Categories

Best Main Control Valve

HZ-MONSTAR Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit with Igniter Assembly Fire Pit Igniter, Push Button Ignition Kit for Gas Grill, Heater, Fire Pit

  • [APPLICATION] --- The fire pit gas control valve kit suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater (max BTU rating: 50000 working pressure 65mbar)..
  • [UPGRADED-BUTTON IGNITER] --- The upgraded button igniter also greatly reduces the time required to generate sparks. The fire pit igniter using pop-up switch, more to meet people's needs..
  • [HIGH QUALITY] --- The fire failure safety control valve kit are made of brass material with heavy-duty construction for durable use..
  • [SPECIFICATION] --- Low Working Pressure Max 1/2 PSI（65mbar）, CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread. And length of thermocoupler 600mm Head Tip M8*1 (This is Low pressure control valve max rating BTU 50000). Platic Black Bakelite Knob Diameter 38mm and "D" Insert for Valve 6.0-6.1mm..
  • [Service Warranty]---We offer 1 year warranty. If it fails, feel free to contact us. we will reply within 24 hours..
Check Stock

P1TOOLS Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit （Low Pressure Propane Valve with 3/8\ Flare Inlet & Outlet）, Suitable for Gas Grill, Heater, Fire Pit

  • Low Working Pressure Max 1/2 PSI（65mbar）, CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread.
  • Material: The fire pit gas control valve kit are made of high quality brass material with heavy-duty construction for durable use..
  • Size: Thermocouple Length: 600mm/23.62inch.
  • Application: Suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater.
  • For more installation details and possible problems, see the detailed description below.This universal valve assembly requires some hands-on capability for DIY replacement..
Check Stock

MeTer Star Propane lpg Gas fire Pit Control Safety Valve Flame Failure Device Cock Gas Heater Valve with thermocouple and knob

  • Length of Thermocoupler 600mm Head Tip M8*1 (This is Low pressure control valve max rating BTU 50000).
  • When installing, make sure that the installation position of each part is accurate, incorrect installation can lead to unusable, especially thermocouples..
  • Low Working Pressure Max 1/2 PSI（65mbar）, CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread.
  • Platic Black Bakelite Knob Diameter 38mm and "D" Insert for Valve 6.0-6.1mm.
  • Suitable for all kinds of low pressure heaters, BBQ stove and ovens.Need to push valve first then turn the spindle and hold for few seconds, it cannot stick immediately may need 5-15Seconds003cbr003ePlease contact us if you are missing an acce.
  • For more installation details and possible problems, see the detailed description below.This universal valve assembly requires some hands-on capability for DIY replacement, please confirm that you have any questions please contact us..
Check Stock

BRIGHT SHOWERS Water Flow Control Valve Brass Shower Head Water Valve with Handle Lever Flow Regulator Water-Saver Volume Oil-Rubbed Bronze

  • High Quality: Brass body construction provides much higher performance, not only durability than plastic ones, but also high heat-resistance and pressure-resistance, it can serve many years without leakage..
  • Water Flow Controller: BRIGHT SHOWERS shower flow control valve is designed to adjust water flow according to your needs, it works great when you want the water temperature to stay the same but need to conserve water..
  • Universal Connections: Universal G1/2 standard thread connections of this shut off valve, fits all standard hand showers, fixed shower head or bidet sprayer..
  • Easy to Operate: The water flow control valve is tight thread, stable and non-slip design, Lever handle can be operated easily and smoothly. Please don't shut off this flow control , keep a trickle so you will not forget to turn off the main valve handle after taking a shower..
  • Easy To Install: Installs in minutes, no plumbers required..
Check Stock

Smart Water Valve,Wifi Control Water/Gas Shut Off Valve APP Remote,Voice Control Timing Controler,Compatible with Alexa Google Assistant IFTTT,Automatic Valve Wide Range of Uses Kitchen Garden Farm

