Categories

Best Main Extruder Unit

RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board Support 3D Printer Controller Shield Board Module for Ramps 1.4 Reprap Prusa Mendel

  • Fully assembled & tested, no soldering required, Can be extended to control other accessories..
  • It has Cartesian robots and requirements of the extruder, Heated bed control with additional 11A fuse. Fits up to 5 stepper driver board..
  • Three field effect transistors, three heater / fan output ports, three thermistor circuits.A number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack..
  • The fifth stepper motor output port can be customized as a Z-axis motor or a second extruder.Pololu board foot socket, can be easily replaced or removed..
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion..
Check Stock

Saiper Flexible Couplings 5mm to 8mm (5pcs) Aluminum Alloy Joint Connector Compatible with NEMA 17 Stepper Motors, RepRap 3D Printer or CNC Machine, 3D Printer Accessories

  • Fully assembled & tested, no soldering required, Can be extended to control other accessories..
  • It has Cartesian robots and requirements of the extruder, Heated bed control with additional 11A fuse. Fits up to 5 stepper driver board..
  • Three field effect transistors, three heater / fan output ports, three thermistor circuits.A number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack..
  • The fifth stepper motor output port can be customized as a Z-axis motor or a second extruder.Pololu board foot socket, can be easily replaced or removed..
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion..
Check Stock

BCZAMD 3D Printing Upgrade Parts Ender 3 Direct Drive Extruder Conversion Kit Complete Set Requires No Firmware or Wiring Modification fit for Ender 3/ Pro/Ender 3X/ CR10 Series Printer Accessories

  • 1. Fits perfectly on your creality series printers, include Ender 3 Pro, Ender 3, Ender 5, CR10.
  • 2. Material: no 3d printed parts, all metal main plate, comes with a kit, so you need to assemble by yourself, install instruction, please reference....
  • 3.This kit is a great little light kit that moves your extruder from the side with a bowden line to the top of your hot end. It obviously adds the....
  • 4. Work well for most filament, expecial very good for flexible filaments, had no problem printing TPU with this setup..
  • 5. Compatible with most extruder hotend, but you need to print a printing before install on V6 hotend, please reference on thingiver..
Check Stock

Creality Official Upgrade Extruder MK8 Extruder Alloy Block Bowden Extruder 1.75mm Filament for Ender 3 Series Ender 5/5 Plus/Pro CR-10 Series 3D Printer

  • COMPATIBILITY--- All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about....
  • UPGRADE METAL EXTRUDER---The upgrade Creality3D silver metal Bowden extruder is an update for the plastic extruder. Upgrade your Creality 3D Printer....
  • WORK BETTER--- the extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printers'....
  • EASY TO ASSEMBLE--- Our metal extruder kit includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic....
  • OFFICIAL HIGH QUALITY--- Full metal aluminum alloy material makes our extruder kit more stable and durable. And it has stronger pressure pushing the....
Check Stock

Official Creality 3D Extruder Feeder Drive MK-8 Aluminum Upgraded 1.75mm for CR-10 Ender 3 CR-10S (Black)

  • 【Upgrade Black Extruder】All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about filament scraping or breaking. This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware..
  • 【Wide Application】The upgrade Creality3D silver metal Bowden extruder is compatible with nearly all models of 3D printers(Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro). No need to change stepper motors or other mounting hardware..
  • 【Very Easy to Install】 Unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. Our metal extruder kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame.
  • 【Durable】 All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • 【Official Creality Original Quality】This high-quality all-aluminum construction is guaranteed to last for years,....
Check Stock

Bowden Extruder V2.1 RNC Nano Coated Gear DDB Universal Geared Extruder for 3D Printer

  • Kit includes: 1pc Universal Geared Extruder w/ RNC Nano Coated Gear, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket.
  • Upgraded High performance extruder for 3D Printer.
  • Upgrade Highlights: 1. The position of the gears and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.1 version of the DDB extruder support filament running thru in and out (it has no specified direction, and you are able to use either side of the material ports).
  • 3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running smoothly. 4. The new outer shell design with edge cut on the top of the extruder is reserved for the screw rod of Ender 3 printer. 5. Upgraded shell using new mixed materials.
  • ***Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully.
Check Stock

Official 3D Printer Extruder Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series

  • ✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term....
  • ✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture....
  • ✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly....
  • ✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are....
  • ✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini,....
Check Stock

3D printing without prior knowledge: 7 days to your first 3D print (Become an Engineer Without Prior Knowledge)

