strong magnetic on the lights for quick and easy fitting and removal of the light. Just need to insert and secure the 7-pin socket into your existing 7-way trailer plug of the towing vehicle and then well route the wire along the trailer and place the magnetic lights at the rear position, they handle bumpy roads without falling off..
Check Stock

Blazer International C6304 LED Wireless Magnetic Trailer Towing Light Kit

  • Includes (2) stop/tail/turn LED lights, transmitter with standard 4-flat wire vehicle trailer light connector and trilingual instructions.
  • Provides over 65' of wireless operation and DOT compliant stop, turn, and tail functions for your trailer or towed vehicle.
  • Features a low battery indicator in one light (Requires (8) AA batteries, not included).
  • Non-scratch, heavy-duty magnetic base for secure mount.
  • Sonically sealed polycarbonate lens eliminates moisture and corrosion.
Check Stock

(2) Red Trailer Truck LED Sealed RED 6\ Oval Stop/Turn/Tail Light Marine Waterproof Including 3-pin Water Tight Plug DOT SAE with Wires and Grommet

  • TWO DIRECTION PROTECTION - Front-facing amber and rear-facing red lenses boost your oncoming visibility and overall safety. Additionally, the front-facing lights make it easier to keep an eye on your load when you're towing at night..
  • WATERPROOF - There are times when it's good to think about the waterproof rating of your towing lights, 2 AM on a rainy, poorly lit highway is not one of those times. Set your mind at ease with our fully sealed, IP67 rated LED towing light kit..
  • DOT COMPLIANT - Take the guesswork out of buying taillights online. Our magnetic towing light kit is DOT FMVSS-108 compliant and SAE STIP rated for use as brake lights, parking lights, turn signals and taillights..
  • SAFE AND SECURE - Our kits feature scratch-free 55lb pull force magnets designed to keep your lights firmly attached to your vehicle. Why so strong? Because magnetic trailer lights don’t work so well when they're dragging behind you on the ground..
  • LONG ENOUGH TO FIT - Equipped with 20' of harness between the trailer plug and the first light unit, 5' between the lights, a 4-pin plug, and scratch-free protective pads, these universal towing lights have you covered no matter what you're towing..
Check Stock

AUTO-VOX Magnetic Solar Wireless Backup Camera with Rechargeable Battery, Portable IR Night Vision Front/ Rear View Camera with Monitor for RV/Trailer/Truck/Boat

  • 【Portable Magentic Camera for Easy Hitch】Equipped with 2 strong magnets, the rear camera can instantly be attached to any metal surface via the magnetic base.No matter whether it’s sudden braking, bumpy road, or bad weather, the magnetic base will remain 100% stable and won’t fall off..
  • 【Industry-Leading Solar4 Wireless RV Backup Camera】With built-in 6600 upgrade battery capacity, no reverse light connected, no mechanical skills required. 10mins installation saves extra installation cost. Work independently and fit all RV and Trailer Pre-wired systems, Furrion, Voyager, etc..
  • 【Solar Powered Backup Camera for Continuously Supply】A larger solar panel captures more sunlight and efficiently converts it into electricity for the trailer backup camera. A durable battery span meets your long-term travel or driving needs without manual charging..
  • 【Enhanced IR Night Vision as RV Security Camera System】The back up camera with 2 powerful IR LEDs can illuminate the rear view range within 30ft. The backup camera presents a clear and full night vision without a halo, avoiding the misjudgment caused by an incomplete image, making you at ease when reversing at night..
  • 【RV Backup Camera with High Compatibility】Mount 2nd front/side camera at any des....
Check Stock

12V Trailer Led Light Kit, 2x Square Led Stop Turn Tail Brake License Plate Running Lights w/ 25ft Wiring Harness/6x Mini Marker Lights/15' 11LED Trailer Tail Brake Light Bar/License Plate Bracket

  • This 12v led trailer lights kit includes 2Pcs square rear combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15.5 Inch Trailer 3rd brake identification tail light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. This trailer led light kit has everything you need to upgrade your trailers at once.
  • This boat trailer lights led submersible kit has multi functions: stop light, brake light, turn signal light, tail light, running light, rear reflex reflector, side marker light, side clearance lights, side reflex reflector, license plate illuminator, clearance Light, third 3rd brake light bar.
  • Wiring Tips: white wire is ground, yellow wire is high brightness for brake Light and brown is low brightness as Running Light/Left License Plate illuminator(Square tail Lights).
  • white is ground, red is high Brightness for brake/stop/turn light, black is low brightness as running Light(15.5″ led trailer light bar).
  • white is ground andblack is positive(mini side marker lights).
  • Brightness: Square LED trailer light has 15 Diodes (12 Red+3 Red) as stop, turn, tail, side marker, side reflex, and rear reflex functions and on left side Built-in license plate light(3 w....
Check Stock

Partsam Red Clearance ID BAR Marker Light 3 Light 9 LED Trailer Sealed Stainless Steel, Sealed 3-Light Truck and Trailer Identification LED Light Bar Red Led Strip w/Black Base