  • ▶[Voice Control] - This Smart Wifi Water Valve Compatible with Alexa(Echo Show/Echo Dot/Echo Plus), Google Assistant(Google Home),APP(Tuya Smart /....
  • ▶[Control from Anywhere and Timing] - Only for ball valve!! Not support 1 5" main valvesFit on 1/2'', 3/4'', 1'', 1 1/4'' pipes, Use "Tuya Smart /....
  • ▶[Wide Applicability] - This Smart Home Automation System prevent water/gas leaks(add water leak sensors) etc.Valve Compatible with water pipe ball....
  • ▶[Humanized setting] - This wifi water valve can work automatically with water sensors pretty easily, Turn off water valve when detecting water....
  • ▶[Installtion and Service] - Easy installation, Applicable to new and old gas water pipeline valves, no additional piping, users can install it....
Check Stock

OEM UPGRADE 5221ER1003A 5220FR2006H Washer Water Inlet Valve by Beaquicy - Replacement for Ken-more L-G Washing Machine

  • ✅【IDEAL REPLACEMENT】: ◆5221ER1003A Washing Machine Water Inlet Valve can control the flow of water into the washing machine. There are one inlet (standard hose fitting) and 3 outlets (2 of the outlets face 45 degrees to the right, one outlet faces 45 degrees to the left). This valve is used for cold water fill and pre-wash.◆5220FR2006H Washing Machine Water Inlet Valve for Hot Water controls the water flow into the washer. This inter valve has a standard hose fitting inlet and one water outlet..
  • ✅【OEM UPGRADE IMPROVED】: The package includes 1 x 5221ER1003A Cold Water Inlet Valve, 1 x 5220FR2006H Washer Hot Water Inlet Valve. They are made of durable high-quality materials, well tested by the manufacturer, upgraded and improved on the basis of the OEM, and added metal strainer to the inlet of hose fittings. The standard hose fitting of 5221ER1003A is changed to yellow for better distinction and the main body is in aquamarine blue. The main body of 5220FR2006H is in turquoise green..
  • ✅【WIDE COMPATIBLE】: 5221ER1003A Washer Water Inlet Valve and 5220FR2006H Washer Water Inlet Valve for Hot Water can fit for Ken-more, L-G washing machine. ★5221ER1003A replaces numbers: 5221ER1003C, 5221ER1003D, 5221ER1003F, 4322702, AP5986564,7964153....
Check Stock

KIMISS Car Transmission Solenoid Valve 28250-PRP-013 for Honda and Acura Models Transmission AT Clutch Pressure Control Linear Solenoid Valve 13 * 7cm / 5.1 * 2.8in

  • 【Main Function】This Transmission Solenoid Control Valve is consisting of a spring loaded plunger wrapped with a coil of wire, designed to open or close valves in the valve body to allow transmission fluid to enter..
  • 【Specially for for for for Honda Models】Our Transmission Linear is Specially designed to fit For Acura & for for for Honda vehicles. Please check the size and compatibility carefully before placing an order..
  • 【Professional OE Level】The prossional car transmission shift solenoid valve is an important vehicle electrical system executive control part with higher stablity and reliability, meeting or exceed OEM standards. The replaceable OE number for reference: 28250-PRP-013..
  • 【High Quality Construction】Made of high grade iron, the AT Clutch Solenoid Valve is of strong strength, high temperature and resistance for long time use..
  • 【Easy Installation】Plug and play. Easy to install without extra adjustment, perfectly match the original car. Convenient for assembly and disassemble.If you have any questions, please feel free to firstly check product description for a good solution..
Check Stock

Liyafy 90-120 PSI Air Compressor Pressure Control Switch with Pressure Regulator Gauges Relief Safety Valve Fittings Set