  • 【Design Concept】X-CF PRO is a 3d printer specially designed for printing carbon fiber and nylon filaments.Independent research and development of the latest generation single extruder system, which uses high-temperature alloy material, dual-gear extrusion, can solve the problem of the accuracy is not very accurate or service life is not long when printing carbon fiber. Another set of normal high-speed extruder can easily print PLA, ABS, PETG and other filaments..
  • 【Precision Manufacturing Process】QIDI TECH using industrial-grade manufacturing, dual z-axis and industrial guide, can achieve high precision, fast printing. Upgrading the XYZ structure, all use of industrial slides. PEI printing plate, solve printing models warp and other problems.The 3d printer’s structure is developed for the effective and accurate printing of carbon fiber.Meanwile, printing other common filaments, the speed can be increased to 120cc per hour..
  • 【New technology upgrade】 A new automatic intelligent leveling mode, taking points up to 20 points to calculate the travel prime. With the new upgraded software, it is more intelligent, especially provide more effective and accurate p....
Check Stock

Redrex Ender 3 Extruder Bowden Aluminum Upgraded with 40 Teeth MK8 Drive Gear Kit Compatible with Creality Ender 3V2 /Ender 3 Pro/CR-10 Series and Other Reprap Prusa 3D Printers [Right Hand]

  • 【Application】:This metal extruder is compatible with Creality Ender 3 V2,Ender 3 Pro,Ender 3,CR-10,CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10....
  • 【Direct Drive Extruder】:The upgrade extruder supports direct extrusion.A direct drive extruder improves extrusion and retraction by removing the....
  • 【Filament】：The extruder feeder supports PLA/ABS/Wood/Hips/Flexible/PTEG,with 40 teeth drive gear feeds the 1.75mm filament very smoothy..
  • 【Durable Feeder】:The extruder feeder is made of heavy-duty aluminum alloy material,which is more durable and stable than the plastic one..
Check Stock

Cra-Z-Art Disney Junior Minnie Mouse Deluxe Kitchen Set

  • Kids will love making pretend Minnie Mouse treats with the colorful Softee Dough, rolling pin, dough cutters and other accessories.
  • This Minnie Mouse kitchen supports kids creative play while engaging important fine motor skills and STEM and STEAM creativity.
  • Kitchen molding set includes: kitchen unit, 3 bright Softee Dough colors, molds, extruder, and dough accessories.
  • Softee Dough is clean, easy to use, and non-toxic.
Check Stock

Creality Upgraded MK-8 Metal Feeder Extruder Frame Aluminum Gray Bowden Extruder Drive for Creality Ender 3/3 Pro/3V2/5/5 Plus, CR-10 Series, CR -10S/20/20 Pro 3D Printer

  • WIDE APPLICATION: The extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware. Suitable for Creality 3D Printers Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro..
  • ADVANTAGES: Pushing the filament into the printer nozzle with more pressure to improve the performance of the printer. The bolt of our extruder kits is adjustable so that you can adjust the pressure of the extruder gear as needed..
  • EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. This extruder DIY kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame..
  • STABLE: All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • CUSTOMER SUPPORT - If you have any problems with our product, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you..
Check Stock

Bowden Extruder Upgraded V3.0 Dual Drive Gear High-Performance Parts for CR10,Ender 3 Series,Anycubic Mega S, I3 Mega Chiron,Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer

  • Latest Dual Drive Extruder for Most 3D printers..
  • Update1: SIMAX3D Dual Gear Extruder V3.0 make an independent feeder inside to make filament wiring go inside and out super smoothly..
  • Update2: SIMAX3D Dual Drive Extruder V3.0 change the bowden buckle to pneumatic connector, you’re able to switch only this part after long time use instead of the whole extruder..
  • Update3: This Geared Extruder has an angle for Z-rod which is adapted to those 3D Printer who has an close Z axis installed like Ender 3 old version..
  • Package Include: User Manual*1. SIMAX3D Dual drive extruder set *1.
Check Stock

Cuisinart SM-35 Precision Master 3.5 Quart (White) stand mixer

  • Powerful 350-watt motor is made of Die-cast metal construction with 3.5-quart stainless steel mixing bowl with handle.
  • Unit has tilt-back head that allows easy access to mixing bowl, 12 speeds for precision mixing and a power outlet for use with optional attachments.
  • Includes: chef’s whisk, flat mixing paddle, dough hook, and splash guard with pour spout, instruction manual and recipe book.
  • Compatible with Cuisinart accessories: Pasta Extruder (PE-50), Pasta Roller & Cutter Set (PRS-50), Meat Grinder (MG-50), Spiralizer/Slicer/Shredder (SPI-50).
Check Stock