  • Partsam (1 x Red ) Waterproof truck trailer Identification Light Bar, long-lasting stainless steel black bracket base, stainless hardware included. three-light, 3-LEDs each marker light, totally 9LEDs, Red Lens Red LED Light.
  • This Truck Trailer ID Light bar is great for trailer applications more than 80" wide.
  • This red clearance light bar is sealed and waterproof. Size: 350mm x 30mm x 26mm (14.17" x 1.18" x 1.1").
  • Installation scews are included. This IP67 Waterproof trailer light bar is always ready for different kinds of weather attack, and also withstand the invasion and corrosion of sand, dust, dirt, water, snow and other impact of inclement weathe.
  • EAST TO INSTALL: The red strip light bar contains a single lead wire for power and is grounded through the mounting hardware. Anyone of the three screws is the Negative and Red wire is the Positive end.
  • Three replaceable 3-LED trailer light bar is universal for 12V Vehicles: Trucks, trailers, travel trailer, boat trailer, horse trailer, camper trailer, cargo trailer, RV, motorhome, pickups etc..
  • You can mount this 3 led light bar on the top of your truck trailer or between the tailgate taillights to draw extra visibility to your wide trailer for added on-road safety.
Check Stock

Partsam 6" Rectangular LED Combination Tail Lights Kit Red, 12V LED Submersible Sealed Rectangular Boat Trailer Stop Turn Tail License Plate Brake Running Light Kit w/25ft Wiring Harness 4Pin+Bracket

  • Partsam LED Trailer Light Kits: package includes 2Pcs LED Combination Trailer Tail Lights, 25 feet wiring harness with a standard 4-way flat connector, license plate bracket, stainless steel mounting screw, bolt and hardware, perfect for trailers under 80" wide.
  • NOTE: Trailers over 80" require side clearance lights. If your trailer already have amber side lights you can use this light kit. Otherwise, please kindly refer to partsam 12v led low profile rectangular trailer light kit.
  • Functions: These rectangular combination tail lights do have built-in red side marker lights and serve as the following lighting functions when properly mounted: stop brake light, turn light, tail light, rear reflex, side marker, side reflex, license plate light(drive side only).
  • Different from many other 8 inch rectangular trailer taillights on market, these waterproof trailer light kit has different light dimensions about 5.9"L*3.35"W*2.28"H, which offers you more applications.
  • Sealed IP68 waterproof trailer lights: Submersible Rectangle LED trailer tail lights are equipt with the sealed circuit board and no screws on the lamp surface, which makes it ideal for ....
Check Stock

3 Wire Dump Trailer Remote Control Switch for Dump Trailer with 12V DC Single Acting Hydraulic Pumps Truck

  • Fit for most 12V DC single acting hydraulic pumps trailer--Monarch,Bucher Dyna-Jack,MTE,Bosch,SPX, KTI etc.Pls kindly check your hydraulic power unit....
  • Function:replacement for lift gate switch on dump trailer,up down switch remote control for dump trailer..
  • Easy to wire up:15’ cord enough long to stand at the back of dump trailer while dumping the load.
  • High quality:the 2-button pendant dump trailer remote control made by high impact plastic,well constructed..
  • Package:mounting holster +magnetic back + 3 Wires--Brown(power),Yellow(down),Blue(start).
Check Stock

Red Trailer Light Bar 3 Light 9 LED Clearance ID Bar Marker Tail Light for Trailer Truck Boat [DOT Certified, IP67]

  • 【Durability】 Red 9-LED Trailer Light Bar features stainless steel black base light, sealed waterproof pc lens, corrosion resistant and well protect leds from moisture and rain drops..
  • 【Application】 This led clearance light bar is universal for 12V vehicles: trucks, pickups, motorhome, travel trailer, boat trailer, horse trailer, camper trailer, RV, SUV etc..
  • 【Brightness】 Output Super Bright red light, more eye-catching without glares, easy warn the upcoming car to reduce accidental risks..
  • 【Easy To Install】 Size: 14.3" x 1.2" x 1.2".
  • Hole distance: 8.5". The id bar light contains one red wire hook up for power (+) and is grounded (-) via 6 optional screws on the back. Trailers measuring 80" or wider require identification lights for additional visibility.
  • mount this clearance light bar on the top of your truck/trailer or between the taillights to draw extra visibility to your wide trailer for added on-road safety..
  • 【Waterproof】 IP67 Waterproof trailer light bar always be ready for different kinds of weather attack, withstand the invasion and corrosion of sand, dust, dirt, water, snow and other impact of inclement weather..
Check Stock

Nilight TL-11 1PC Red 9 LED ID Bar Marker Tail Black Stainless Steel Bracket for Truck Trailer Boat Identification Light, 2 Years Warranty

  • Enhanced Visibility and Safety: For your trailer 80” or wider that requires identification light, the ID bar marker light mounted on the top or between the taillights draws extra visibility for the wide range, makes the light more eye-catching to warn the upcoming car. Enhance your on-road safety.
  • Top LED Quality: 9 upgraded Piranha LED, which feature wider lighting angle, higher intensity light, and better heat dissipation, is used on the trailer light to make it very durable and output bright light without glare.
  • Ready For All Weather Abuse: IP67 waterproof sonically welded light housing, durable ABS cover and the anti-corrosion black base bracket, make the lightly well protected to withstand all weather abuse.
  • Considerate Design for You: Comes with 2 wire leads for straight forward electrical connection, red wire to positive, black wire for negative. Mounting bracket also features notches and carefully added glue at the back for easy wire routing and perfect surface mounting.
  • Universal for any 12V vehicles more than 80” wide like trucks, pickups, travel trailer, boat trailer, horse trailer, camper trailer, cargo trailer, RV, SUV Motorhome etc. Package Include: 1x trailer light bar, 1x hardware pack.
Check Stock