  • It can easily adjust the air compressor to control the pressure and is low power consumption..
  • Quality tested for maximum reliability and high performance in even the toughest environments..
  • The main function of the valve is to adjust the air compressor to close and start the pressure.
  • Users can adjust according to their actual situation..
  • Right red is the safety valve. The air regulator on both sides of the copper is an exhaust valve that opens the gas when used..
  • Dual pressure gauges can display pressure more quickly and conveniently adjust pressure.
Check Stock

Garberiel Valve Core Remover Installer Tool with Dual Size SAE 1/4 & 5/16 Port for R22 R12 R407 R410 R404 R32 R600 A/C Include 5 Valve Cores with Teflon Seal

  • 【Great Function】The valve core remover installer tool’s core grabber tool makes it be easily inserted into the inner valve core to control the....
  • 【Extensive Usage】Suitable for all refrigeration equipment, dual size( SAE 1/4'' & 5/16'' Port ) design makes the valve core remover installer tool....
  • 【Premium Quality Valve Sets】The valve core remover installer tool is made of high quality thicker brass and rubber, the metal knob is all designed....
  • 【Main Features】Anti-slip design, increase hand friction, prevent all kinds of overpowered valves.
  • High-quality craftsmanship probes, rugged and....
  • 【Good Deisgn】Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate....
Check Stock

WADEO Valve Core Remover Installer Tool with Dual Size SAE 1/4 & 5/16 Port 4 Valve Cores with Teflon Seal Compatible with R22 R12 R407 R410 R404 R32 R600 A/C

  • Great Function: The valve core remover installer tool’s core grabber tool makes it be easily inserted into the inner valve core to control the core.....
  • Premium Quality Valve Sets: The valve core remover installer tool is made of high quality thicker brass and rubber, the metal knob is all designed....
  • Extensive Usage: Suitable for all refrigeration equipment, dual size( SAE 1/4'' & 5/16'' Port ) design makes the valve core remover installer tool be....
  • Main Features: Anti-slip design, increase hand friction, prevent all kinds of overpowered valves.
  • High-quality craftsmanship probes, rugged and....
  • Good Deisgn: Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate....
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ..., Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
  • Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount of liquid. Stable base avoids dumping.
  • The main hose is 80" long, with a quick plug on one side to connect the container, and a quick coupler on the other side to connect the dipstick tubes or ATF adapters. There is a b....
Check Stock

Weber 66754 Set of 2 Lighted Main Burner Control Knobs for Genesis II LX (Model Years 2017 and Newer).

  • Genuine Weber part 66754 Set of 2 "lighted" main burner control knobs for Weber Genesis II "LX" (model years 2017 and newer)..
  • The 2-7/8" diameter knobs feature a gray plastic body with chrome trim, translucent skirt for emitting light, a red position indicator and a rain boot on the valve stem shaft. The valve stem shaft extends 3/8" beyond the bottom edge of the knob..
Check Stock

Forged Stainless Steel Diaphragm Valve 316l Tri-Clamp Diaphragm Valve Silicone Seal 1.5 Inch for Controlling Ultra-Pure Sterile Corrosive Or Abrasive Fluids

  • ♛ SPECIFICATION - medium temperature: -10°C~+150°C.
  • sealing material: EPDM, PTPE, silicone resin.
  • surface polishing accuracy um: external Ra .
  • ♛ CONTROL FLUID - This forged/cast stainless steel diaphragm valve is suitable for controlling ultrapure, sterile, corrosive or abrasive fluids..
  • ♛ WORKING PRINCIPLE - stainless steel diaphragm valve is sealed from harsh fluids by high-quality neutral chemical diaphragms for a variety of applications..
  • ♛ APPLICABLE PLACES - The stainless steel diaphragm valve can be used in different fields such as food, beverage, pharmaceutical, biotechnology, semiconductor industry and so on..
  • ♛ THE PACKAGE CONTAINS - 1 valve.If you have any questions, you can contact KOUGER customer service, we will give you a satisfactory answer within 24 hours!.
Check Stock