Linear Rail Kits 2Pcs SBR20-2000mm(78.7 inch) Linear Rail with 4Pcs SBR20UU Bearing Linear Guide Slide Blocks for Fully Supported Linear Rail
- 2000mm Linear Rail Slider Set: This linear rail set is of 2Pcs SBR20 2000mm/78.7 inch linear rail and 4Pcs SBR20UU Block.
- Sports performance under high load or long stroke, high precision, smooth moving, low friction, high performance and easy to mount & dismount.
- Cooperate with open linear bearing to ensure excellent sports performance, and metal linear bearing, its more durable than Plastic linear bearing.
- Perfect combination of main axle and aluminum alloy support, which nicely stabilizes the original rail. Premier quality bearing blocks moves smoothly while using.
- Linear motion ball bearing set is widely used for digital 3D coordinate measuring equipment such as precision equipment or special machinery industry. Suitable for kinds of electronic equipment/guide bar, drive shaft, and pillar.
Check Stock
VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating
- EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
- The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
- Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
- These tools make the job simple and prevent damage to your bearings when pulling.
- Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
- For removal only, not intended for installation.
- FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
- Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
- Sizes permanently laser-etched on tool for easy identification.
- Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.
Check Stock1980-1985 454 BBC CHEVY 454 Engine Overhaul Re-Ring Kit
- Compatible with 1980-1985 454 BBC CHEVY 454 ENGINE.
Check StockCNS Main Rod Bearing Kit Compatible/Replacement for BMW E34 E36 E46 E53 E83 E60 E39 M50 M52 M54
- COMPATIBLE WITH: BMW E34 E36 E46 E53 E83 E60 E39 M50 M52 M54.
Check Stock
Baitcast Fishing Reel, Portable Winter Ice Fishing Reel Wheel Light Weight Ultra Smooth Aluminum Spinning Fishing Reel for Saltwater or Freshwater(Gold)
- SMOOTH AND DURALBE: The spinning reel is fortified with metal main shaft and components and equipped with ball bearings. Quality ball bearings and one instant stop oneway antireverse bearing give it ultrasmooth performance. And the friction is very small to ensures long use..
- PROFESSIONAL AND EXQUISITE: The body and box use the highest quality gear strength environmentally friendly metal materials and special mirror painting..
- PORTABLE AND EASY TO CARRY: Ultrathin body design, beautiful, light weight and convenient.The foldable metal handle(Left/Right Interchangeable) and casting line save a lot place which is portable conveniently. High quality aluminum spool for better casting and fewer line ..
- VARIOUS MODES FOR CHOICE: Perfect for ocean boat fishing, ocean rock fishing, ice fishing, ocean beach fishing, lake, river, reservoir pond, stream etc. Choose according your needs!.
- SMOOTH AND DURALBE: The spinning reel is fortified with metal main shaft and components and equipped with bal....
Check StockDNJ EK715E Engine Rebuild Kit for 2006-2011 / Subaru/Forester, Impreza, Legacy, Outback / 2.5L / SOHC / H4 / 16V / 2458cc / EJ253
- THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Full Gasket/Sealing Set.
- FITS: 06-11 Subaru / Impreza, Forester, Legacy, Outback 2.5L H4 SOHC Naturally Aspirated EJ253.
- FITMENT NOTES: w/o Oil Pump & Timing Belt Or Timing Kit, w/o Upper Int. Set, Rod Bearing w/ 52mm Journal.
- You are assured to receive a worldwide proven Engine Rebuild Kit quality part with OE quality fit and performance..
- IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock2Pcs SBR20 Linear Rail Length 1300mm 51.2 inch with 4Pcs SBR20UU Square Type Carriage Bearing Blocks Fully Supported Linear Rail
- SBR20-1300mm linear rail set includes 2 pieces of 1300 mm/51.2 inch long SBR20 rail shafts and 4 SBR20UU blocks. Sliding blocks to be used....
- CNC parts linear rails are made of bearing steel, linear Bearings made of quality bearing steel with aluminum alloy housing. Surface chrome plating....
- Industry-standard SBR block with high-precision linear bearing inside. The adjustment handle can adjust the tightness of the slider, standardized....
- Perfect combination of main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR....
- The linear guide rail is widely used in the automation machinery such as DIY CNC routers, lathes, machine tools, bending machines, laser welding....
Check Stock
DNJ EK1105M Master Engine Rebuild Kit for 2002-2003 / Dodge, Jeep/Liberty, Ram 1500/3.7L / SOHC / V6 / 12V / 226cid / VIN K
- THIS KIT INCLUDES: Piston Set, Piston Ring Set, Balance Shaft Bearing Set, Main Bearings Set, Rod Bearings Set, Head Gasket Set, Lower Gasket Set, Thrust Washer, Freeze Plug Set (Brass), Timing Chain Kit, Oil Pump.
- FITS: 02-03 Dodge, Jeep / Ram 1500, Liberty 3.7L V6 SOHC Naturally Aspirated.
- FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Master Kit Engines w/ Stamped Steel Valve Covers, Master Kit, w/ Steel Valve Covers.
- You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
- IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check StockKing \XP\ Racing Performance Main Rod Engine Bearing Set Compatible with 02 - 14 Acura / Honda 2.0L / 2.3L / 2.4L DOHC K20A2 K20 K23A1 K24A K24
- COMPATIBLE WITH: 02 - 14 ACURA / HONDA 2.0L / 2.3L / 2.4L DOHC K20A2 K20 K23A1 K24A K24.
- 1 KING RACING [XP] SERIES Crankshaft Main Bearing Set (Standard Size).
- 1 KING RACING [XP] SERIES Connecting Rod Bearing Set (Standard Size).
- 1 KING Thrust Washer Set (Standard Size).
Check Stock
OrangeA Linear Rail 2X HGH 20-1500mm Linear Slide Rail + 4X Pillow Block Carriage Bearing Block Linear Guideway Rail for Automated Machines and Equipments
- Complete Linear Rail Kits: This linear rail set includes 2pcs 59 in / 1500 mm long HGH20 rail shafts and 4pcs bearing pillow blocks. Sliding blocks are used cooperatively with rails, smooth sliding provided by the inside linear bearing..
- High-Quality Steel Material: CNC parts linear rails are made of carbon steel, linear bearings are made of quality bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful anti-rust, high hardness, more durable.EEL MATERIAL】- Linear bearing rails made of quality bearing steel. Beautiful and anti-rust surface treatment ensures durability, high hardness, and stiffness..
- Premier Linear Guiding System: Perfect combination of the main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with a high precision linear bearing inside..
- Easy to Install: Conveniently install the linear rail by aligning the track with the mouth of the slide rail and pushing the slide rail until the slide rail completely falls. It's no need for maintenance..
- Wide Application: The linear guide rail is widely used in automation machinery such as DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also, applicable for....
Check StockVital Parts BK371A / HV074 Transfer Case Rebuild Bearing and Chain Kit Fits GM Trucks NP 261XHD & NP 263XHD
- Our transmission rebuild & chain kits are of the highest quality and meet all standards set by professional installers.
- (HV074) - Chain specifications: 1.50" Wide / 42 links / Round Pin.
- Please verify your chain width prior to making your purchase. GM used 3 different chains in the NP261 & NP263 transfer cases..
- Kit Includes: (3) Main roller bearings (1) Caged needle bearing (1) Input to Output caged needle bearing Small Parts Kit, Gaskets Seals, O-rings Planet Thrust Washers.
Check Stock
OrangeA Linear Rail 2 Set SBR20-1000mm 2 Linear Rail Guide and 4SBR20UU Bearing Block Linear Slide Guide
- Complete Linear Rail Kits: This linear rail set includes 2pcs 39.4 in / 1000 mm long SBR20 rail shafts and 4pcs SBR20UU blocks. Sliding blocks are used cooperatively with rails, smooth sliding provided by the inside linear bearing..
- High-Quality Steel Material: CNC parts linear rails are made of carbon steel, linear bearings are made of quality bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful anti-rust, high hardness, more durable..
- Premier Linear Guiding System: Perfect combination of the main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with a high precision linear bearing inside..
- Easy to Install: Conveniently install the linear rail by aligning the track with the mouth of the slide rail and pushing the slide rail until the slide rail completely falls. It's no need for maintenance..
- Wide Application: The linear guide rail is widely used in automation machinery such as DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also, applicable for large-scale transmission equipment, including industrial robots, cracker machines..
Check Stock
OrangeA Linear Rail Guide 2X SBR20-1800mm Linear Guideway Rail + 4 SBR20UU Block for 20mm Fully suppoeted Shaft Rod
- Complete Linear Rail Kits: This linear rail set includes 2pcs 86.5 in / 2200 mm long SBR20 rail shafts and 4pcs SBR20UU blocks. Sliding blocks are used cooperatively with rails, smooth sliding provided by the inside linear bearing..
- High-Quality Steel Material: CNC parts linear rails are made of carbon steel, linear bearings are made of quality bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful anti-rust, high hardness, more durable..
- Premier Linear Guiding System: Perfect combination of the main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with a high precision linear bearing inside..
- Easy to Install: Conveniently install the linear rail by aligning the track with the mouth of the slide rail and pushing the slide rail until the slide rail completely falls. It’s no need for maintenance..
- Wide Application: The linear guide rail is widely used in automation machinery such as DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also, applicable for large-scale transmission equipment, including industrial robots, cracker machine..
Check Stock
